ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

MODELING OF SiO2 CVD FROM TEOS/OZONE IN A SEPARATE - GAS -INJECTION REACTOR

Korean Journal of Chemical Engineering, January 1998, 15(1), 56-63(8), 10.1007/BF02705306
downloadDownload PDF

Abstract

A mathematical model has been developed to study the chemical vapor deposition of SiO2 from TEOS and ozone in a cold-wall separate-gas-injection reactor related to the commercial Watkins-Johnson 7000. The model employs the kinetic scheme proposed previously by Kim and Gill. Control-volume-based finite difference methods are used to solve for the two-dimensional fluid velocity, temperature, and concentration distributions. The model successfully describes experimental data of film thickness profiles available. We systematically investigate the dependence of deposition rate on operating conditions including O3/TEOS ratio, reactant flow rate, and injector-wafer spacing. The predicted results indicate that a high TEOS flow rate and an O3/TEOS ratio of around 30 are preferable for obtaining high deposition rates and good film quality.

References

Chin BL, VandeVen EP, Solid State Technol., April, 119 (1988)
Danckwerts PV, Chem. Eng. Sci., 2, 1 (1953) 
Dobkin D, with Watkins-Johnson, Private Communication (1993)
Fujino K, Nishimoto Y, Tokumasu N, Maeda K, J. Electrochem. Soc., 137, 2883 (1990) 
Ikeda Y, Numasawa Y, Sakamoto M, J. Electron. Mater., 19, 45 (1990)
Jeon BJ, Oh IH, Lim TH, Jung IH, HWAHAK KONGHAK, 35(3), 374 (1997)
Kim EJ, Gill WN, J. Cryst. Growth, 140, 308 (1994) 
Kim EJ, Gill WN, J. Cryst. Growth, 140, 315 (1994) 
Kim EJ, Gill WN, J. Electrochem. Soc., 141(12), 3462 (1994) 
Li J, McVittie JP, Ferziger JH, Saraswat KC, "Profile Simulation of APCVD Oxide from Ozone TEOS," Techcon'93, 463, Sep. 28-30 (1993)
Murase K, Yabumoto N, Komine Y, J. Electrochem. Soc., 140, 1722 (1993) 
Nguyen S, Dobuzinsky D, Harmon D, Gleason R, Fridman S, J. Electrochem. Soc., 137, 2209 (1990) 
Nishimoto Y, Tokumasu N, Fujino K, Maeda K, "Dielectric Film Deposition by Atmospheric Pressure and Low Temperature," IEEE VMIC Conference, 382, June 12-13 (1989)
Park YB, Kang JK, Rhee SW, HWAHAK KONGHAK, 34(2), 143 (1996)
Patankar SV, "Numerical Heat Transfer and Fluid Flow," Hemisphere Publishing Corp., Washington, D.C. (1980)
Popovich MO, Egorova GV, Filippov Yu V, Russ. I. Phys. Chem., 59, 165 (1985)
Shareef IA, Rubloff GW, Anderle M, Gill WN, Cotte J, Kim DH, J. Vac. Sci. Technol. B, 13(4), 1888 (1995) 

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로