Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received May 13, 2005
Accepted July 6, 2005
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Surface tension and viscosity of 1-butyl-3-methylimidazolium iodide and 1-butyl-3-methylimidazolium tetrafluoroborate, and solubility of lithium bromide+1-butyl-3-methylimidazolium bromide in water
Ki-Sub Kim
Dorjnamjin Demberelnyamba
Bae-Kun Shin
Sun-Hwa Yeon
Sukjeong Choi
Jong-Ho Cha
Huen Lee†
Chul-Soo Lee1
Jae-Jin Shim2
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701, Korea 1Department of Chemical and Biological Engineering, Korea University, 5-1 Anam-dong, Songbuk-gu, Seoul 131-071, Korea 2School of Chemical Engineering and Technology, Yeungnam Univ., 214-1 Tae-dong, Kyongsam City, Gyeongbuk 712-749, Korea
h_lee@kaist.ac.kr
Korean Journal of Chemical Engineering, January 2006, 23(1), 113-116(4), 10.1007/BF02705701
Download PDF
Abstract
The surface tension and viscosity of 1-butyl-3-methylimidazolium iodide ([bmim][I]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) were measured over a temperature range of 298. 15 to 323.15 K. It was found that both the viscosity and surface tension decrease with increasing temperature and that the surface tension and viscosity values of [bmim][I] were higher than those of [bmim][BF4]. Additionally, the solubility of lithium bromide (2)+1-butyl-3-methylimidazolium bromide ([bmim][Br]) (3) in water (1) was measured at three different mass ratios (w2/w3=4 and 7, w3=0) by using a visual polythermal method. The solubility of the suggested systems was better than that of lithium bromide in water.
References
Kim JS, Lee H, J. Chem. Eng. Data, 46(1), 79 (2001)
Kim JS, Park Y, Lee H, J. Chem. Eng. Data, 41(2), 279 (1996)
Kim KS, Lee H, J. Chem. Eng. Data, 47, 216 (2002)
Kim KS, Choi S, Demberelnyamba D, Lee H, Oh J, Lee BB, Mun SJ, Chem. Commun., 828 (2004)
Kim KS, Park SY, Choi S, Lee H, J. Chem. Eng. Data, 49, 1550 (2004)
Kim KS, Shin BK, Lee H, Korean J. Chem. Eng., 21(5), 1010 (2004)
Kim KS, Shin BK, Lee H, Ziegler F, Fluid Phase Equilib., 218(2), 215 (2004)
Marsh KN, Deev A, Wu ACT, Tran E, Klamt A, Korean J. Chem. Eng., 19(3), 357 (2002)
Park Y, Kim JS, Lee H, Yu SI, J. Chem. Eng. Data, 42(1), 145 (1997)
Kim JS, Park Y, Lee H, J. Chem. Eng. Data, 41(2), 279 (1996)
Kim KS, Lee H, J. Chem. Eng. Data, 47, 216 (2002)
Kim KS, Choi S, Demberelnyamba D, Lee H, Oh J, Lee BB, Mun SJ, Chem. Commun., 828 (2004)
Kim KS, Park SY, Choi S, Lee H, J. Chem. Eng. Data, 49, 1550 (2004)
Kim KS, Shin BK, Lee H, Korean J. Chem. Eng., 21(5), 1010 (2004)
Kim KS, Shin BK, Lee H, Ziegler F, Fluid Phase Equilib., 218(2), 215 (2004)
Marsh KN, Deev A, Wu ACT, Tran E, Klamt A, Korean J. Chem. Eng., 19(3), 357 (2002)
Park Y, Kim JS, Lee H, Yu SI, J. Chem. Eng. Data, 42(1), 145 (1997)
