Simultaneous removal and recovery of cyanide and cadmium ions using a strong-base anion exchange resin was studied on the basis of formation of Cd-CN complexes at high pH in synthetic wastewater containing cyanide and cadmium ions. Strong-base anion exchange resin particles, of Dowex1X8-50, were contacted with synthetic aqueous solutions. For different molar ratios between cyanide and cadmium, ion exchange characteristics of cadmium-cyanide complexes were studied experimentally in a batch reactor. Treatment efficiencies of packed and fluidized beds were compared under various conditions. Several regenerants, NaSCN, NaCN, and NaOH, were used to regenerate the exhausted resin. The rates of regeneration and recovery for the various regenerants were estimated and discussed. The resin used in this work, Dowex1X8-50, can exchange about 6.6 CN(-) meq./g resin and 3.2 Cd(2+) meq./g resin of cyanide and cadmium ions as complexes, respectively. Free cyanide ion has a lower selectivity than Cd-CN complexes on the anion exchange resin. The degree of treatment efficiency applied in this study was greater in the fluidized bed than packed bed. NaSCN was the best regenerant among regenerants used for regeneration of resin saturated with Cd-CN complexes.

Ion Exchange Simultaneous Removal Cadmium and Cyanide Recovery

Avery NL, Fries W, Ind. Eng. Chem. Prod. Res. Dev., 14, 102 (1975) 
Bhakta D, Shukla SS, Margrave LJ, Environ. Sci. Technol., 26, 625 (1992) 
Cho SH, Jeong WJ, J. KSEE, 1, 1096 (1999)
Goldblatt E, Ind. Eng. Chem., 48, 2107 (1956) 
Goncalves MMM, Pinto AF, Granato M, Environ. Technol., 19, 133 (1998)
Goto M, Goto S, J. Chem. Eng. Jpn., 20, 467 (1987)
Gupta A, "Recovery of Metal-Cyanide Complexes from Electroplating Wastewaters by Ion Exchange," Ph.D. Thesis, The Faculty of Princeton University, U.S.A. (1985)
Hassan SQ, Vitello MP, Kupferle MJ, J. Air Waste Manage. Assoc., 47, 719 (1991)
Herzorg AD, "Cyanide Leach Technology and Its Applicability to Alaskan Conditions," Open File Report 89-90, U.S. Department of the Interior, Bureau of Mines (1990)
Horikawa K, Hirasawa I, Korean J. Chem. Eng., 17(6), 629 (2000)
Horner J, Plat. Surf. Finish., 82, 53 (1995)
Hsu TL, Tran T, Young D, "Modeling of the Chemical Speciation of Cyanide Species-Application to Effluent Treatment," Ausimm Extractive Metal Con., 133 (1991)
Kim JB, Sohn JE, Lee SS, Lee NW, HWAHAK KONGHAK, 24(1), 1 (1986)
Kim SJ, Hwang KR, Cho SY, Moon H, "Simultaneous Removal of Cyanide and Copper Ions in a Semi-Fluidized Ion Exchanger Bed," Proc. of the 6th Asian Conf. on Fluidized-Bed and Three-Phase Reactors, Cheju, Korea, 311 (1998)
Kim SJ, Jeung SY, Moon H, Korean J. Chem. Eng., 15(6), 637 (1998)
Kurama H, Catalsarik T, Desalination, 129(1), 1 (2000) 
Lee HS, Suh JH, Korean J. Chem. Eng., 17(4), 477 (2000)
Lee K, Hong J, AIChE J., 41(12), 2653 (1995) 
Lukey GC, Van Deventer J, Shallcross DC, Hydrometallurgy, 59, 101 (2001) 
Noh BI, Lee CW, Yoon TK, Moon BH, Lee GC, Shin CH, Korean J. Chem. Eng., 16(6), 737 (1999)
Park CK, Hahn PS, Korean J. Chem. Eng., 16(6), 758 (1999)
Ritcey GM, "Tailing Management, Problems and Solutions in the Mining Industry," Elsevier, N.Y., U.S.A (1989)
Short AE, Haselmann SF, Semmens MJ, J. Environ. Sci. Health Part A, 32, 216 (1997)
Yu Q, Kaewsarn P, Korean J. Chem. Eng., 16(6), 753 (1999)
Zhou C, Chin DT, Plat. Surf. Finish., 80, 69 (1993)