ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received August 23, 2023
Accepted August 23, 2023
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Consideration of the methods for evaluating the Cr(VI)-removing capacity of biomaterial

Department of Environmental Engineering, Yensei University, Wonju 220-710, Korea 1Department of Environmental Engineering, Kyungpook National University, Daegu 702-701, Korea 2Advanced Environmental Biotechnology Research Center, Division of Advanced Nuclear Engineering,Department of Chemical Engineering, School of Environmental Science and Engineering, Pohang University of Science and Technology, Pohang 790-784, Korea
daesung@knu.ac.kr
Korean Journal of Chemical Engineering, March 2011, 28(3), 831-836(6), 10.1007/s11814-010-0453-7
downloadDownload PDF

Abstract

Over the last few decades, many researchers have tested various biomaterials for the removal of toxic Cr(VI) from aquatic systems. It is now widely accepted that the mechanism of Cr(VI) biosorption is not ‘anionic adsorption’ but ‘adsorption-coupled reduction’. Unfortunately, however, many researchers have still used common equilibrium isotherm models, such as Langmuir and Freundlich ones, based on ‘anionic adsorption’ mechanism in order to evaluate the Cr(VI)-removing capacity of biomaterial tested. In this study, a fermentation waste of Corynebacterium glutamicum, capable of removing Cr(VI) efficiently, was used as a model biomaterial to show why equilibrium isotherm models cannot be used to evaluate the Cr(VI)-removing capacity of biomaterial. Meanwhile, some alternative methods considering the mechanism of Cr(VI) biosorption were suggested; the maximum Cr(VI)-removing capacity of the biomaterial could be evaluated by a Cr(VI)-biosorption experiment under biomaterial-limited condition as well as by a simplified kinetic model based on the reduction mechanism of Cr(VI).

References

Anderson RA, Regul. Toxicol. Pharmacol., 26, S35 (1997)
Costa M, Klein CB, Crit. Rev. Toxicol., 36, 155 (2006)
Mohan D, Pittman CU, J. Hazard. Mater., 137(2), 762 (2006)
Yoon J, Shim E, Joo H, Korean J. Chem. Eng., 26(5), 1296 (2009)
Choi J, Jung Y, Lee W, Korean J. Chem. Eng., 25(4), 764 (2008)
Park D, Yun YS, Park JM, Biotechnol. Bioproc. Eng., 15, 86 (2010)
Srivastava HCP, Mathur RP, Mehrotra I, Environ. Technol. Lett., 7, 55 (1986)
Deng S, Ting YP, Environ. Sci. Technol., 39, 8490 (2005)
Suksabye P, Thiravetyan P, Nakbanpote W, Chayabutra S, J. Hazard. Mater., 141(3), 637 (2007)
Nityanandi D, Subbhuraam CV, J. Hazard. Mater., 170(2-3), 876 (2009)
Moussavi G, Barikbin B, Chem. Eng. J., 162(3), 893 (2010)
Bankar AV, Kumar AR, Zinjarde SS, J. Hazard. Mater., 170(1), 487 (2009)
Gupta S, Babu BV, Chem. Eng. J., 150(2-3), 352 (2009)
Wang XS, Tang YP, Tao SR, Chem. Eng. J., 148(2-3), 217 (2009)
Baral SS, Das N, Chaudhury GR, Das SN, Hydrilla verticillata, J. Hazard. Mater, 171, 358 (2009)
Bingol A, Aslan A, Cakici A, J. Hazard. Mater., 161(2-3), 747 (2009)
Elangovan R, Philip L, Chandraraj K, Chem. Eng. J., 141(1-3), 99 (2008)
Chand R, Narimura K, Kawakita H, Ohto K, Watari T, Inoue K, J. Hazard. Mater., 163(1), 245 (2009)
Memon JR, Memon SQ, Bhanger MI, El-Turki A, Hallam KR, Allen GC, Colloid. Surf. B., 70, 232 (2009)
Singh KK, Hasan SH, Talat M, Singh VK, Gangwar SK, Chem. Eng. J., 151(1-3), 113 (2009)
Park D, Yun YS, Park JM, Chemosphere., 60, 1356 (2005)
Park D, Lim SR, Yun YS, Park JM, Chemosphere., 70, 298 (2007)
Park D, Yun YS, Park JM, Environ. Sci. Technol., 38, 4860 (2004)
Park D, Yun YS, Park JM, Water Res., 39, 533 (2005)
Park D, Yun YS, Kim JY, Park JM, Chem. Eng. J., 136(2-3), 173 (2008)
Langmuir I, J. Am. Chem. Soc., 40, 1361 (1918)
Freundlich H, Phys. Chem. Soc., 40, 1361 (1906)
Choi SB, Yun YS, Biotechnol. Lett., 26(4), 331 (2004)
Won SW, Choi SB, Chung BW, Park D, Park JM, Yun YS, Ind. Eng. Chem. Res., 43(24), 7865 (2004)
Clesceri LS, Greenberg AE, Eaton AD, Standard methods for the examination of water and wastewater., 20th Ed., American Public Health Association, American Water Work Association, and Water Environment Federation, Washington (1998)
Kumar KV, Porkodi K, J. Hazard. Mater., 138(3), 633 (2006)
Park D, Lim SR, Yun YS, Park JM, Bioresour. Technol., 99, 8810 (2008)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로