1. A study of the palladium size effect on the direct synthesis of hydrogen peroxide from hydrogen and oxygen using highly uniform palladium nanoparticles supported on carbon

Youngjin Ye Jinyoung Chun Sunyoung Park¹ Tae Jin Kim² Young-Min Chung² Seung-Hoon Oh² In Kyu Song¹ Jinwoo Lee^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1115-1118(4), 10.1007/s11814-012-0033-0

Download PDF

2. TiCl4 hybridization with modified Ni(II) α-diimine catalyst complex for ethylene polymerization

Yong Beom Lee Seung Hyun Hur Bijal Kottukkal Bahuleyan¹ Il Kim^1† Jin Suk Chung^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1119-1122(4), 10.1007/s11814-012-0034-z

Download PDF

3. Estimation of nitrous oxide emissions (GHG) from wastewater treatment plants using closed-loop mass balance and data reconciliation

JungJin Lim Boddupalli Sankarrao TaeSeok Oh MinJung Kim OnYu Kang JeongTai Kim¹ ChangKyoo Yoo^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1123-1128(6), 10.1007/s11814-011-0283-2

Download PDF

4. Cost of energy analysis of integrated gasification combined cycle (IGCC) power plant with respect to CO2 capture ratio under climate change scenarios

Kyungtae Park¹ Dongil Shin² Gibaek Lee³ En Sup Yoon^{1 4†}

Korean Journal of Chemical Engineering, September 2012, 29(9), 1129-1134(6), 10.1007/s11814-011-0295-y

Download PDF

5. Development of a novel self-validating soft sensor

Yiqi Liu^† Daoping Huang Yan Li Xuefeng Zhu

Korean Journal of Chemical Engineering, September 2012, 29(9), 1135-1143(9), 10.1007/s11814-011-0289-9

Download PDF

6. Numerical method for heat transfer and fouling analysis of a shell and tube heat exchanger using statistical analysis

Dillip Kumar Mohanty^† Pravin Madanrao Singru

Korean Journal of Chemical Engineering, September 2012, 29(9), 1144-1150(7), 10.1007/s11814-012-0003-6

Download PDF

7. CO oxidation over CuO catalysts prepared with different precipitants

Jung-Hyun Park Jun Hee Cho Kyung Ho Cho¹ Tae Woo Lee² Hyun Sik Han² Chae-Ho Shin^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1151-1157(7), 10.1007/s11814-012-0038-8

Download PDF

8. Estimation of approximate activation energy loss and mass transfer coefficient from a polarization curve of a polymer electrolyte fuel cell

Sung-Hyun Yun Jung-Je Woo Seok-Jun Seo Tae-Hyun Yang¹ Seung-Hyeon Moon^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1158-1162(5), 10.1007/s11814-012-0006-3

Download PDF

9. Pinch based approach to estimate CO2 capture and storage retrofit and compensatory renewable power for South Korean electricity sector

Muhammad Ilyas Youngsub Lim Chonghun Han^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1163-1170(8), 10.1007/s11814-011-0302-3

Download PDF

10. Application of iron-coated zeolites (ICZ) for mine drainage treatment

Chil-Sung Jeon Sung-Woo Park¹ Kitae Baek^2† Jung-Seok Yang³ Joon-Gyu Park¹

Korean Journal of Chemical Engineering, September 2012, 29(9), 1171-1177(7), 10.1007/s11814-012-0013-4

Download PDF

11. Electrochemical degradation of phenol on the La and Ru doped Ti/SnO2-Sb electrodes

Haiqing Xu^{1 2} Ai-Ping Li² Qi Qi^{1 3} Wei Jiang¹ Yue-Ming Sun^1†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1178-1186(9), 10.1007/s11814-012-0014-3

Download PDF

12. Preparation and characterizations of activated carbon from kenaf fiber for equilibrium adsorption studies of copper from wastewater

Zaira Zaman Chowdhury^† Sharifuddin Mohd. Zain Rashid Atta Khan Md. Sakinul Islam¹

Korean Journal of Chemical Engineering, September 2012, 29(9), 1187-1195(9), 10.1007/s11814-011-0297-9

Download PDF

13. Deterioration of denitrification by oxygen and cost evaluation of electron donor in an uncovered pre-denitrification process

Seung Joo Lim^† Tak-Hyun Kim Tae-Hun Kim In Hwan Shin

Korean Journal of Chemical Engineering, September 2012, 29(9), 1196-1202(7), 10.1007/s11814-012-0004-5

Download PDF

14. Electro-Fenton treatment of synthetic organic dyes: Influence of operational parameters and kinetic study

Prabir Ghosh^† Lalit Kumar Thakur Amar Nath Samanta Subhabrata Ray

Korean Journal of Chemical Engineering, September 2012, 29(9), 1203-1210(8), 10.1007/s11814-012-0011-6

Download PDF

15. The effects of culture condition on the growth property and docosahexaenoic acid production from Thraustochytrium aureum ATCC 34304

Kyeong Ho Min Hwan Hee Lee Periasamy Anbu Bidur Prasad Chaulagain Byung Ki Hur^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1211-1215(5), 10.1007/s11814-011-0287-y

Download PDF

16. Influence of sodium dodecyl sulfate and cetyl trimethylammonium bromide upon calcium carbonate precipitation on bacterial cellulose

Marta Stroescu Anicuta Stoica-Guzun^† Sorin Ion Jinga Tanase Dobre Iuliana Mihaela Jipa Loredana Mihaela Dobre

Korean Journal of Chemical Engineering, September 2012, 29(9), 1216-1223(8), 10.1007/s11814-011-0290-3

Download PDF

17. Evaluation of sediments of the waste from beer fermentation broth for bioethanol production

Jung Hwan Ha¹ Min-Kyung Gang¹ Taous Khan^{1 2} Joong Kon Park^1†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1224-1231(8), 10.1007/s11814-011-0293-0

Download PDF

18. Adsorption of Ni(II) on ion exchange resin: Kinetics, equilibrium and thermodynamic studies

Baybars Ali Fil^† Recep Boncukcuoglu Alper Erdem Yilmaz Serkan Bayar

Korean Journal of Chemical Engineering, September 2012, 29(9), 1232-1238(7), 10.1007/s11814-012-0012-5

Download PDF

19. Profit maximization of the normal hexane recovery process through a thermal integration method

Hye-Ran Kim Dong Sun Kim^1† Jungho Cho¹

Korean Journal of Chemical Engineering, September 2012, 29(9), 1239-1245(7), 10.1007/s11814-011-0296-x

Download PDF

20. Steam regeneration of acetone and toluene in activated carbon and dealuminated Y-zeolite beds

Dong-Geun Lee Yun-Jin Han Chang-Ha Lee^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1246-1252(7), 10.1007/s11814-012-0044-x

Download PDF

21. Excess molar enthalpies of ternary and constituent binary systems {1,2-dichloropropane+2-propanol+2-butanol} at T=298.15K

Moon-Gab Kim^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1253-1258(6), 10.1007/s11814-012-0045-9

Download PDF

22. Electroless deposition of NiMoP films using alkali-free chemicals for capping layers of copper interconnections

Hae-Min Lee Heeyeop Chae¹ Chang-Koo Kim^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1259-1265(7), 10.1007/s11814-011-0301-4

Download PDF

23. Modeling studies on the effects of the process parameters in forced-flow chemical vapor infiltration reactor for the preparation of C/C composites

Dong Geun Hwang Gui Yung Chung^†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1266-1271(6), 10.1007/s11814-011-0303-2

Download PDF

24. Preparation and characterization of ophthalmic polymers containing silicon nanoparticles

A-Young Sung^† Tae-Hun Kim¹

Korean Journal of Chemical Engineering, September 2012, 29(9), 1272-1278(7), 10.1007/s11814-012-0002-7

Download PDF

25. Synthesis of molecularly imprinted polymers from AnAc for the separation of γ-oryzanol

Amaraporn Kaewchada Chunyawat Borvornpongsakul¹ Attasak Jaree^1†

Korean Journal of Chemical Engineering, September 2012, 29(9), 1279-1284(6), 10.1007/s11814-012-0021-4

Download PDF

Articles & Issues

Vol.29 No.9 September, 2012

1. A study of the palladium size effect on the direct synthesis of hydrogen peroxide from hydrogen and oxygen using highly uniform palladium nanoparticles supported on carbon

2. TiCl4 hybridization with modified Ni(II) α-diimine catalyst complex for ethylene polymerization

3. Estimation of nitrous oxide emissions (GHG) from wastewater treatment plants using closed-loop mass balance and data reconciliation

4. Cost of energy analysis of integrated gasification combined cycle (IGCC) power plant with respect to CO2 capture ratio under climate change scenarios

5. Development of a novel self-validating soft sensor

6. Numerical method for heat transfer and fouling analysis of a shell and tube heat exchanger using statistical analysis

7. CO oxidation over CuO catalysts prepared with different precipitants

8. Estimation of approximate activation energy loss and mass transfer coefficient from a polarization curve of a polymer electrolyte fuel cell

9. Pinch based approach to estimate CO2 capture and storage retrofit and compensatory renewable power for South Korean electricity sector

10. Application of iron-coated zeolites (ICZ) for mine drainage treatment

11. Electrochemical degradation of phenol on the La and Ru doped Ti/SnO2-Sb electrodes

12. Preparation and characterizations of activated carbon from kenaf fiber for equilibrium adsorption studies of copper from wastewater

13. Deterioration of denitrification by oxygen and cost evaluation of electron donor in an uncovered pre-denitrification process

14. Electro-Fenton treatment of synthetic organic dyes: Influence of operational parameters and kinetic study

15. The effects of culture condition on the growth property and docosahexaenoic acid production from Thraustochytrium aureum ATCC 34304

16. Influence of sodium dodecyl sulfate and cetyl trimethylammonium bromide upon calcium carbonate precipitation on bacterial cellulose

17. Evaluation of sediments of the waste from beer fermentation broth for bioethanol production

18. Adsorption of Ni(II) on ion exchange resin: Kinetics, equilibrium and thermodynamic studies

19. Profit maximization of the normal hexane recovery process through a thermal integration method

20. Steam regeneration of acetone and toluene in activated carbon and dealuminated Y-zeolite beds

21. Excess molar enthalpies of ternary and constituent binary systems {1,2-dichloropropane+2-propanol+2-butanol} at T=298.15K

22. Electroless deposition of NiMoP films using alkali-free chemicals for capping layers of copper interconnections

23. Modeling studies on the effects of the process parameters in forced-flow chemical vapor infiltration reactor for the preparation of C/C composites

24. Preparation and characterization of ophthalmic polymers containing silicon nanoparticles

25. Synthesis of molecularly imprinted polymers from AnAc for the separation of γ-oryzanol