ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Design and Operating Experience for a Fluidized Bed Incinerator to Treat Industrial Hazardous Scum and Waste Oils

Department of Environmental Engineering and Science, Science, Feng-Chia University, University, Taichung, R.O.C., Taiwan
mhan@wwonline.com
Korean Journal of Chemical Engineering, November 1999, 16(6), 795-797(3), 10.1007/BF02698354
downloadDownload PDF

Abstract

The production of industrial hazardous wastes increases with population growth and industrial progress. Most industrial hazardous wastes are in the forms of sludge, scum or waste oil and have organic properties. The best way to treat those wastes is to burn them in a fluidized bed type incinerator. Because the properties of scum and waste oils are different from those of industrial sludges, the design and operation of such kinds of incinerators are also different from that for industrial sludges. This paper presents the design method and the operating experience for a fluidized bed incinerator to treat specifically industrial hazardous scum and waste oils.

References

Becker KP, Wall CJ, "Fluid Bed Incineration of Wastes," CEP, 61 (1976)
Brunner CR, "Hazardous Air Emission from Incineration," Chapman and Hall Ltd., New York, NY, U.S.A., 89 (1985)
Desai TB, Kamp JF, Hughes T, Kennedy E, McCormick R, Peters J, Zanders D, "Hazardous Waste Incineration Engineering," Noyes Data Co., Park Ridge, NJ, U.S.A., 13 (1981)
Howard JR, "Fluidized Bed Technology: Principles and Application," Adam Hilgar Ltd., New York, NY, U.S.A., 143 (1989)
Ioakimis EG, Davetoy AD, "Management of Oil Sludge from a Refinery Waste Water Treatment Plant," USSR-USA Joint Committee on Cooperation in the Field of Environment Protection, Moscow, USSR, 27 (1975)
Robinson WD, "The Solid Waste Handbook," John Wiley & Sons, New York, NY, U.S.A., 405 (1986)
Trethaway W, "Energy Recovery and Thermal Disposal of Wastes Utilizing Fluidized Bed Reactor Systems," Proceedings of 1976 National Waste Processing Conference, Boston, MA, U.S.A., 117 (1976)
Wentz CA, "Hazardous Waste Management," McGraw-Hill Book Co., New York, NY, U.S.A., 25 (1989)
Zenz FA, Othmer DF, "Fluidization and Fluid-Particle Systems," Reinhold Publishing Co., New York, NY, U.S.A., 25 (1960)
"Incineration Manual of Practice," Water Pollut. Control Fed., Al-exandria, VA., U.S.A., 39 (1988)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로