ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Hydrodynamics of a Spouted Bed with an Impermeable Draft Tube for Binary Particle Systems

Department of Chemical Engineering, Fukuoka University, Fukuoka, Japan
h-ngsm@fukuoka-u.ac.jp
Korean Journal of Chemical Engineering, September 1999, 16(5), 688-693(6), 10.1007/BF02708153
downloadDownload PDF

Abstract

A spouted bed with an impermeable draft tube was employed to obtain fundamental data of binary mixtures of glass beads for both the operating conditions and the design factors. These data were compared with those for the coarser particle system only. From this view point, minimum spouting velocity, pressure drop, holdup of solid particles within a draft tube, upward gas flow rate witnin the annulus and solids circulation rate were determined by changing the total gas flow rate and mass fraction of finer particles as operating parameters and by changing distance of entrainment zone and draft tube diameter as geometric parameters.

References

Anabtawi MZ, Can. J. Chem. Eng., 76(1), 132 (1998)
Fukumori Y, Ichikawa H, J. Soc. Powder Technol. Jpn., 34, 536 (1997)
Grace JR, Kutluoglu E, Murchie KW, Cavanagh PH, Can. J. Chem. Eng., 61, 308 (1983)
Hatate Y, Mihara H, Ijichi K, Yoshimi T, Arimizu S, Uemura Y, King DF, Kag. Kog. Ronbunshu, 22(5), 1180 (1996)
Hatate Y, Ijichi K, Uemura Y, J. Soc. Powder Technol. Jpn., 34, 343 (1997)
Hattori H, Nagai T, J. Chem. Eng. Jpn., 29(3), 484 (1996) 
Ijichi K, Uemura Y, Hatate Y, Tanaka Y, J. Soc. Powder Technol. Jpn., 33, 706 (1996)
Ijichi K, Uemura Y, Yoshizawa H, Hatate Y, Yoshida K, Kag. Kog. Ronbunshu, 24(3), 365 (1998)
Ishikura T, Shinohara H, Funatsu K, Can. J. Chem. Eng., 60, 697 (1982)
Ishikura T, Nagashima H, Ide M, Kag. Kog. Ronbunshu, 24(2), 346 (1998)
Khoe GK, Brakel JV, Can. J. Chem. Eng., 61, 411 (1983)
Kim SJ, Ha JH, J. Chem. Eng. Jpn., 19, 319 (1986)
Kim SJ, Korean J. Chem. Eng., 7(1), 74 (1990)
Kim SJ, Korean J. Chem. Eng., 2(2), 189 (1985)
Kim SJ, Korean J. Chem. Eng., 1(1), 35 (1984)
Littman H, Morgan MH, Morgan CB, AIChE Symp. Ser., 93, 125 (1997)
Mathur KB, Epstein N, "Spouted Beds," Academic Press, New York, U.S.A. (1974)
Milne BJ, Berruti F, Behie LA, De Bruijn TJW, Can. J. Chem. Eng., 70, 910 (1992)
Song BH, Ahn HS, Lee WJ, Kim SD, "Gas-Solids Behavior in an Internally Circulating Fluidized Bed with an Orifice-Type Draft Tube," Proc. of the 6th Asian Conference on Fluidized-Bed and Three-Phase Reactors, Korea, 103 (1998)
Uemaki O, Yamada R, Kugo M, Can. J. Chem. Eng., 61, 303 (1983)
Yoshida K, Ji H, Tsutsumi A, AIChE Symp. Ser., 93(317), 131 (1997)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로