ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received December 10, 2009
Accepted February 13, 2010
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

A numerical study of two-phase transonic steam flow through convergence-divergence nozzles with different rates of expansion

Faculty of Mech. Engineering, K.N.Toosi University of Technology, Tehran, Iran
shams@kntu.ac.ir
Korean Journal of Chemical Engineering, November 2010, 27(6), 1646-1653(8), 10.1007/s11814-010-0268-6
downloadDownload PDF

Abstract

During transonic flow of steam in divergence nozzles, flow first supercools and then nucleates to become two-phase droplet flow. This phenomenon especially occurs in the last stages of steam turbines and affects performance. In this research, a numerical scheme for two-phase flow in nozzle passages is developed. An Eulerian-Eulerian reference frame is used for both phases. The shear stress transport turbulence model is used to model the Reynolds stresses appearing_x000D_ in the averaged Navier-Stokes equations. The homogeneous nucleation model is applied for the mass transfer in the transonic conditions. In this paper three nozzles with different rate of expansion are employed to be under study. Overall pressure ratio (static to total pressure) and droplet size are compared with the experimental data and good agreements are observed.

References

Bakhtar F, Zidi K, Proc. Inst. Mech. Eng., 203, 195 (1989)
Bakhtar F, Zidi K, Proc. Inst. Mech. Eng., 204, 233 (1990)
Gerber AG, ASME J. Fluids Eng., 124, 465 (2002)
Gerber AG, Kermani M, Int. J. Heat Mass Transf., 47(10-11), 2217 (2004)
Simpson DA, White AJ, International J. Heat and Fluid Flow, 26, 71 (2005)
Equations of IAPWS-IF97, A summary by Bernhard Spang, Hamburg, Germany, at The Chemical Engineers’ Resource Page.
IAPWS Equations for Transport Properties and, Surface Tension of Water and Steam, A summary by Bernhard Spang, Hamburg, Germany, at The Chemical Engineers’ Resource Page.
McDonald JE, Am. J. Phys., (1962-1963), 30, 870
Kermani MJ, Zayernouri M, Saffar-Avval M, Generalization of an analytical tow-phase steam flow calculator to high-pressure cases, Department of Mechanical Engineering, Amir Kabir University of Technology, Tehran, Iran.
IAPWS Equations for Transport Properties and, Surface Tension of Water and Steam, A summary by Bernhard Spang, Hamburg, Germany, at The Chemical Engineers’ Resource Page.
ANSYS CFX 11-Solver Theory Guide, Discretization and Solution Theory, 227 (2006)
Teymourtash AR, Mahpeykar MR, A Balde to Balde Inviscid Transonic Flow Analysis of Nucleating Steam in a Turbine Cascade by the Jameson’s Time - Marching Scheme Using Body Fitted Grid, Ferdosi University (2006)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로