A series of γ-Al₂O₃ supported molybdenum carbides [carbided Mo/γ-Al₂O₃ (MCS), Co-Mo/γ-Al₂O₃ (CMCS), and Ni-Mo/γ-Al₂O₃ (NMCS)] and unsupported molybdenum carbide (MCUS) were prepared by the temperature-programmed carburization of their corresponding molybdenum nitrides with 20% CH₄/H₂. XRD and SEM studies show that unsupported molybdenum carbide catalyst possesses a typical crystalline Mo₂C (FCC structure), while supported molybdenum carbide catalysts possess highly dispersed surface molybdenum carbide species on an alumina oxide support. The results of dibenzothiophene (DBT) hydrodesulfurization over molybdenum carbide catalysts show that the reactivity is strongly dependent on the type of catalyst. Supported molybdenum carbide catalysts possess a higher reactivity than the unsupported molybdenum carbide catalyst. In addition, Co or Ni promoted, supported molybdenum carbide catalyst possesses a higher reactivity than the unpromoted, supported molybdenum carbide catalyst. The reactivity, which is also dependent on the reaction conditions, increases with increasing reaction temperature and pressure and contact time. The CO uptakes of the molybdenum carbide catalysts correlate well with overall activity (total rate) for DBT hydrodesulfurization. The major reaction product is biphenyl, with cyclohexylbenzene next in abundance regardless of the type of catalysts and reaction conditions. It was also found that the molybdenum carbide catalysts exhibit stable initial reactivity due to the stable and weak acidic characteristics of these catalysts.

Carbided Mo/γ-Al₂O₃ Mo₂C Promoter N₂ Adsorption XRD SEM CO Chemisorption Dibenzothiophene Hydrodesulfurization

Abe H, Bell AT, Catal. Lett., 18, 1 (1993) 
Abe H, Cheung TK, Bell AT, Catal. Lett., 21, 11 (1993) 
Absi-Halabi M, Stanislaus A, Trimm DL, Appl. Catal., 72, 193 (1991) 
Cho IH, Kang YC, Park SB, HWAHAK KONGHAK, 35(6), 814 (1997)
Choi JG, Brenner JR, Thompson LT, J. Catal., 154(1), 33 (1995) 
Choi JG, Curl RL, Thompson LT, J. Catal., 146(1), 218 (1994) 
Delporte P, Meunier F, Phamhuu C, Vennegues P, Ledoux MJ, Guille J, Catal. Today, 23(3), 251 (1995) 
Gregg SJ, Sing KSW, "Adsorption, Surface Area and Porosity," Academic Press, 2nd edn., London (1982)
Kim KL, Choi KS, Korean J. Chem. Eng., 5(2), 177 (1988)
Leclercq G, Kamal M, Giraudon JM, Devassine P, Feigenbaum L, Leclercq L, Frennet A, Bastin JM, Lofberg A, Decker S, Dufour M, J. Catal., 158(1), 142 (1996) 
Leclercq G, Provost M, Paster H, Grimbolt J, Hardy AM, Gengembre L, Leclercq L, J. Catal., 117, 384 (1989) 
Ledoux MJ, Pham-Huu C, Guille J, Dunlop H, J. Catal., 134, 383 (1992) 
Lee HS, Koo HS, Shin MJ, Kim KL, HWAHAK KONGHAK, 27(2), 123 (1989)
Lee J, Boudart M, Appl. Catal., 19, 207 (1985) 
Lee J, Boudart M, Catal. Lett., 20, 97 (1993) 
Lee JK, Park HK, Kim MC, Kim KL, HWAHAK KONGHAK, 33(2), 147 (1995)
Lee KS, Abe H, Reimer JA, Bell AT, J. Catal., 139, 34 (1993) 
Lee KW, Choi MJ, Kim SB, Korean J. Chem. Eng., 8(3), 143 (1991)
Markel EJ, Vanzee JW, J. Catal., 126, 646 (1990)
Moon SJ, Ihm SK, Korean J. Chem. Eng., 11(2), 111 (1994)
Nagai M, Kusagawa T, Miyata A, Omi S, Bull. Soc. Chim. Belg, 104, 311 (1995)
Nagai M, Miyao T, Tuboi T, Catal. Lett., 18, 9 (1993) 
Oh M, Jan EJ, HWAHAK KONGHAK, 35(5), 791 (1997)
Oyama ST, Schlatter JC, Metcalfe JE, Lambert JM, Ind. Eng. Chem. Res., 27, 1639 (1988) 
Park HK, "A Study of Hydrodesulfurization of Dibenzothiophene over Mo, CoMo, NiMo/γ-Al2O3 Catalysts with Various States, and their Characterization and Kinetic Analysis," Ph.D. Thesis, Yonsei University, Seoul (1994)
Park HK, Jeon KS, Kim KL, HWAHAK KONGHAK, 28(1), 1 (1990)
Park HK, Lee JK, Kim KL, HWAHAK KONGHAK, 35(2), 276 (1997)
Park HK, Lee JK, Yoo JK, Ko ES, Kim DS, Kim KL, Appl. Catal. A: Gen., 150(1), 21 (1997) 
Peri JB, "Catalysis-Science and Technology," Springer-Verlag, West Germany, Vol. 5 (1984)
Ranhotra GS, Haddix GW, Bell AT, Teimer JA, J. Catal., 108, 24 (1987) 
Roberts KL, Markel EJ, J. Phys. Chem., 98(15), 4083 (1994) 
Schlatter JC, Oyama ST, Metcalfe JE, Lambert JM, Ind. Eng. Chem. Res., 27, 1648 (1988) 
Shin CH, Kim HS, Kim KL, HWAHAK KONGHAK, 27(3), 315 (1989)
Thakur DS, Thomas MG, Ind. Eng. Chem. Prod. Res. Dev., 23, 349 (1984) 
Thakur DS, Thomas MG, J. Solid State Chem., 59, 332 (1985) 
Volpe L, Boudart M, Catal. Rev.-Sci. Eng., 27(4), 515 (1985)
Zaki MI, J. Phys. Chem., 90, 3176 (1986)