Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
A STUDY ON MIXING MECHANISM IN AIR SPOUTED BEDS
Korean Journal of Chemical Engineering, March 1985, 2(1), 87-92(6), 10.1007/BF02697555
Download PDF
Abstract
The mixing mechanism of solid particles in the air spouted bed was studied by employing an impulse response technique. The particles, german millet and barley, were spouted by air in columns of diameter of 8.4 cm and 12.6 cm.
In the proposed theory, it was assumed that the mixing of the particles in the spouted bed occurs when they circulate through spout, fountain and annulus. Also a theoretical model was derived by assuming that the particle flow in the annulus is a combination of many annular plug flows while the flow in the spout as well as in the fountain is a mixed flow.
The residence time distribution of the particles in the bed was measured by injectiong a portion of colored particles into the feed line and analyzing the concentration of the colored particles in the discharge line. The experimental results and the proposed theory were most satisfactorily agreed when the null residence time in the spout and in the fountain was assumed in the theoretical model.
In the proposed theory, it was assumed that the mixing of the particles in the spouted bed occurs when they circulate through spout, fountain and annulus. Also a theoretical model was derived by assuming that the particle flow in the annulus is a combination of many annular plug flows while the flow in the spout as well as in the fountain is a mixed flow.
The residence time distribution of the particles in the bed was measured by injectiong a portion of colored particles into the feed line and analyzing the concentration of the colored particles in the discharge line. The experimental results and the proposed theory were most satisfactorily agreed when the null residence time in the spout and in the fountain was assumed in the theoretical model.
