Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received August 13, 2004
Accepted October 26, 2004
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Dynamics of the Wet-end Section in Paper Mills
Department of Chemical Engineering, Hanyang University, Seoul 133-791, Korea
Korean Journal of Chemical Engineering, January 2005, 22(1), 17-25(9), 10.1007/BF02701456
Download PDF
Abstract
A model representing the wet-end section of a paper mill has been developed to characterize its dynamic behavior during the grade change. The model is based on the mass balance relationships written for the simplified wetend white water network. From the linearization of the dynamic model, higher-order Laplace transfer functions were obtained followed by the reduction procedure to give simple lower-order models in the form of 1st-order or 2nd-order plus dead times. The dynamic response of the wet-end is influenced both by the white water volume and by the level of wire retention. Effects of key manipulated variables such as the thick stock flow rate, the ash flow rate and the retention aid flow rate on the major controlled variables were analyzed by numerical simulations. The simple dynamic model developed in the present study can be effectively used in the operation and control.
References
Berrada ME, Tarasiewicz S, Elkadiri ME, Radziszewski PH, IEEE Trans. Ind. Electron., 44(4), 579 (1997)
Hwang C, Chuang YH, Chem. Eng. Sci., 49(19), 3291 (1994)
Elkadiri ME, Berrada ME, "The Wet-end in Pulp and Paper Industry: Controllers and Simulation Results", Record of Annual Pulp and Paper Industry Technical Conf., IEEE, Cincinnati., 97 (1997)
Hauge TA, Lie B, Model. Identif. Control, 23(1), 27 (2002)
Mardon J, Jackson M, Serenius R, Appita J., 25(1), 45 (1971)
Murphy TF, Chen SC, "Transition Control of Paper-making Processes: Paper Grade Change," Proc. IEEE intl. Conf. on control Applications, IEEE, Hawaii, 1278 (1999)
Neimo L, Papermaking Science and Technology: Paper Making Chemistry (Book 4), Ch. 4, Tappi press, Helsinki (2000)
Norman B, "The Water and Fiber Flow System in the Paper and Board Mill," Print Paper and Board Products for Printing in the Nineties Conf. Proc., EUCEPA, Paris, 217 (1990)
Skoglund A, Brundin A, Nord. Pulp Paper Res J, 15(3), 183 (2000)
Vhtamaki P, Pulp Pap. Can., 102(7), 30 (2001)
Yeo YK, Roh HD, Kim IW, Moon I, Chung Y, Korean J. Chem. Eng., 20(2), 200 (2003)
Yeo YK, Yi SC, Ryu JY, Kang H, Korean J. Chem. Eng., 21(2), 358 (2004)
Hwang C, Chuang YH, Chem. Eng. Sci., 49(19), 3291 (1994)
Elkadiri ME, Berrada ME, "The Wet-end in Pulp and Paper Industry: Controllers and Simulation Results", Record of Annual Pulp and Paper Industry Technical Conf., IEEE, Cincinnati., 97 (1997)
Hauge TA, Lie B, Model. Identif. Control, 23(1), 27 (2002)
Mardon J, Jackson M, Serenius R, Appita J., 25(1), 45 (1971)
Murphy TF, Chen SC, "Transition Control of Paper-making Processes: Paper Grade Change," Proc. IEEE intl. Conf. on control Applications, IEEE, Hawaii, 1278 (1999)
Neimo L, Papermaking Science and Technology: Paper Making Chemistry (Book 4), Ch. 4, Tappi press, Helsinki (2000)
Norman B, "The Water and Fiber Flow System in the Paper and Board Mill," Print Paper and Board Products for Printing in the Nineties Conf. Proc., EUCEPA, Paris, 217 (1990)
Skoglund A, Brundin A, Nord. Pulp Paper Res J, 15(3), 183 (2000)
Vhtamaki P, Pulp Pap. Can., 102(7), 30 (2001)
Yeo YK, Roh HD, Kim IW, Moon I, Chung Y, Korean J. Chem. Eng., 20(2), 200 (2003)
Yeo YK, Yi SC, Ryu JY, Kang H, Korean J. Chem. Eng., 21(2), 358 (2004)
