ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

TPD STUDY FOR DIRECT SYNTHESIS OF METHYLCHLOROSILANES

Korean Journal of Chemical Engineering, September 1995, 12(4), 454-459(6), 10.1007/BF02705810
downloadDownload PDF

Abstract

Temperature programmed desorption (TPD) was performed to obtain information about the role of silicon, catalyst (copper), and promoters (zinc and tin), and to characterize the active sites for the formation of silanes. Use of infrared spectroscopy allowed rapid analysis of the gas-phase product composition. During TPD where methyl chloride was used as an adsorbate, Methyl chloride(MeCl), hydrogen chloride (HCl), methane (CH4) and silanes were produced from contact masses. Although dimethylchlorosilane (DMDC), methyltrichlorosilane (MTCS), methyltrichlorosilane (MTCS), trimethylchlorosilane (TMCS) and dimethylchorosilane (DMCS) were produced during the direct reaction, tetrachlorosilane (QCS), trichlorosilane (TCS), methyltrichlorosilane (MTCS), and methyldichlorosilane (MDCS) were the major silanes observed during the TPD. Zinc promotion to silicon-copper contact mass (CuSi mass) increased the production of TCS, while tin promotion decreased the production of silanes having H atom, and increased the production of MTCS. Copromotion of 0.5 wt% zinc and 0.2 wt% in increased the MTCS production further; however, the copromotion of zinc (0.5 wt% ) and tin containing a small amount of tin(0.01wt%) produced QCS as a major silane product. The silicon sites having two or three surface species such as CH3, Cl and H were proposed as the active sites responsible for the formation of silanes, and the silicon sites of =SiCl2 and =Si(CH3)Cl were the most abundant under the steady state condition.

References

Agarwala JP, Falconer JL, Int. J. Chem. Kinet., 19, 519 (1987) 
Banholzer WF, Lewis N, Ward W, J. Catal., 101, 405 (1986) 
Fikhtengolts VS, Klebansky AL, J. Gen. Chem. USSR., 27, 2535 (1957)
Frank TC, Falconer JL, Langmuir, 1, 104 (1985) 
Frank TC, Kester KB, Falconer JL, J. Catal., 91, 44 (1985) 
Frank TC, Kester KB, Falconer JL, J. Catal., 95, 396 (1985) 
Gasper-Galvin LD, Sevenich DM, Friedrich HB, Rethwisch DG, J. Catal., 128, 468 (1991) 
Kim JP, Ph.D. Dissertation, University of Iowa (1990)
Kim JP, Rethwisch DG, J. Catal., 134, 168 (1992) 
Pauling L, "The Nature of the Bond," Cornell University, New York (1960)
Rochow EG, J. Am. Chem. Soc., 67, 963 (1945) 
Voorhoeve RJH, "Organohalosilanes. Precursors to Silicones," Elsevier, New York (1967)
Voorhoeve RJH, Vlugter JC, J. Catal., 4, 220 (1965) 
Ward WJ, Carrol KM, Electrochem. Soc. J., 129(1), 227 (1982) 
Ward WJ, Ritzer A, Carroll KM, Flock JW, J. Catal., 100, 240 (1986) 

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로