Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Powder Coating Efficiency of Small Particles and Their Agglomeration in Circulating Fluidized Bed
Department of Applied Chemistry, Kyushu Institute of Technology, Kitakyushu, Japan
Korean Journal of Chemical Engineering, September 1999, 16(5), 630-634(5), 10.1007/BF02708143
Download PDF
Abstract
The coating efficiency of fluidizing small particles and their agglomeration were investigated to evaluate the possibility of powder coating by the use of a circulating fluidized bed. Glass beads, whose mean diameter was 43㎛, and silica powder of 1㎛ were used as a core and a coating material. Ployvinyl alcohol was used as a binder and its solution was supplied together with silica powder from a spray nozzle equipped in the circulating fluidized bed. Glass beads of 43㎛, which had been impossible to coat in a conventional fluidized bed coater, were successfully coated with silica powder in a circulating fluidized bed, and agglomeration among core particles was prevented. From this result, it was confirmed that a circulating fluidized bed performs excellently as a coater, especially for fine core particles, so a circulating fluidized bed coater has bright prospects for particle coating.
References
Abe E, Hirosue H, Kikuchi H, J. Soc. Powder Technol., 36, 278 (1985)
Abe E, Hirosue H, Yamada N, "Coating of Seed Particles in a Tumbling Fluidized Bed by Atomizing the Slurries of Clayey Particles-Coating Efficiency and Growth Rate," Proc. of 3rd World Congress of Chemical Engineering, Tokyo, Japan, 57 (1986)
Kage H, Katayama K, Ishimatsu H, Ogura H, Matsuno Y, "Application of Circulating Fluidized Bed to Powder Coating of Particles," Circulating Fluidized Bed Technology V, Kwauk, M.S. and Li, J.H., eds., Science Press, Beijing (1997)
Kage H, Oba M, Ishimatsu H, Ogura H, Matsuno Y, Adv. Powder Technol., 10(1), 77 (1999)
Kage H, Takahashi T, Yoshida T, Ogura H, Matsuno Y, Powder Technol., 86(3), 243 (1996)
Kage H, Takahashi T, Yoshida T, Ogura H, Matsuno Y, Adv. Powder Technol., 9(3), 245 (1998)
Tsutsumi A, Nakata M, Mineo T, Yoshida K, Kag. Kog. Ronbunshu, 22, 1379 (1996)
Abe E, Hirosue H, Yamada N, "Coating of Seed Particles in a Tumbling Fluidized Bed by Atomizing the Slurries of Clayey Particles-Coating Efficiency and Growth Rate," Proc. of 3rd World Congress of Chemical Engineering, Tokyo, Japan, 57 (1986)
Kage H, Katayama K, Ishimatsu H, Ogura H, Matsuno Y, "Application of Circulating Fluidized Bed to Powder Coating of Particles," Circulating Fluidized Bed Technology V, Kwauk, M.S. and Li, J.H., eds., Science Press, Beijing (1997)
Kage H, Oba M, Ishimatsu H, Ogura H, Matsuno Y, Adv. Powder Technol., 10(1), 77 (1999)
Kage H, Takahashi T, Yoshida T, Ogura H, Matsuno Y, Powder Technol., 86(3), 243 (1996)
Kage H, Takahashi T, Yoshida T, Ogura H, Matsuno Y, Adv. Powder Technol., 9(3), 245 (1998)
Tsutsumi A, Nakata M, Mineo T, Yoshida K, Kag. Kog. Ronbunshu, 22, 1379 (1996)
