ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received September 12, 2007
Accepted February 29, 2008
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

NH3 removal using the dielectric barrier discharge plasma-V-TiO2 photocatalytic hybrid system

Department of Chemical Engineering, School of Environmental Applied Chemistry, KyungHee University, Yongin, Gyeonggi 449-701, Korea 1Department of Chemistry, College of Science, Yeungnam University, Gyeongsan, Gyeongbuk 712-749, Korea
Korean Journal of Chemical Engineering, July 2008, 25(4), 780-786(7), 10.1007/s11814-008-0128-9
downloadDownload PDF

Abstract

This study investigates the photocatalytic performance of V-TiO2 for removal of highly concentrated ammonia (1,000 ppm) in the dielectric barrier discharge (DBD), plasma-photocatalytic, hybrid system. The V (1.0, 5.0, 10.0 mol-%)-TiO2 photocatalysts were prepared by using the conventional sol-gel method. Their surface areas were decreased with increasing vanadium component. The UV-visible absorption band slightly shifted to more visible wavelengths in V-TiO2 compared to that in pure TiO2. The NH3-TPD result confirmed that the ability of NH3 adsorption on the surface of V-TiO2 increased with increasing vanadium content, and was maximized for 5.0-mol% V-TiO2. The NH3 decomposition was enhanced with the photocatalyst compared to the decomposition rate without catalysts, while the decomposition was further increased with the applied plasma voltage. The NH3 decomposition reached 90% after 400 min at an applied plasma voltage of 10.0 kV, and various intermediates, such as -NH2, -NH, and NO, were also identified by using the Fourier transform infrared (FT-IR) spectra. In addition, the NH3 decomposition reached 100% in the plasma-5.0 mol% V-TiO2, photocatalytic, hybrid system after 25 min, compared to 98% in the pure V-TiO2 photocatalytic system after 150 min. In addition, the various undesirable byproducts were depressed when V-TiO2 photocatalyst was used compared to that in the non-catalytic system.

References

Riggan PI, Lockwood RN, Lopez EN, Environ. Sci. Technol., 19, 971 (1985)
Son YH, Jeon MK, Ban JY, Kang M, Choung SJ, J. Ind. Eng. Chem., 11(6), 938 (2005)
Kang M, Appl. Catal. B: Environ., 37(3), 187 (2002)
Lee JH, Nam W, Kang M, Han GY, Yoon KJ, Kim MS, Ogino K, Miyata S, Choung SJ, Appl. Catal. A: Gen., 244(1), 49 (2003)
Park SH, Lee SC, Kang M, Choung SJ, J. Ind. Eng. Chem., 10(6), 972 (2004)
Yeo MK, Kang M, Water Res., 40, 1906 (2006)
Mok YS, Kang HC, Cho MH, Nam IS, Korean J. Chem. Eng., 20(2), 239 (2003)
Jeon SG, Kim KH, Shin DH, Nho NS, Lee KH, Korean J. Chem. Eng., 24(3), 522 (2007)
Ban JY, Son YH, Kang M, Choung SJ, Appl. Surf. Sci., 253(2), 535 (2006)
Wu NL, Lee MS, Pon ZJ, Hsu JZ, J. Photochem. Photobiol. A-Chem., 163, 277 (2004)
Liu Q, Wu X, Wang B, Liu Q, Mater. Res. Bull., 37, 2255 (2002)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로