ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received January 12, 2010
Accepted March 10, 2010
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Removal of NO using surface modified activated carbon fiber (ACF) by impregnation and heat-treatment of propellant waste

Department of Chemical Engineering, Chungnam National University, Daejeon 305-764, Korea
Korean Journal of Chemical Engineering, November 2010, 27(6), 1882-1886(5), 10.1007/s11814-010-0294-4
downloadDownload PDF

Abstract

The surface of activated carbon fiber was modified by impregnation and heat-treatment of propellant waste to introduce nitrogen functional groups such as pyridines, pyridones and pyrrols. The pore structure and specific surface area of those modified ACFs were slightly changed; however, the NO removal capacity of the surface modified ACF by propellant waste increased about twice that of the as-received ACF due to the addition of chemical adsorption by_x000D_ nitrogen functional groups. Propellant waste can be used as an ACF surface modifier for the removal of NOx.

References

Thrower PA, Chemistry and physics of carbon, vol. 25, Marcel Dekker, New York (1996)
Isao M, Yozo K, Masuaki S, Shizuo K, Tomohiro H, Yorimasa S, Carbon, 38, 227 (2000)
Park SJ, Shin JS, Shim JW, Ryu SK, J. Colloid Interface Sci., 275(1), 342 (2004)
Byeon JH, Yoon HS, Yoon KY, Ryu SK, Hwang JH, Surface & Coatings Technol., 202, 3571 (2008)
Lee YS, Kim YH, Hong JS, Suh JK, Cho GJ, Catal. Today, 120(3-4), 420 (2007)
Muniz J, Marban G, Fuertes AB, Appl. Catal. B: Environ., 27(1), 27 (2000)
Shirahama N, Mochida I, Korai Y, Choi KH, Enjoji T, Shimohara T, Yasutake A, Appl. Catal. B: Environ., 52, 1739 (2004)
Raymundo-Pinero E, Cazorla-Amoros D, Linares-Solano A, Carbon, 41, 1925 (2003)
Yu J, Wu Y, Wang S, Ma X, Carbohydrate Polymer, 70, 8 (2007)
Wang MJ, Chang YI, Poncin-Epilla F, Surface and Interface Analysis, 37, 348 (2005)
Folly P, Mder P, CHIMIA International Journal for Chemistry, 58, 374 (2004)
Army Technical Manual TM 9-1300-214 (with Change No. 4), Department of the Army, Headquarters, Washington, D.C. (1990)
Lindblom T, Paulsson LE, 11th Symp. Chem. Probl. Connected Stabil. Explos., Bstard, Sweden (1998)
Borcherding R, Waste Manage., 17, 135 (1997)
Biniak S, Szymaski G, Siedlewski J, Swiatkowski A, Carbon, 35, 1799 (1997)
Kim BK, Ryu SK, Kim BJ, Park SJ, J. Colloid Interface Sci., 302(2), 695 (2006)
Shen W,Wang H, Liu Y, Guo Q, Zhang Y, Colloids and Surface A, 308, 20 (2007)
Moreno-Castilla C, Lopez-Raman MV, Carrasco-Marin F, Carbon, 38, 1995 (2000)
Pels JR, Kapteijn F, Moulijn JA, Zhu Q, Thomas KM, Carbon, 33, 1641 (1995)
Li K, Ling L, Lu C, Qiao W, Liu Z, Liu L, Mochida I, Carbon, 39, 1803 (2001)
Shirahama N, Mochida I, Korai Y, Choi KH, Enjoji T, Shimohara T, Yasutake A, Appl. Catal. B: Environ., 57(4), 237 (2005)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로