Fluid catalytic cracking (FCC) is one of the most important refinery processes for economical efficiency that produces commercial fuels with acceptable concentrations of sulfur. Several activated carbon (AC) based adsorbents were studied to develop a more efficient adsorbent for removal of mercaptanes and sulfides during the FCC C4 refinery process. The adsorbents were prepared by impregnating AC with CuCl and PdCl2. To evaluate the degree of metal halide impregnation into the AC support, each adsorbent was characterized by N2 adsorption, elemental analysis (EA) and XRF. Three types of ACs were used to investigate the effect of the structural properties such as surface area, total pore volume and pore size distribution. From this analysis, an AC micro pore size of 0.7 nm was found to be the most effective support material for FCC C4 removal of sulfur compounds. The experimental adsorption isotherms were compared with Langmuir and Freundlich models and were found to fit the Freundlich model much better than the Langmuir model. The sulfur removal performance of the prepared adsorbents was tested using the breakthrough experiments. The sulfur adsorption capacities of adsorbents decreased in the following order: AC impregnated PdCl2, AC impregnated CuCl and non-impregnated AC (NIAC). The saturated adsorbents were regenerated by toluene treatment and reactivated at 130 ℃ under a vacuum.

Sulfur Removal Desulfurization Adsorption Activated Carbon Adsorbent CuCl Adsorbent PdCl2 Adsorbent Impregnation FCC

Knudsen KG, Cooper BH, Topsoe H, Appl. Catal. A: Gen., 189(2), 205 (1999)
Choi KH, Sano Y, Korai Y, Mochida I, Appl. Catal. B: Environ., 53(4), 275 (2004)
Song CS, Catal. Today, 86(1-4), 211 (2003)
Babich IV, Moulijn JA, Fuel, 82, 607 (2003)
Ma XL, Sun L, Song CS, Catal. Today, 77(1-2), 107 (2002)
Hernandez-Maldonado AJ, Yang RT, Ind. Eng. Chem. Res., 42(1), 123 (2003)
Hernandez-Maldonado AJ, Yang RT, Ind. Eng. Chem. Res., 42(13), 3103 (2003)
Hernandez-Maldonado AJ, Yang RT, AIChE J., 50(4), 791 (2004)
Hernandez-Maldonado AJ, Yang RT, Ind. Eng. Chem. Res., 43(4), 1081 (2004)
Hernandez-Maldonado AJ, Stamatis SD, Yang RT, He AZ, Cannella W, Ind. Eng. Chem. Res., 43(3), 769 (2004)
Haji S, Erkey C, Ind. Eng. Chem. Res., 42(26), 6933 (2003)
Jeevanandam P, Klabunde KJ, Tetzler SH, Microporous Mesoporous Mat., 79, 101 (2005)
Bakr A, Salem SH, Ind. Eng. Chem. Res., 33(2), 336 (1994)
Salem ABSH, Hamid HS, Chem. Eng. Technol., 20(5), 342 (1997)
Ng FTT, Rahman A, Ohasi T, Jiang M, Appl. Catal. B: Environ., 56(1-2), 127 (2005)
Hernandez-Maldonado AJ, Yang RT, AIChE J., 50(4), 791 (2004)
Xue M, Chitrakar R, Sakane K, Hirotsu T, Ooi K, Yoshimura Y, Feng Q, Sumida N, J. Colloid Interface Sci., 285(2), 487 (2005)
Velu S, Ma XL, Song CS, Ind. Eng. Chem. Res., 42(21), 5293 (2003)
Jiang ZX, Liu Y, Sun XP, Tian FP, Sun FX, Liang CH, You WS, Han CR, Li C, Langmuir, 19(3), 731 (2003)
Zhou AN, Ma XL, Song CS, J. Phys. Chem. B, 110(10), 4699 (2006)
Kim JH, Ma XL, Zhou AN, Song CS, Catal. Today, 111(1-2), 74 (2006)
Wang YH, Yang RT, Langmuir, 23(7), 3825 (2007)
Bhandari VM, Ko CH, Park JG, Han SS, Cho SH, Kim JN, Chem. Eng. Sci., 61(8), 2599 (2006)
Yin CY, Aroua MK, Daud WMAW, Colloid. Surf. A-Physicochem. Eng. Asp., 307, 128 (2007)
Xue M, Chitrakar R, Sakane K, Hirotsu T, Ooi K, Yoshimura Y, Feng Q, Sumida N, J. Colloid Interface Sci., 285(2), 487 (2005)
Kopac T, Kocabas S, Chem. Eng. Process., 41(3), 223 (2002)
Bagreev A, Rahman H, Bandosz TJ, Carbon, 39, 13196 (2001)
Tseng HH, Wey MY, Carbon, 42, 2269 (2004)
Lim JL, Okada M, Ultrason. Sonochem., 12, 277 (2005)
Alvarez PM, Beltran FJ, Gomez-Serrano V, Jaramillo J, Rodriguez EM, Water Res., 38, 2155 (2004)
Okoniewska E, Lach J, Kacprzak M, Neczaj E, Desalination, 223(1-3), 256 (2008)
Krishnan KA, Anirudhan TS, J. Hazard. Mater., 92(2), 161 (2002)