ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received March 8, 2004
Accepted September 3, 2004
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Preparation of Anthracene Fine Particles by Rapid Expansion of a Supercritical Solution Process Utilizing Supercritical CO2

Department of Chemical Engineering, Hanyang University, Ansansi, Gyeonggido 425-791, Korea 1Department of Chemical Process Engineering, Toyama University, Gofuku, Toyama, Japan
Korean Journal of Chemical Engineering, November 2004, 21(6), 1245-1249(5), 10.1007/BF02719502
downloadDownload PDF

Abstract

The rapid expansion of a supercritical solution (RESS) process is an attractive technology for the production of small, uniform and solvent-free particles of low vapor pressure solutes. The RESS containing a nonvolatile solute leads to loss of solvent power by the fast expansion of the supercritical solution through an adequate nozzle, which can cause solute precipitation. A dynamic flow apparatus was used to perform RESS studies for the preparation of fine anthracene particles in pure carbon dioxide over a pressure range of 150-250 bar, an extraction temperature range of 50-70 ℃, and a pre-expansion temperature range of 70-300 ℃. To obtain fine particles, 100, 200 and 300 μm nozzles were used to disperse the solution inside of the crystallizer. Both average particle size and particle size distribution (PSD) were dependent on the extraction pressure and the pre-expansion temperature, whereas extractor temperature did not exert any significant effect. Smaller particles were produced with increasing extraction pressure and preexpansion temperature. In addition, the smaller the nozzle diameter, the smaller the particles and the narrower the PSD obtained.

References

Chang CJ, Randolph AD, AIChE J., 35(11), 1876 (1989) 
Domingo C, Berends EM, van Rosmalen GM, J. Cryst. Growth, 166, 989 (1996) 
Domingo C, Berends E, vanRosmalen GM, J. Supercrit. Fluids, 10(1), 39 (1997) 
Domingo C, Wubbolts FE, Rodriguez-Clemente R, vanRosmalen GM, "Rapid Expansion of Supercritical Ternary Systems: Solute+Cosolute+CO2," The 4th International Symposium on Supercritical Fluids, Sendai, Japan, May, 59 (1997)
Johnston KP, Ziger DH, Eckert CA, Ind. Eng. Chem. Fundam., 21, 191 (1982) 
Kim JH, Paxton TE, Tomasko DL, Biotechnol. Prog., 12(5), 650 (1996) 
Matson DW, Petersen RC, Smith RD, J. Am. Chem. Soc., 108, 2100 (1986) 
Matson DW, Fulton JL, Petersen RC, Smith RD, Ind. Eng. Chem. Res., 26, 2298 (1987) 
McHugh MA, Krukonis VJ, "Supercritical Fluid Extraction Principles and Practice," Butterworth-Heinemann, London, 333 (1994)
Mohamed RS, Devenedetti PG, Prud Homme RK, AIChE J., 35(2), 325 (1989) 
Song KH, Lee CH, Lim JS, Lee YW, Korean J. Chem. Eng., 19(1), 139 (2002)
Subramaniam B, Rajewski RA, Snavely K, J. Pharm. Sci., 86(8), 885 (1997) 
Tom JW, Debenedetti PG, Biotechnol. Prog., 7, 403 (1991) 
Turk M, J. Supercrit. Fluids, 15(1), 79 (1999) 
Tsutsumi A, Nakamoto S, Mineo T, Yoshida K, Powder Technol., 85(3), 275 (1995) 

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로