Articles & Issues

Language: English

Conflict of Interest: In relation to this article, we declare that there is no conflict of interest.

This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

All issues

Barrier Property by Controlled Laminar Morphology of LLDPE/EVOH Blends

Seong Woo Kim^1† Young Ho Chun^{1 2}

¹Department of Chemical Engineering, Kyonggi University, Suwon, Korea ²Research & Development Center, Kumho Chemicals, Ichon, Korea

Korean Journal of Chemical Engineering, July 1999, 16(4), 511-517(7), 10.1007/BF02698277

Download PDF

Abstract

Using the extrusion blown film process, we obtained linear low density polyethylene (LLDPE)/ethylenevinyl alcohol copolymer (EVOH) blends with an improved barrier property by generating a laminar structure of the dispersed phase in the matrix phase. This laminar morphology induced by drawing and blowing was found to result in a significant decrease in toluene permeability with only 10 wt% EVOH. Effects of compatibilizer content and processing parameters such as blending sequence, screw configuration, and stretch ratio on the toluene permeability and morphology of the blends were investigated. It was revealed that the optimum amount of compatibilizer, maleic anhydride grafted LLDPE, should be used to improve the barrier property of the LLDPE/EVOH blends with a well developed laminar structure. The blending sequence had a significant influence on the permeability of the blends. The blend films exhibited a more pronounced laminar structure when all blend components were simultaneously melt blended in a single screw extruder. In addition, the screw configuration designed to impart a low shear stress and the balanced stretching in the machine and transverse directions were more favorable processing conditions in obtaining high barrier blends.

Keywords

LLDPE/EVOH Blends Barrier Property Laminar Morphology Toluene Permeability

References

Botros MG, J. Plastic Film Sheeting, 12, 195 (1996)
Faisant JB, Ait-Kadi A, Bousmina M, Deschenes L, Polymer, 39(3), 533 (1998)
Favis BD, Chalifoux JP, Polym. Eng. Sci., 27(20), 1591 (1987)
Finch CA, "Polyvinyl Alcohol," John Wiley & Sons, New York (1993)
Finlayson KM, "Plastic Film Technology: High Barrier Plastic Films for Packaging," Technomic Publishing Co., Lancaster, Pa. (1989)
Gonzalez-Nunez R, Favis BD, Carreau PJ, Lavallee C, Polym. Eng. Sci., 33(13), 851 (1993)
Holstimiettinen RM, Perttila KP, Seppala JV, Heino MT, J. Appl. Polym. Sci., 58(9), 1551 (1995)
Hope PS, Bonner JG, Curry JE, Pure Appl. Chem., 68(8), 1665 (1996)
Kamal MR, Garmabi H, Hozhabr S, Arghyris L, Polym. Eng. Sci., 35(1), 41 (1995)
Kamal MR, Jinnah IA, Utracki LA, Polym. Eng. Sci., 24(17), 1337 (1984)
Lee SY, Kim SC, Polym. Eng. Sci., 37(2), 463 (1997)
Lohfink GW, Kamal MR, Polym. Eng. Sci., 33(21), 1404 (1993)
Min K, White JL, Fellers JF, Polym. Eng. Sci., 24(17), 1327 (1984)
Samios CK, Kalfoglou NK, Polymer, 39(16), 3863 (1998)
Subramanian PM, Polym. Eng. Sci., 25(8), 483 (1985)
Subramanian PM, Mehra V, Polym. Eng. Sci., 27(9), 663 (1987)
Wu S, Polym. Eng. Sci., 27(5), 335 (1987)