ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received August 12, 2005
Accepted April 7, 2006
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Comparison of YAG: Eu phosphor synthesized by supercritical water and solid-state methods in a batch reactor

Department of Chemical Engineering, Yonsei University, Seoul 120-749, Korea
Korean Journal of Chemical Engineering, September 2006, 23(5), 842-846(5), 10.1007/BF02705938
downloadDownload PDF

Abstract

Phosphor yttrium aluminum garnet (Y3Al5O12, YAG) doped with Eu (10 at%) was synthesized by supercritical water (SCW) and solid-state methods in a batch reactor. The crystals, morphologies and luminescent properties of the phosphors obtained from different pH conditions in the SCW were studied. Pure YAG phase was successfully synthesized at the alkaline condition in the SCW without formation of intermediate phases, while the size and luminescent property of YAG : Eu were strongly affected by pH condition. The luminescent intensity of YAG : Eu by the SCW method without further thermal treatment is stronger than that by the solid-state method with thermal treatment.

References

Gowada G, J. Mater. Sci. Lett., 5, 1029 (1986) 
Hakuta Y, Haganuma T, Sue K, Adschiri T, Arai K, Mater. Res. Bull., 38, 1257 (2003) 
Hay RS, J. Mater. Res., 8, 578 (1993)
In JH, Lee HC, Yoon MJ, Lee KK, Lee CH, J. Supercrit. Fluids, in press (2005)
Jia W, Liu H, Wang Y, Hommerich U, Eilers H, Hoffman KR, Yen WM, J. Lumines., 60-61, 158 (1994) 
Jung KY, Lee DY, Kang YC, Park SB, Korean J. Chem. Eng., 21(5), 1072 (2004)
Kang YC, Lenggoro IW, Park SB, Okuyama K, J. Phys. Chem. Solids, 60, 1855 (1999) 
Kingsley JJ, Patil KC, Mater. Lett., 6, 427 (1988) 
Lee HC, In JH, Hwang KY, Lee CH, Ind. Eng. Chem. Res., 43(13), 3223 (2004) 
Lencka MM, Riman RE, Chem. Mater., 5, 61 (1993) 
Li X, Liu H, Wang J, Cui H, Han F, Mater. Res. Bull., 39, 1923 (2004) 
Lopez OA, McKittrick J, Shea LE, J. Lumines., 71, 1 (1997) 
Nam SC, Kim GJ, Korean J. Chem. Eng., 21(3), 582 (2004)
Nyman M, Caruso J, Hampden-Smith MJ, J. Am. Ceram. Soc., 80, 1231 (1997)
Shea LE, McKittrick J, Lopez OA, Sluzky E, J. Am. Ceram. Soc., 79, 3257 (1996) 
Shikao S, Jiye W, J. Alloy. Compd., 327, 82 (2001) 
Sue K, Hakuta Y, Smith RL, Adschiri T, Arai K, J. Chem. Eng. Data, 44, 1422 (1999) 
Van der Weg WF, Popma JA, Vink AT, J. Appl. Phys., 57, 5450 (1985) 
Van der Weg WF, Robertson JM, Zwicker WK, Popma JA, J. Lumines., 24-25, 633 (1981) 
Vecht A, Gibbons C, Davies D, Jing XP, Marsh P, Ireland T, Silver J, Newport A, Barber D, J. Vac. Sci. Technol. B, 17(2), 750 (1999) 
Yamaguchi O, Takeoka K, Hayashida A, J. Mater. Sci. Lett., 10, 101 (1990) 
Zhou Y, Lin J, Yu M, Wang S, J. Alloy. Compd., 375, 93 (2004) 

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로