ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received March 16, 2007
Accepted March 27, 2007
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Effect of interaction of operation parameters on elutriation behavior in a vortexing fluidized bed

Department of Chemical Engineering, Chung Yuan Christian University, Chung-Li, 320, Taiwan 1Energy & Environment Research Laboratories, Industrial Technology Research Institute (ITRI), Hsinchu, 310, Taiwan
hpwan@itri.org.tw
Korean Journal of Chemical Engineering, November 2007, 24(6), 1106-1112(7), 10.1007/s11814-007-0129-0
downloadDownload PDF

Abstract

A systematic investigation on elutriation behavior conducted in a vortexing fluidized bed (VFB) cold model is studied. The effects of various parameters on the elutriation are investigated from the data obtained by using ‘response surface methodology’ (RSM) to determine the relationship between elutriation rate and operating conditions. The results show that all the interactions among primary air flow rate, secondary air flow rate, fine particle size, secondary air inlet diameter, and imaginary circle diameter had significant influences on elutriation behavior in the VFB. The modified regression models of the ‘specific elutriation rate constant’ (K*) were also submitted in this study.

References

Wan HP, Chyang CS, J. Chem. Eng. Jpn., 31(6), 977 (1998)
Sowards NK, Pollution incineration of solid waste, US Patent No. 4,060,041 (1977)
Korenberg J, Proc. 4th. Int. Conf. on Fluidization, D. Kunii and R. Tori, Eds., Japan, 491-498 (1983)
Nieh S, Yang G, Powder Technol., 50, 121 (1987)
Leva M, Chem. Eng. Prog., 47(1), 39 (1951)
Wen CY, Hasinger RF, AIChE J., 6, 220 (1960)
Wan HP, Chyang CS, Korean J. Chem. Eng., 16(5), 654 (1999)
Agarwala S, King O, Horst S, Wilson R, Stone D, Dagenais M, Chen YJ, J. Vac. Sci. Technol. A, 17(1), 52 (1999)
Wachter R, Cordery A, Carbon, 37, 1529 (1999)
Chung TW, Yeh TS, Yang TCK, J. Non-Cryst. Solids, 279(1-3), 145 (2001)
Kim YK, Jo YS, Hong JP, Lee J, Cryogenics, 41, 39 (2001)
Chen WC, Liu CH, Enzyme Microb. Technol., 18(2), 153 (1996)
Montgomery DC, Design and analysis of experiments, 4th Ed., John Wiley & Sons, New York (1997)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로