ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received November 3, 2004
Accepted December 24, 2004
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Comparison of Mesoporous Aluminas Synthesized using Stearic Acid and Its Salts

School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, San 56-1, Shillim, Kwanak, Seoul 151-742, Korea
Korean Journal of Chemical Engineering, March 2005, 22(2), 321-327(7), 10.1007/BF02701504
downloadDownload PDF

Abstract

Mesoporous aluminas, X-MAs (X=Na, Mg, and Ni) were prepared using stearic acid and its salts as templates. Sodium stearate, which is more soluble than stearic acid, was an effective template for preparing Na-MA. The characteristics of Mg-MA prepared using cost-effective template (magnesium stearate) were similar to those for an MA prepared using stearic acid. Mg ions were easily exchanged with Ni ion by treatment with an acid or base. Thus, nickel incorporated alumina (Ni-MA) could be directly prepared using nickel stearate, which was acting as a chemical template and a metal source. The MA and X-MAs had a similar pore size (3.6 nm), a narrow pore size distribution (DFWHM~1 nm), and a γ-alumina phase. In addition, bimetallic Ni-MAn catalysts were prepared and applied to the partial oxidation methane as a potential application.

References

Bagshaw SA, Pinnavaia TJ, Angew. Chem.-Int. Edit., 35(10), 1102 (1996) 
Cabrera S, Haskouri JE, Alamo J, Beltran A, Mendioroz S, Marcos MD, Amoros P, Adv. Mater., 11(5), 379 (1999) 
Chokkaram S, Srinivasan R, Milburn DR, Davis BH, J. Mol. Catal. A-Chem., 121(2-3), 157 (1997) 
Corma A, Chem. Rev., 97(6), 2373 (1997) 
Huo Q, Margolese DI, Ciesla U, Feng P, Gier TE, Sieger P, Leon R, Petroff PM, Schuth F, Stucky GD, Nature, 368(24), 317 (1994)
Kim C, Kim Y, Kim P, Yi J, Korean J. Chem. Eng., 20(6), 1142 (2003)
Kim P, Kim Y, Kim C, Kim H, Park Y, Lee JH, Song IK, Yi J, Catal. Lett., 89(3-4), 185 (2003)
Kim P, Kim H, Kim Y, Song IK, Yi J, Appl. Catal. A: Gen., 272(1-2), 157 (2004) 
Kim Y, Lee B, Yi J, Korean J. Chem. Eng., 19(5), 908 (2002)
Kim Y, Kim C, Choi JW, Kim P, Yi J, Stud. Surf. Sci. Catal., 146, 209 (2003)
Kim Y, Kim P, Kim C, Yi J, J. Mater. Chem., 13(9), 2353 (2003) 
Kim Y, Kim C, Choi I, Rengaraj S, Yi J, Environ. Sci. Technol., 38(3), 924 (2004) 
Kim Y, Kim C, Yi J, Mater. Res. Bull., 39(13), 2103 (2004) 
Kim Y, Yi J, J. Ind. Eng. Chem., 10(1), 41 (2004)
Sohlberg K, Pantelides ST, Pennycook SJ, J. Am. Chem. Soc., 123(1), 26 (2001) 
Valange S, Cuth JL, Kolenda F, Lacombe S, Gabelica Z, Microporous Mesoporous Mater., 35-36, 597 (2000) 
Wolverton C, Hass KC, Phys. Rev. B, 63, 024102 (2001) 
Yada M, Hiyoshi H, Ohe K, Machida M, Kijima T, Inorg. Chem., 36(24), 5565 (1997) 

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로