Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Preparation of Superconducting Y-Ba-Cu-O Films by Aerosol Assisted Chemical Vapor Deposition Using Liquid Solution Sources
School of Chemical Engineering, Chonbuk National University, Chonju 561-756, Korea 1Superconductivity Research Department, Korea Atomic Energy Research Institute, P.O.Box 105, Taejon 305-600, Korea
hsshin@chonbuk.ac.kr
Korean Journal of Chemical Engineering, September 2000, 17(5), 524-527(4), 10.1007/BF02707160
Download PDF
Abstract
Superconducting Y-Ba-Cu-O thin films were prepared on MgO(100) substrate by aerosol-assisted chemical vapor deposition (AACVD). The process used a single solution sourer of Y, Ba and Cu beta-diketonates dissolved in tetrahydrofuran (THF). This liquid precursor was passed through an ultrasonic aerosol generator and transported into a CVD reactor where solvent and precursor evaporation and deposition occurred on heated substrate. Experimental details of this process were described and the effects of preheating temperature were studied in order to improve the quality of the deposited films. When the preheating temperature was 380 degrees C, films deposited at 815 degrees C had sharp transitions to the superconducting state about 88 K. The best superconducting films deposited by AACVD were prepared in oxygen partial pressure of 3.2 Torr at a deposition temperature of 815 degrees C.
Keywords
References
Cho IJ, Shin HS, HWAHAK KONGHAK, 31(1), 9 (1993)
Klippe L, Wahl G, J. Alloy. Compd., 251, 249 (1997)
Salazar KV, Ott KC, Dye RC, Hubbars KM, Peterson EJ, Coulter JY, Kodas TT, Physica C, 198, 303 (1992)
Yoshida Y, Ito Y, Hirabayashi I, Nagai H, Takai Y, Appl. Phys. Lett., 69, 845 (1996)
Klippe L, Wahl G, J. Alloy. Compd., 251, 249 (1997)
Salazar KV, Ott KC, Dye RC, Hubbars KM, Peterson EJ, Coulter JY, Kodas TT, Physica C, 198, 303 (1992)
Yoshida Y, Ito Y, Hirabayashi I, Nagai H, Takai Y, Appl. Phys. Lett., 69, 845 (1996)