ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received June 13, 2003
Accepted July 25, 2003
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Synthesis of Nanocrystalline TiO2-Coated Coal Fly Ash for Photocatalyst

Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources, 30 Gajeong, Yuseong, Daejeon 305-350, Korea
Korean Journal of Chemical Engineering, September 2003, 20(5), 850-854(5), 10.1007/BF02697287
downloadDownload PDF

Abstract

In order to more easily separate TiO2 photocatalyst from treated wastewater, TiO2 photocatalyst is immobilized on coal fly ash by precipitation method. The titanium hydroxide precipitated on coal fly ash by neutralization of titanium chloride is transformed into titanium dioxide by heat treatment in the temperature range of 300-700 ℃. The crystalline structure of the titanium dioxide shows anatase type in all ranges of heat treatment temperature. The crystal size of anatase increases with increasing heat treatment temperature, with the drawback being the lower removal ability of NO gas. When the coal fly ash coated with 10 wt% of TiO2 was calcined at 300 and 400 ℃ for 2 hrs, the average crystal size of anatase appeared about 9 nm, and the removal rates of NO gas were 63 and 67.5%, respectively. The major iron oxide, existing in coal fly ash as impurity, is magnetite (Fe3O4). Phase transformation of magnetite into hematite (Fe2O3) by heat treatment improves the removal rate of NO gas for TiO2-coated coal fly ash.

References

Bregani F, Casale C, Depero LE, Sora IN, Robba D, Sangaletti L, Toledo GP, Sens. Actuators B-Chem., 31, 25 (1996) 
Domen K, Hara M, Kondo JN, Takata T, Kudo A, Kobayashi H, Inoue Y, Korean J. Chem. Eng., 18(6), 862 (2001)
Hashimoto K, Wasada K, Osaki M, Shono E, Adachi K, Toukai N, Kominami H, Kera Y, Appl. Catal. B: Environ., 30(3-4), 429 (2001) 
Hoffmann MR, Martin ST, Choi WY, Bahnemann DW, Chem. Rev., 95(1), 69 (1995) 
Hsien YH, Chang CF, Chen YH, Cheng SF, Appl. Catal. B: Environ., 31(4), 241 (2001) 
Jung KY, Park SB, Korean J. Chem. Eng., 18(6), 879 (2001)
Litter MI, Navio JA, J. Photochem. Photobiol. A-Chem., 98, 171 (1996) 
Nam WS, Han GY, Korean J. Chem. Eng., 20(1), 180 (2003)
Park DR, Ahn BJ, Park HS, Yamashita H, Anpo M, Korean J. Chem. Eng., 18(6), 930 (2001)
Ranjit KT, Viswanathan B, J. Photochem. Photobiol. A-Chem., 108, 79 (1997) 
Sampath S, Uchida H, Yoneyama H, J. Catal., 149(1), 189 (1994) 
You YS, Chung KH, Kim YM, Kim JH, Seo G, Korean J. Chem. Eng., 20(1), 58 (2003)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로