ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received April 13, 2007
Accepted September 13, 2007
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Adiabatic runaway studies for methyl ethyl ketone peroxide with inorganic acids by vent sizing package 2

Doctoral Program, Graduate School of Engineering Science and Technology, National Yunlin University of Science and Technology, 123, University Rd., Sec. 3, Douliu, Yunlin, 64002, ROC, Taiwan 1Department of Chemistry, National Chung Hsing University, 250, Kuo-Kwang Rd., Taichung, 40227, ROC, Taiwan 2Department of Environmental Resources Management, Overseas Chinese Institute of Technology, 100, Chiao-Kwang Rd., Taichung, 40721, ROC, Taiwan
Korean Journal of Chemical Engineering, May 2008, 25(3), 419-422(4), 10.1007/s11814-008-0070-x
downloadDownload PDF

Abstract

Methyl ethyl ketone peroxide (MEKPO) is an unstable material that is classified as an explosive substance. We evaluated MEKPO 10 mass% under mixing with three inorganic acids (6 N HNO3, 6 N H3PO4, and 6 N H2SO4) by adiabatic system of vent sizing package 2 (VSP2). Results from evaluation and testing indicated that these three inorganic acids could increase the degree of hazard while combined with pure MEKPO. Therefore, information on the hazards and phenomena of runaway reaction should be provided in order to lessen the degree of hazard.

References

Duh YS, Kao CS, Hwang HH, Lee WL, Trans. Inst. Chem. Eng., 76B, 271 (1998)
Chuang GS, Chao AC, Li HY, Korean J. Chem. Eng., 21(5), 963 (2004)
Kim KS, Ko JW, Korean J. Chem. Eng., 22(1), 26 (2005)
Nam YW, Park KS, Korean J. Chem. Eng., 21(2), 370 (2004)
Arpornwichanop A, Kittisupakorn P, Hussain MA, Korean J. Chem. Eng., 19(2), 221 (2002)
Chung TJ, Kim MC, Choi CK, Korean J. Chem. Eng., 21(1), 41 (2004)
Kim EH, Kwon SW, Lee EH, Yoo JH, Korean J. Chem. Eng., 19(2), 305 (2002)
Leila BD, Fierz HJ, Hazard. Mater., 93, 137 (2002)
Parulekar SJ, Chem. Eng. Sci., 53(13), 2379 (1998)
El-Sayed SA, J. Loss Prev. Process Ind., 16, 249 (2003)
Kumar J, Nath S, Chem. Eng. Sci., 52(20), 3455 (1997)
Kotoyori T, J. Hazard. Mater., A64, 1 (1999)
Chervin S, Bodman GT, Thermochim. Acta, 392-393, 371 (2002)
Wang YW, Shu CM, Duh YS, Kao CS, Ind. Eng. Chem. Res., 40(4), 1125 (2001)
Kossoy AA, Hofelich T, Pro. Saf. Prog., 22, 235 (2003)
Kossoy AA, Akhmetshin Y, Pro. Saf. Prog., DOI: 10.1002/prs.10189 (2007)
Milas NA, Golubovic A, J. Am. Chem. Soc., 82, 5824 (1959)
OSHA, Methyl Ethyl Ketone Peroxide Organic Method # 77, Occupational Safety and Health Administration, USA (1989)
Ingold KU, Chem. Rev., 61, 563 (1961)
Farkaas, Passaqlied, J. Am. Chem. Soc., 72, 3333 (1950)
Knorred G, Maizusz K, Emanueln M, Doklady Akad. Nauk S.S.S.R., 123, 123 (1958)
Tiwari G, Bose P, Ind. Eng. Chem. Res., 45(1), 109 (2006)
Kwon BG, Lee JH, Anal. Chem., 76, 6359 (2004)
Black ED, Hayon E, J. Phys. Chem., 74, 3199 (1970)
Maruthamuthu P, Neta P, J. Phys. Chem., 82, 710 (1978)
Jiang PY, Katsumura Y, Domae M, Ishikawa K, Nagaishi R, Ishigure K, Yoshida Y, J. Chem. Soc.-Faraday Trans., 88, 3319 (1992)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로