ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received November 25, 2002
Accepted January 22, 2003
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Synthesis and Catalytic Application of Ni-Supported Carbon Nanotubes for n-Heptane Cracking

Korean Journal of Chemical Engineering, July 2003, 20(4), 649-652(4), 10.1007/BF02706902
downloadDownload PDF

Abstract

Carbon nanotubes were synthesized by chemical vapor deposition and subsequently purified and oxidized by repeated treatment with nitric acid. After acid treatment the walls of carbon nanotubes became thinner and the surface area increased. The Ni-supported carbon nanotubes prepared by impregnation were applied to the cracking of n-heptane to show an excellent activity. This indicates that the carbon nanotubes can serve as a good catalyst support with high dispersion of metallic components. The optimum Ni loading turned out to be about 5.2 mmol/g. The cracking_x000D_ product was found to contain mainly small hydrocarbons; thus the Ni-supported carbon nanotubes may be applied as a potential catalyst to the cracking of heavy hydrocarbons.

References

Ang LM, Hor TSA, Xu GQ, Tung CH, Zhao SP, Wang JLS, Carbon, 38, 363 (2000) 
Calvert P, Nature, 399(6733), 210 (1999) 
Dillon AC, Jones KM, Bekkedahl TA, Kiang CH, Bethune DS, Heben MJ, Nature, 386(6623), 377 (1997) 
Fan SS, Chapline MG, Franklin NR, Tombler TW, Cassell AM, Dai HJ, Science, 283(5401), 512 (1999) 
Iijima S, Nature, 354, 56 (1991) 
Iijima S, Brabec C, Maiti A, Bernholc JJ, Chem. Phys., 104, 2089 (1996) 
Fazle Kibria AKM, Mo YH, Yun MH, Kim MJ, Nahm KS, Korean J. Chem. Eng., 18(2), 208 (2001)
Kroto HW, Heath JR, OBrien SC, Smalley RE, Nature, 318, 162 (1985) 
Lee SW, Park DK, Lee JK, Ju JB, Sohn TW, Korean J. Chem. Eng., 18(3), 371 (2001)
Tans SJ, Devoret MH, Dai HJ, Thess A, Smalley RE, Geerligs LJ, Dekker C, Nature, 386(6624), 474 (1997) 
Thostenson ET, Ren Z, Chou TW, Compos. Sci. Technol., 61, 1899 (2001) 
Treacy MM, Ebbesen TW, Gibson JM, Nature, 381(6584), 678 (1996) 
Tsang SC, Harris PJF, Green MLH, Nature, 362, 520 (1993) 
Zhang AM, Xie D, Bao S, Xu Q, Acta Chimica Sinica, 58(7), 876 (2000)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로