ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received January 18, 2011
Accepted February 21, 2011
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Effect of CdS contents on H2 production from Pt-(CdS/TiO2) film-typed photocatalysts

Department of Chemical Engineering, University of Seoul, 90 Jeonnong-dong, Dongdaemun-gu, Seoul 130-743, Korea
jhkimad@uos.ac.kr
Korean Journal of Chemical Engineering, August 2011, 28(8), 1684-1687(4), 10.1007/s11814-011-0045-1
downloadDownload PDF

Abstract

Pt-(CdS/TiO2) film-typed photocatalysts are prepared with a doctor-blade method followed by a chemical bath deposition (CBD) process, and the films are characterized by UV-vis spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy. The film-typed structure is composed of photocatalysts and Pt metal part on a FTO substrate without additional electric device, so it is relatively simpler than the conventional photoelectrochemical_x000D_ cell. CdS quantum dots are introduced as a sensitizer for visible light response. Amounts of CdS quantum dots on TiO2 surface are increased with increasing CBD cycles, but they start to aggregate after certain CdS concentration due to oversaturation phenomenon. This high CdS content induces high electron losses, and therefore it reduces amounts of hydrogen production. As a result, there is a saturation point of CdS content at Cd/Ti ratio of 0.197, and the amounts_x000D_ of evolved hydrogen are 5.407 μmol/cm2 ·h at this photocatalyst formulation.

References

Fujishima A, Honda K, Nature., 238, 37 (1972)
Lee S, Yun CY, Hahn MS, Lee J, Yi J, Korean J. Chem. Eng., 25(4), 892 (2008)
Kim IK, Ha HJ, Lee SK, Lee JK, Korean J. Chem. Eng., 22(3), 382 (2005)
Domen K, Hara M, Kondo JN, Takata T, Kudo A, Kobayashi H, Inoue Y, Korean J. Chem. Eng., 18(6), 862 (2001)
Lee SG, Lee HI, Korean J. Chem. Eng., 15(5), 463 (1998)
Luo H, Takata T, Lee Y, Zhao J, Domen K, Yan Y, Chem. Mater., 16, 846 (2004)
Bamwenda G, Tsubota S, Nakamura T, Haruta M, J. Photochem. Photobiol. A: Chem., 89, 177 (1995)
Park H, Choi W, Hoffmann M, J. Mater. Chem., 18, 2379 (2008)
Tada H, Mitsui T, Kiyonaga T, Akita T, Tanaka K, Nature. Mater., 5, 782 (2006)
Liu H, Yuan J, Shangguan WF, Energy Fuels, 20(6), 2289 (2006)
Peng TY, Ke DN, Cai P, Dai K, Ma L, Zan L, J. Power Sources, 180(1), 498 (2008)
Sreethawong T, Junbua C, Chavadeja S, J. Power Sources, 190(2), 513 (2009)
Bang J, Kamat P, ACS Nano., 3, 1467 (2009)
Miwa T, Kaneco S, Katsumata H, Suzuki T, Ohta K, Chand Verma S, Sugihara K, Int. J. Hydrog. Energy., 35, 6554 (2010)
Kitano M, Tsujimaru K, Anpo M, Appl. Catal. A: Gen., 314(2), 179 (2006)
Lin S, Lee Y, Chang C, Shen Y, Yang Y, Appl. Phys. Lett., 90, 143517 (2007)
Strataki N, Antoniadou M, Dracopoulos V, Lianos P, Catal. Today., 151, 53 (2010)
Lee Y, Chi C, Liau S, Chem. Mater., 22, 922 (2009)
Vogel R, Pohl K, Weller H, Chem. Phys. Lett., 174, 241 (1990)
Baker DR, Kamat PV, Adv. Funct. Mater., 19(5), 805 (2009)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로