ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received February 20, 2007
Accepted September 18, 2007
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

CFD modeling of the effect of absorbent size on absorption performance of a packed bed column

CFD research center, Chemical Engineering Department, Razi University, Kermanshah, Iran
Korean Journal of Chemical Engineering, May 2008, 25(3), 395-401(7), 10.1007/s11814-008-0067-5
downloadDownload PDF

Abstract

This paper reports a study on the ability of the computational fluid dynamics (CFD) modeling for analyzing the fluid flow hydrodynamics and absorption in a packed bed column. The water absorption by silica gel absorbents in an experimental packed bed was investigated, and the absorption performance of two different sizes of absorbent was studied. A series of experiments were carried out for five setups which are different in the weight ratio of the employed big to small absorbents. The CFD modeling was carried out for all five experimental setups. The predicted results show that by more replacing of the big absorbents with the small ones the water absorption increased. On the other hand, a greater pressure drop was observed as more small absorbents were used. The predicted absorption rates were compared with the measured values and on average a consistency within 11.6% was observed.

References

Cho HI, Chung CH, Han GY, Ahn GR, Kong JS, Korean J. Chem. Eng., 17(3), 292 (2000)
Yi CK, Jo SH, Lee BH, Lee SY, Son JE, Jin GT, Korean J. Chem. Eng., 18(6), 1005 (2001)
Lee SB, Cho W, Park DK, Yoon ES, Korean J. Chem. Eng., 23(4), 522 (2006)
Ranade V, Computational flow modeling for chemical reactor engineering, Academic Press, New York (2002)
Tobis J, Ind. Eng. Chem. Res., 41(10), 2552 (2002)
Magnico P, Chem. Eng. Sci., 58(22), 5005 (2003)
Romkes SJP, Dautzenberg E, van den Bleek CM, Calis HPA, Chem. Eng. J., 96(1-3), 3 (2003)
Calis HPA, Nijenhuis J, Paikert BC, Dautzenberg FM, van den Bleek CM, Chem. Eng. Sci., 56(4), 1713 (2001)
Nijemeisland M, Dixon AG, AIChE J., 50(5), 906 (2004)
Nijemeisland M, Dixon AG, Stitt EH, Chem. Eng. Sci., 59(22-23), 5185 (2004)
Guardo A, Coussirat M, Recasens F, Larrayoz MA, Escaler X, Chem. Eng. Sci., 61(13), 4341 (2006)
Logtenberg SA, Nijemeisland M, Dixon AG, Chem. Eng. Sci., 54(13-14), 2433 (1999)
Versteeg HK, Malalasekera W, An introduction to computational fluid dynamics, the finite volume method, Longman Limited, England (1995)
Launder BE, Spalding DB, Mathematical models of turbulence, Academic Press, England (1974)
Yakhot V, Orszag SA, J. Sci. Comput., 1, 1 (1986)
Shih TH, Liou WW, Shabbir A, Zhu J, Comput. Fluids, 24, 227 (1995)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로