Accidents involving toxic releases, explosions, and fires in chemical process industries take a heavy toll of property, human lives, and environment quality. If one could forecast the accidents likely to occur and the damage they were likely to cause, one could devise appropriate strategies to prevent the accidents and contain the damage that did occur. Using this concept, we have developed a computer-automated tool for accident simulation. In this paper the applicability of the concept and the tool is described on the basis of a case study of a typical petrochemical industry. The study reveals that out of eight credible accident scenarios, four would be ’stand-alone’ events, whereas four others would also cause secondary or higher order accidents (domino effects). Of the accidents in the former category, the one as per scenario 8 is the worst as it would adversely impact (within the set limit of 50 % probability of causing lethality) larger areas than the other three such accidents. Among the second category, scenario 1 would be the most undesirable because it would simultaneously cause heat radiation, shock waves, and missile effects over a larger area.

Risk Assessment Industrial Hazard Industrial Accidents Petrochemical Industry

Contini S, Amendola A, Ziomas I, "Benchmark Exercise on Major Hazard Analysis," Joint Research Centre, ISPRA (1991)
European Community, "Council Direction on the Major Accident Hazardous of Certain Industrial Activities," Report No. 82/50/501 EEC, London (1992)
Greenberg HR, Crammer JJ, "Risk Assessment and Management for Chemical Process Industries," Van Nostrand Reinhold, New York (1991)
Kayes PJ, "World Bank Manual of Industrial Hazard Assessment Techniques," (Technica Ltd., London) (1985)
Khan FI, Abbasi SA, Indian J. Chem. Technol., 3(6), 338 (1996)
Khan FI, Abbasi SA, "Anatomy of Industrial Accidents," Report No. CPCE/R&D 1/94, Pondicherry University, Pondicherry (1994)
Khan FI, Abbasi SA, "MAXCRED-A Software Package for Quantitative Risk Analysis," Report No. CPCE/R&D 5/94, Pondicherry University, Pondicherry, Environmental Software (In press) (1996)
Khan FI, Abbasi SA, Chem. Eng. World, September (1996)
Khan FI, Abbasi SA, "Risk Analysis: An Optimum Scheme for Hazard Identification and Assessment," Proceeding of XIXth National System Conference, Coimbatore (1995)
Kletz TA, "What Went Wrong," Gulf Publication, London (1986)
Lees FP, "Loss Prevention in the Process Industries," Butterworths, London, 1 (1980)
Lees FP, "Loss Prevention in the Process Industries: Failure and Event Data," Butterworths, London, 2 (1980)
Pitersen CM, J. Loss Prevention Process Ind., 3, 136 (1990)
Reliability Directorate, "Failure Frequency of Hardware Components," Report No. 87-2981R.27/NVE, Reliability Directorate (1992)