ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received August 19, 2009
Accepted October 1, 2009
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

High performance phosphorus-modified ZSM-5 zeolite for butene catalytic cracking

1Lanzhou Petrochemical Research Center, Petrochemical Research Institute, PetroChina, Lanzhou, 730060, China 2State Key Laboratory for Oxo Synthesis and Selective Oxidation, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China 3State Key Laboratory for Oxo Synthesis and Selective Oxidation,Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
gaoxionghou@petrochina.com.cn
Korean Journal of Chemical Engineering, March 2010, 27(3), 812-815(4), 10.1007/s11814-010-0134-6
downloadDownload PDF

Abstract

Phosphorus-modified ZSM-5 zeolites were prepared with a novel method, hydrothermal dispersion. XRD showed that the catalysts prepared by the hydrothermal dispersion had better hydrothermal stability than that by impregnation. At the same time, more pronounced cracking activity and higher yield of ethylene plus propylene were obtained on the phosphorus-modified ZSM-5 catalysts prepared by hydrothermal dispersion. Highest yield of ethylene plus propylene was obtained when the loading of phosphorus was 0.68%. The higher amount of phosphorus fixed on the pores of zeolite, higher hydrothermal stability and appropriate acid amount were the possible reasons for obtaining higher yield of ethylene plus propylene.

References

Lu J, Zhao Z, Xu C, Zhang P, Duan A, Catal. Commun., 7, 199 (2006)
Bortnovsky O, Sazama P, Wichterlova B, Appl. Catal. A: Gen., 287(2), 203 (2005)
Gao X, Tang Z, Ji D, Zhang H, Catal. Commun., 10, 1787 (2009)
Mei CS, Wen PY, Liu ZC, Liu HX, Wang YD, Yang WM, Xie ZK, Hua WM, Gao Z, J. Catal., 258(1), 243 (2008)
Ji D, Wang B, Qian G, Gao Q, Lu G, Yan L, Suo J, Catal. Commun., 6, 297 (2005)
Wang B, Gao Q, Gao JD, Ji D, Wang XL, Suo JS, Appl. Catal. A: Gen., 274(1-2), 167 (2004)
Zhao GL, Teng JW, Zhang YH, Xie ZK, Yue YH, Chen QL, Tang Y, Appl. Catal. A: Gen., 299, 167 (2006)
Zhu XX, Liu SL, Song YQ, Xie SJ, Xu LY, Appl. Catal. A: Gen., 290(1-2), 191 (2005)
Zhu XX, Liu SL, Song YQ, Xu LY, Appl. Catal. A: Gen., 288(1-2), 134 (2005)
Lu JY, Zhao Z, Xu CM, Duan AJ, Zhang P, Catal. Lett., 109(1-2), 65 (2006)
Jiang GY, Zhang L, Zhao Z, Zhou XY, Duan AJ, Xu CM, Gao JS, Appl. Catal. A: Gen., 340(2), 176 (2008)
Wakui K, Satoh K, Sawada G, Shiozawa K, Matano K, Suzuki K, Hayakawa T, Yoshimura Y, Murata K, Mizukami F, Catal. Lett., 84(3-4), 259 (2002)
Zhao GL, Teng JW, Xie ZK, Jin WQ, Yang WM, Chen QL, Tang Y, J. Catal., 248(1), 29 (2007)
Xue NH, Chen XK, Nie L, Guo XF, Ding WP, Chen Y, Gu M, Xie ZK, J. Catal., 248(1), 20 (2007)
Ji D, Zhang H, Zhang Z, Gao X, Wang Y, Liu T, Su Y, Sun S, CN Patent 200810102241.1 (2008)
Li Y, Liu D, Liu S, Wang W, Xie S, Zhu X, Xu L, J. Nat. Gas Chem., 17, 69 (2008)
Blasco T, Corma A, Martinez-Triguero J, J. Catal., 237(2), 267 (2006)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로