ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received October 22, 2010
Accepted December 17, 2010
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Experimental and computational fluid dynamics modeling of mixing by Visco-jet impellers

CFD Research Center, Chemical Engineering Department, Razi University, Kermanshah, Iran 1Faculty of Mechanical Engineering, College of Engineering and Petroleum, Kuwait University, Kuwait
Korean Journal of Chemical Engineering, June 2011, 28(6), 1372-1379(8), 10.1007/s11814-010-0522-y
downloadDownload PDF

Abstract

This paper reports experimental and computational frluid dynamics (CFD) studies on an impeller called Visco-jet with the aim of finding the effect of two side diameters ratio of its blade, which has a semi-conical shape, on drawdown process of floating polymericparticles into high viscosity glycerin solution. Nine different geometries were examined experimentally, and there were significant differences in their performance. The results reveal that when diameter of smaller side of semi-cone impeller is half of the other side, mixing was performed in a more efficient way. The CFD-predicted results have been used for explaining the experimental observation. The CFD-predicted hydrodynamics parameters confirm superiority of this geometry compared with the other ones.

References

Kim SH, Bidkar A, Ngo HH, Vigneswaran S, Moon H, Korean J. Chem. Eng., 18(2), 163 (2001)
Kim SG, Choi KJ, Yu PJ, Kim SH, Lee YD, Korean J. Chem. Eng., 25(1), 19 (2008)
Ozcan-Taskin G, Wei HY, Chem. Eng. Sci., 58(10), 2011 (2003)
Kuzmanic N, Ljubicic B, Chem. Eng. J., 84(3), 325 (2001)
Iranshahi A, Heniche M, Bertrand F, Tanguy PA, Chem. Eng. Sci., 61(8), 2609 (2006)
Iranshahi A, Devals C, Heniche M, Fradette L, Tanguy PA, Takenaka K, Chem. Eng. Sci., 62(14), 3641 (2007)
Perez-Terrazas JE, Ibarra-Junquera V, Rosu HC, Korean J. Chem. Eng., 25(3), 461 (2008)
Sahu AK, Kumar P, Patwardhan AW, Joshi JB, Chem. Eng. Sci., 54(13-14), 2285 (1999)
Um BH, Hanley TR, Korean J. Chem. Eng., 25(5), 1094 (2008)
Pakzad L, Ein-Mozaffari F, Chan P, Chem. Eng. Process., 47(12), 2218 (2008)
Kasat GR, Khopkar AR, Ranade VV, Pandita AB, Chem. Eng. Sci., 63(15), 3877 (2008)
Yamazaki H, Tojo K, Miyanami K, Powder Technol., 48, 205 (1986)
Barailler F, Heniche M, Tanguy PA, Chem. Eng. Sci., 61(9), 2888 (2006)
Ozcan-Taskin G, Chem. Eng. Sci., 61(9), 2871 (2006)
Van der Westhuizen AP, Deglon DA, Mineral. Eng., 20, 233 (2007)
FLUENT 6.2 ®, FLUENT Inc., Lebanon, NH, USA (2005)
Versteeg HK, Malalasekera W, An introduction to computational fluid dynamics: The finite volume method, first Ed., Longman Limited, England (1995)
Anderson TB, Jackson R, Computational fluid dynamics: The basic with applocation, McGraw-Hill. Inc. (1995)
Bird RB, Stewart WE, Lightfoot EN, Transport Phenomena, John Wiley & Sons, Inc. (2002)
Alliet-Gaubert M, Sardeing R, Xuereb C, Hobbes P, Letellier B, Swaels P, Chem. Eng. Process., 45(5), 415 (2006)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로