ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received July 27, 2007
Accepted September 13, 2007
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Effect of pressure on direct synthesis of DME from syngas over metal-pillared ilerites and metal/metal-pillared ilerites

Department of Chemical Engineering, Myongji University, San 38-2, Namdong, Yongin, Gyeonggi-do 449-728, Korea 1Department of Chemical Engineering, Han-Seo University, 360 Daegokri, Haemi-myun, Seosansi 360-706, Korea
hahm@mju.ac.kr
Korean Journal of Chemical Engineering, May 2008, 25(3), 466-470(5), 10.1007/s11814-008-0079-1
downloadDownload PDF

Abstract

The effect of pressure on the direct synthesis of dimethyl ether (DME) from syngas over metal (Cu, Zn) pillared ilerites and metal (Cu, Zn) impregnated metal-pillared ilerites was explored. The prepared catalysts were characterized by XRD, BET, ICP-AES, SEM and FT-IR. The direct DME synthesis reaction was carried out in a differential fixed bed reactor with the prepared catalysts at various pressures (10, 20, 30 bar), 250 ℃ and H2/CO ratio of 2. The Cu/Zn-pillared ilerite catalyst showed the highest catalytic activity among the prepared catalysts at 20 bar, in which CO conversion was about 62% and DME selectivity was about 89%. CO conversion increased with pressure, and DME selectivity increased with pressure in the range of 10-20 bar, and above the pressure slightly decreased with pressure. The optimum pressure for this reaction was 20 bar.

References

Holderich WF, Roseler J, Heitmann G, Liebens AT, Catal. Today, 37(4), 353 (1997)
Takeguchi T, Yanagisawa K, Inui T, Inoue M, Appl. Catal. A: Gen., 192(2), 201 (2000)
Kim MH, Ko Y, Kim SJ, Uh YS, Appl. Catal. A: Gen., 210(1-2), 345 (2001)
Bartholomew CH, Appl. Catal. A: Gen., 212, 17 (2001)
Joo OS, Jung KD, Han SH, Bull. Korean Chem. Soc., 23, 1103 (2002)
Jia ML, Li WZ, Xu HY, Hou SF, Ge QJ, Appl. Catal. A: Gen., 233(1-2), 7 (2002)
Qi G, Zheng X, Fei J, Hou Z, J. Mol. Catal. A-Chem., 176, 195 (2001)
Liu XM, Lu GQ, Yan ZF, Beltramini J, Ind. Eng. Chem. Res., 42(25), 6518 (2003)
Matsuhashi H, Sato D, Arata K, React. Kinet. Catal. Lett., 81(1), 183 (2004)
Kim JH, Park MJ, Kim SJ, Joo OS, Jung KD, Appl. Catal. A: Gen., 264(1), 37 (2004)
Jiang S, Hwang JS, Jin T, Cai T, Cho W, Baek YS, Park SE, Bull. Korean Chem. Soc., 25, 185 (2004)
Mao DS, Yang WM, Xia JC, Zhang B, Song QY, Chen QL, J. Catal., 230(1), 140 (2005)
Ramos FS, de Farias AMD, Borges LEP, Monteiro JL, Fraga MA, Sousa-Aguiar EF, Appel LG, Catal. Today, 101(1), 39 (2005)
Erena J, Garona R, Arandes JM, Aguayo AT, Bilbao J, Catal. Today, 107-08, 467 (2005)
Fei JH, Hou ZY, Zhu B, Lou H, Zheng XM, Appl. Catal. A: Gen., 304(1), 49 (2006)
Ahn SH, Ph. D. Dissertation, Myongji University (2007)
Lee SB, Cho W, Park DK, Yoon ES, Korean J. Chem. Eng., 23(4), 522 (2006)
Yoo YD, Lee SJ, Yun Y, Korean J. Chem. Eng., 24(2), 350 (2007)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로