ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Isotropic Carbon and Graphite Fibers from Chemically Modified Coal-Tar Pitch

1Department of Textile Engineering, Chonnam National University, Kwangju, Korea 2Korea Steel Chemical Co, LTD., Kyonggi, Korea 3Department of Chemical Engineering, Chungnam National University, Taejon, Korea 4, Korea 5Institute of Advanced Material, StudyKyushu University, Fukuoka, Japan
Korean Journal of Chemical Engineering, July 1999, 16(4), 518-524(7), 10.1007/BF02698278
downloadDownload PDF

Abstract

A precursor for a general purpose carbon fiber was prepared from coal tar pitch (CP) modified with 10% p-benzoquinone (BQ) at 380℃ for 3 hours. Such a modification raised the softening of the pitch from 85℃ to 271℃ at a yield of 43%. The modified pitch was spun smoothly at a rate of 480 m/min into a fiber of 20μm diameter. The fiber was stepwise stabilized at 236℃ (5℃/min) and 312℃(1℃/min) for 3 hours at each temperature. Successively, carbonization and graphitization were performed at 1,000℃ and 2,400℃, respectively, for one hour. Both the carbonized and graphitized fibers exhibited tensile strength of 570MPa. The structural parameters of carbon and graphite fibers were their orientation values of 56.2 and 58.1%, relatively low Lc(002) of 11.24 and 25Å, and large interlayer spacing (d002) of 3.86 and 3.49Å, respectively.

References

Brown JK, Lander WR, Fuel, 39, 87 (1963)
Brydson JA, "Flow Properties of Polymer Melts," Butter and Tanner Limited, London, 18 (1981)
Davidson RM, "Nuclear Magnetic Resonance Studies of Coal," IEA Coal Research, London, 40 (1986)
Donnet JB, Bansal RC, "Carbon Fibers," Marcel Dekker, Inc., New York and Basel, 56 (1990)
Komato M, Sakai Y, Korai Y, Ishida S, Watanabe F, Yoon SH, Wang YG, Mochida I, Kato I, Nakamura T, Carbon, 35, 1733 (1997) 
Maeda T, Zeng SM, Tokumitsu K, Mondori J, Mochida I, Carbon, 31, 407 (1993) 
Mochida I, Yatsunami S, Kawabuchi Y, Nakayama Y, Carbon, 33, 1611 (1995) 
Otani S, Okuda K, Matsuda HS, "Carbon Fiber," Kindai Henshu Ltd., Tokyo Japan, 175 (1983)
Otani S, U.S. Patent, 3,629,379 (1971)
Yang KS, Lee DJ, Choi JH, Kumagai H, Sanada Y, "Reaction of Coal Tar Pitch with p-Benzoquinone," in Extended Abstracts of 21st Annual Meeting of the Carbon Society of Japan, Tokyo, 80 (1994)
Zeng SM, Maeda T, Mondori J, Tokumitsu K, Mochida I, Carbon, 31, 421 (1993) 
Zeng SM, Maeda T, Tokumitsu T, Mondori J, Mochida I, Carbon, 31, 413 (1993) 

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로