ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received March 30, 2007
Accepted December 19, 2007
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Poly(o-anisidine) on brass: Synthesis and corrosion behavior

Arts and Science Faculty, Department of Chemistry, The University of Mustafa Kemal, 31040, Turkey 1Arts and Science Faculty, Department of Physic, The University of Middle East Technical, 06531, Turkey
Korean Journal of Chemical Engineering, July 2008, 25(4), 846-853(8), 10.1007/s11814-008-0140-0
downloadDownload PDF

Abstract

The electrochemical synthesis of poly(o-anisidine) (POA) was achieved on brass (CuZn) electrode by applying two scan rates (50 and 20 mVs.1). The synthesized polymer films were strongly adherent and homogeneous in both cases. Their corrosion performance was investigated by AC impedance spectroscopy (EIS) technique, anodic polarization plots and open circuit potential-time curves, in 3.5% NaCl solution. It was clearly seen that poly(o-anisidine) films provided a significant physical protection for longer exposure time. It was shown that polymer film coated at high scan rate (CuZn/POA-H) exhibited better barrier property against the attack of corrosive agents when compared with polymer film obtained at low scan rate (CuZn/POA-L). It was found out that poly(o-anisidine) film synthesized at high scan rate caused a significant increase in corrosion resistance by its catalytic behavior on formation of protective oxide layers on the surface in longer time.

References

Kim SJ, Okido M, Moon KM, Korean J. Chem. Eng., 20(3), 560 (2003)
Kim SJ, Kim JI, Okido M, Korean J. Chem. Eng., 21(4), 915 (2004)
Lee HJ, Kang DW, Lee YJ, Korean J. Chem. Eng., 21(4), 895 (2004)
Assouli B, Chikh ZAA, Idrissi H, Srhiri A, Polymer, 42(6), 2449 (2001)
Ravichandran R, Rajendran N, Appl. Surf. Sci., 241(3-4), 449 (2005)
Al-Kharafi FM, Ateya BG, Abd Allah RM, J. Appl. Electrochem., 34(1), 47 (2004)
Mamas S, Kryak T, Kabasakaloglu M, Koc A, Mater. Chem. Phys., 93, 41 (2005)
Antonijevic MM, Milic SM, Serbula SM, Bogdanovic GD, Electrochim. Acta, 50(18), 3693 (2005)
Kousik G, Pitchumani S, Renganathan NG, Prog. Org. Coat., 43, 286 (2001)
Motheo AJ, Pantoja MF, Venancio EC, Solid State Ion., 171(1-2), 91 (2004)
Mondal SK, Prasad KR, Munichandraiah N, Synth. Met., 148, 275 (2005)
Fenelon AM, Breslin CB, Surf. Coat. Technol., 190, 264 (2005)
Rajendran V, Gopalan A, Vasudevan T, Chen WC, Wen TC, Mater. Chem. Phys., 65, 320 (2000)
Martyak NM, McAndrew P, McCaskie JE, Dijon, Prog. Org. Coat., 45, 23 (2002)
Shinde V, Sainkar SR, Patil PP, J. Appl. Polym. Sci., 96(3), 685 (2005)
Kilmartin PA, Trier L, Wright GA, Synth. Met., 131, 99 (2002)
Eftekhari A, Synth. Met., 145, 211 (2004)
Borole DD, Kapadi UR, Mahulikar PP, Hundiwale DG, Polym-Plast Technol. Eng., 43, 1443 (2004)
Pawar P, Wankhede MG, Patil PP, Sainkar SR, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 347, 365 (2003)
Pourbaix, Atlas of electrochemical equilibria in aqueous solutions, NACE, Houston, Texas (1966)
Ozyilmaz AT, Colak N, Ozyilmaz G, Sangun MK, Prog. Org. Coat., 60, 24 (2007)
Fenelon AM, Breslin CB, Synth. Met., 144, 125 (2004)
Ozyilmaz AT, Tuken T, Erbil M, Yazici B, Prog. Org. Coat., 52, 92 (2004)
Ozyilmaz AT, Prog. Org. Coat., 54, 127 (2005)
Ozyilmaz AT, Colak N, Sangun MK, Erbil M, Yazici B, Prog. Org. Coat., 54, 353 (2005)
Ozyilmaz AT, Kardas G, Erbil M, Yazici B, Appl. Surf. Sci., 242(1-2), 97 (2005)
Ozyilmaz AT, Surf. Coat. Technol., 200, 3918
Patil S, Sainkar SR, Patil PP, Appl. Surf. Sci., 225(1-4), 204 (2004)
Mansfeld F, Corrosion, 35, 301 (1981)
Mansfeld F, J. Appl. Electrochem., 25(3), 187 (1995)
Walter GW, Corrosion, 26, 281 (1986)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로