ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received September 11, 2007
Accepted February 4, 2008
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

The control of diameter of carbon nanotube over Co-loaded Zeolite Y

Department of Chemistry, College of Science, Yeungnam University, Gyeongsan, Gyeongbuk 712-749, Korea
Korean Journal of Chemical Engineering, July 2008, 25(4), 933-938(6), 10.1007/s11814-008-0152-9
downloadDownload PDF

Abstract

This study examined carbon nanotubes (CNTs) with various outer diameters produced by the catalytic decomposition of acetylene over Co-loaded zeolite Y. The CNTs were grown at differed reaction temperatures, reaction times, and acetylene concentrations. In addition, the effect of the amount of Co dispersed over zeolite Y used as a support was determined. The shape and diameter of the synthesized CNT were identified by SEM and TEM analyzers. As a result, CNTs with various outer diameters were synthesized successfully. The average outer diameter of the synthesized CNTs increased with increasing amount of Co dispersed over zeolite Y regardless of the reaction temperature and reaction time. The outer diameter did not change with acetylene concentration, and the acetylene concentration was fixed to 10 cm3/min. Most of the CNT had large surface areas, >400m2/g. The surface area increased with increasing outer diameter of the CNT until the outer diameter reached 60 nm but decreased with further increases in outer diameter.

References

Strobel R, Jorissen L, Schliermann T, Trapp V, Schutz W, Bohmhammel K, Wolf G, Garche J, J. Power Sources, 84(2), 221 (1999)
Poirier E, Chahine R, Bose TK, Int. J. Hydrog. Energy, 26, 831 (2001)
He N, Kuang Y, Dai Q, Miao Y, Zhang A, Wang X, Song K, Lu Z, Yuan C, Mater. Sci. Eng., 8-9, 151 (1999)
Shajahan M, Mo YH, Nahm KS, Korean J. Chem. Eng., 20(3), 566 (2003)
Bacsa RR, Laurent C, Peigney A, Bacsa WS, Vaugien T, Pousset A, Chem. Phys. Lett., 323, 566 (2000)
Wal RLV, Chem. Phys. Lett., 324, 217 (2000)
Lee CJ, Park J, Kim JM, Huh Y, Lee JY, No KS, Chem. Phys. Lett., 327, 277 (2000)
Zhang H, Shin DH, Lee HS, Lee CJ, J. Phys. Chem. C, 111, 12954 (2007)
Fazle Kibria AKM, Mo YH, Yun MH, Kim MJ, Nahm KS, Korean J. Chem. Eng., 18(2), 208 (2001)
Hernadi K, Fonseca A, Nagy JB, Bernaerts D, Fudala A, Lucas AA, Zeolites, 17, 416 (1996)
Choi YC, Kim DW, Lee TJ, Lee CJ, Lee YH, Synth. Met., 117, 81 (2001)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로