Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received March 25, 2010
Accepted May 3, 2010
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Modeling and control of CO2 separation process with hollow fiber membrane modules
Department of Chemical Engineering, Hanyang University, Seoul 133-791, Korea
Korean Journal of Chemical Engineering, January 2011, 28(1), 41-48(8), 10.1007/s11814-010-0317-1
Download PDF
Abstract
A multi-stage model is developed for CO2 separation by hollow-fiber membrane. The model permits rapid solution of the governing differential mass and pressure distribution in hollow-fiber gas separation modules using a computational scheme that does not rely on commercial software and conventional numerical methods such as shooting techniques. For 1-stage, 2-stage and 3-stage configurations the changes of required separation areas according to stage cuts are computed. A simple model predictive control technique is employed to provide optimal operation conditions based on the proposed model. Values of stage cuts can easily be identified for various desired mole fractions and recovery rates. From the results of numerical simulations, we can see that the proposed model can be effectively used in the control of gas separation process by hollow-fiber membrane modules.
Keywords
References
Kim ES, Park DU, Jeong YI, CO2 reduction business, KISTI (2003)
Freni S, Cavallaro S, Donato S, Chiodo V, Vita A, Mater. Lett., 58, 1865 (2004)
Park HB, Jung CH, Lee YM, Hill AJ, Pas SJ, Mudie ST, Wagner EV, Freeman BD, Cookson DJ, Science., 318, 254 (2007)
Zhao L, Riensche E, Menzer R, Blum L, Stolten D, J. Membr. Sci., 325(1), 284 (2008)
Noureddlne B, Amltava S, Kamalesh S, Ind. Eng. Chem. Fundam., 25, 217 (1986)
Thundyil MJ, Koros WJ, J. Membr. Sci., 125(2), 275 (1997)
Choi SH, Kim JH, Kim BS, Lee SB, Membrane J., 15(4), 310 (2005)
Song IH, Ahn HS, Lee YJ, Jeon HS, Lee YT, Kim JH, Lee SB, Membrane J., 16(3), 204 (2006)
Song IH, Ahn HS, Lee YJ, Jeon HS, Lee YT, Kim JH, Lee SB, Membrane J., 16(4), 252 (2006)
Noble RD and Stern SA, Membrane separations technology - principles and applications, Elsevier Science B.V., 519-528 (1995)
Freni S, Cavallaro S, Donato S, Chiodo V, Vita A, Mater. Lett., 58, 1865 (2004)
Park HB, Jung CH, Lee YM, Hill AJ, Pas SJ, Mudie ST, Wagner EV, Freeman BD, Cookson DJ, Science., 318, 254 (2007)
Zhao L, Riensche E, Menzer R, Blum L, Stolten D, J. Membr. Sci., 325(1), 284 (2008)
Noureddlne B, Amltava S, Kamalesh S, Ind. Eng. Chem. Fundam., 25, 217 (1986)
Thundyil MJ, Koros WJ, J. Membr. Sci., 125(2), 275 (1997)
Choi SH, Kim JH, Kim BS, Lee SB, Membrane J., 15(4), 310 (2005)
Song IH, Ahn HS, Lee YJ, Jeon HS, Lee YT, Kim JH, Lee SB, Membrane J., 16(3), 204 (2006)
Song IH, Ahn HS, Lee YJ, Jeon HS, Lee YT, Kim JH, Lee SB, Membrane J., 16(4), 252 (2006)
Noble RD and Stern SA, Membrane separations technology - principles and applications, Elsevier Science B.V., 519-528 (1995)
