ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received February 26, 2002
Accepted June 27, 2002
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Electrochemical Properties of the Oxysulfide LiAl0.18Mn1.82O3.97S0.03 Cathode Materials at Elevated Temperature

Department of Chemical Engineering, Hanyang University, Seoul 133-791, Korea 1School of Chemical Engineering and Technology, Chonbuk National University, Chonju 561-756, Korea
Korean Journal of Chemical Engineering, July 2002, 19(4), 718-721(4), 10.1007/BF02699323
downloadDownload PDF

Abstract

A sulfur-doped spinel material, LiAl0.18Mn1.82O3.97S0.03, was synthesized by a sol-gel method using glycolic acid as chelating agent. The structural change of the oxysulfide spinel before and after cycling at elevated temperature was studied by charge/discharge measurements and X-ray diffraction. The capacity loss during cycling was noticeably increased in the cell operation temperature from 50 to 80 ℃. The capacity loss for the spinel material during cycling at elevated temperature is largely attributed to the formation of tetragonal Li2Mn2O4 and rock salt phase Li2MnO3.

References

Amatucci GG, Blyr A, Sigala C, Alfonse P, Tarascon JM, Solid State Ion., 104(1-2), 13 (1997) 
Amatucci GG, Pereira N, Zheng T, Tarascon JM, J. Electrochem. Soc., 148(2), A171 (2001) 
Amatucci GG, Schmutz CN, Blyr A, Sigala C, Gozdz AS, Larcher D, Tarascon JM, J. Power Sources, 69(1-2), 11 (1997) 
Amine K, Tukamoto H, Yasuda H, Fujita Y, J. Electrochem. Soc., 143(5), 1607 (1996) 
Cho J, Thackeray MM, J. Electrochem. Soc., 146(10), 3577 (1999) 
Cho J, Kim GB, Lim HS, Kim CS, Yoo SI, Electrochemical Solid State Lett., 2, 609 (1999)
Gee B, Horne CR, Cairns EJ, Reimer JA, J. Phys. Chem. B, 102(50), 10142 (1998) 
Myung ST, Komaba S, Kumagai N, J. Electrochem. Soc., 148(5), A482 (2001) 
Park SH, Park KS, Sun YK, Nahm KS, J. Electrochem. Soc., 147(6), 2116 (2000) 
Du Pasquier A, Blyr A, Courjal P, Larcher D, Amatucci G, Gerand B, Tarascon JM, J. Electrochem. Soc., 146(2), 428 (1999) 
Robertson AD, Lu SH, Howard WF, J. Electrochem. Soc., 144(10), 3505 (1997) 
Sun YK, Kim DW, Korean J. Chem. Eng., 16(4), 449 (1999)
Sun YK, Electrochem. Commun., 3, 199 (2001) 
Sun YK, Solid State Ion., 100(1-2), 115 (1997) 
Thackeray MM, Yang S, Kahaian AJ, Kepler KD, Skinner E, Vaughey JT, Hackney SA, Electrochem. Solid-State Lett., 1, 7 (1998) 
Xia YY, Kumada N, Yoshio M, J. Power Sources, 90(2), 135 (2000) 
Xia YY, Zhou YH, Yoshio M, J. Electrochem. Soc., 144(8), 2593 (1997) 

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로