ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

CATALYTIC CRACKING OF VACUUM GAS OIL ON ALUMINA/ZEOLITES MIXTURES - EFFECTS OF PRECIPITATION pH OF ALUMINA AND ZEOLITE TYPE ON PRODUCT DISTRIBUTION -

Korean Journal of Chemical Engineering, September 1998, 15(5), 533-537(5), 10.1007/BF02707105
downloadDownload PDF

Abstract

Catalytic cracking of vacuum gas oil on aluminas mixed with steam-treated zeolites (SY and SM) was investigated at 500℃ using a micro-activity tester. The catalysts containing SY and alumina prepared at pH 9. 5 showed a higher conversion and more fraction of gasoline and K+D (kerosene+diesel) in products than those containing SM and alumina prepared at pH 7.8. This could be explained by acidic properties and pore structure of catalyst. The distribution of produced benzene, toluene and xylene on the catalyst containing SY or SM was different due to the pore size of zeolites. The difference in hydrogen transfer rate over the catalysts containing SY or SM leads to a different composition of unsaturated and saturated products.

References

Abbot J, Guerzoni FN, Appl. Catal., 85, 173 (1992) 
Biswas J, Maxwell IE, Appl. Catal., 63, 197 (1990) 
Campagna R, Kowalczyk D, Letzsch W, Wilcox J, "Fluid Catalytic Cracking Process Technology," Hyatt Regency, Pittsburgh, Pennsylvania, September 22-25, Section 1, p. 7 (1992)
Corma A, Faraldos M, Martinez A, Mifsud A, J. Catal., 122, 230 (1990) 
Corma A, Miguel PJ, Orchilles AV, Koermer G, J. Catal., 145(1), 181 (1994) 
Corma A, Monton JB, Orchilles AV, Appl. Catal., 6, 59 (1985)
Dimon B, Cartraud P, Magnoux P, Guisnet M, Appl. Catal., 101, 351 (1993) 
Guerzoni FN, Abbot J, J. Catal., 147(2), 393 (1994) 
Guisnet M, Magnoux P, Appl. Catal., 54, 1 (1989) 
Huang Y, White A, Walpole A, Trim DL, Appl. Catal., 56, 177 (1989) 
Lee KH, Ha BH, HWAHAK KONGHAK, 34(3), 363 (1996)
Lee KH, Ha BH, HWAHAK KONGHAK, 34(1), 28 (1996)
Mori N, Nishiyama S, Tsuruya S, Masai M, Appl. Catal., 74, 37 (1991) 
Mostad HB, Riis TU, Ellestad OH, Appl. Catal., 8, 105 (1990)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로