A reactor has been developed to produce high quality fatty acid methyl esters (FAME) from waste cooking palm oil (WCO). Continuous transesterification of free fatty acids (FFA) from acidified oil with methanol was carried out using a calcium oxide supported on activated carbon (CaO/AC) as a heterogeneous solid-base catalyst. CaO/AC was prepared according to the conventional incipient-wetness impregnation of aqueous solutions of calcium nitrate (Ca(NO3)2·4H2O) precursors on an activated carbon support from palm shell in a fixed bed reactor with an external_x000D_ diameter of 60 mm and a height of 345 mm. Methanol/oil molar ratio, feed flow rate, catalyst bed height and reaction temperature were evaluated to obtain optimum reaction conditions. The results showed that the FFA conversion increased with increases in alcohol/oil molar ratio, catalyst bed height and temperature, whereas decreased with flow rate and initial water content in feedstock increase. The yield of FAME achieved 94% at the reaction temperature 60 ℃, methanol/oil molar ratio of 25 : 1 and residence time of 8 h. The physical and chemical properties of the produced methyl ester were determined and compared with the standard specifications. The characteristics of the product under the optimum condition were within the ASTM standard. High quality waste cooking palm oil methyl ester was produced by combination of heterogeneous alkali transesterification and separation processes in a fixed bed reactor. In sum, activated carbon shows potential for transesterification of FFA.

Biodiesel Waste Cooking Palm Oil Heterogeneous Catalysis Fixed Bed Reactor

Altin R, Cetinkaya S, Yucesu HS, Energy Conv. Manag., 42(5), 529 (2001)
Gopinath A, Puhan S, Nagarajan G, J. Automobile Eng., 223, 565 (2009)
Hsieh LS, Kumar U, Wu JCS, Chem. Eng. J., 158(2), 250 (2010)
Kulkarni MG, Dalai AK, Ind. Eng. Chem. Res., 45(9), 2901 (2006)
Canakci M, Bioresour. Technol., 98(1), 183 (2007)
Zafiropoulos NA, Ngo HL, Foglia TA, Samulski ET, Lin W, Chem. Commun., 35, 3670 (2007)
Veljkovic VB, Lakicevic SH, Stamenkovic OS, Todorovic ZB, Lazic ML, Fuel, 85(17-18), 2671 (2006)
Berchmans HJ, Hirata S, Bioresour. Technol., 99(6), 1716 (2008)
Canakci M, Van J, Gerpen, T. ASAE., 46, 945 (2003)
Liu Y, Wang L, Chem. Eng. Process., 48(6), 1152 (2009)
Costa Neto PR, Rossi L, Zagonel G, Ramos L, Quim. Nova., 23, 531 (2000)
Zaher FA, Megahed OA, El Kinawy OS, Energy Sources, 25(8), 819 (2003)
Baroutian S, Aroua MK, Raman AAA, Sulaiman NMN, Fuel Process. Technol., 91(11), 1378 (2010)
Zabeti M, Daud WMAW, Aroua MK, Appl. Catal. A: Gen., 366(1), 154 (2009)
Xie WL, Huang XM, Catal. Lett., 107(1-2), 53 (2006)
Buasri A, Chaiyut N, Nakweang C, Chiang Mai J. Sci., 38, 572 (2011)
Sridharan R, Mathai IM, J. Sci. Ind. Res. India., 33, 178 (1974)
Feng YH, Zhang AQ, Li JX, He BQ, Bioresour. Technol., 102(3), 3607 (2011)
Wang Y, Ou SY, Liu PZ, Xue F, Tang SZ, J. Mol. Catal. A-Chem., 252(1-2), 107 (2006)
Dhar BR, Kirtania K, Chem. Eng. Res. Bull., 13, 55 (2009)
Lu P, Yuan Z, Li L, Wang Z, Luo W, Renew. Energy., 35, 283 (2010)
Hsieh LS, Kumar U, Wu JCS, Chem. Eng. J., 158(2), 250 (2010)
Wan T, Yu P, Gong S, Li Q, Luo Y, Korean J. Chem. Eng., 25(5), 998 (2008)
Benjapornkulaphong S, Ngamcharussrivichai C, Bunyakiat K, Chem. Eng. J., 145(3), 468 (2009)
Wang ZM, Lee JS, Park JY, Wu CZ, Yuan ZH, Korean J. Chem. Eng., 25(4), 670 (2008)
Russbueldt BME, Hoelderich WF, Appl. Catal. A: Gen., 362(1-2), 47 (2009)
Baroutian S, Aroua MK, Raman AAA, Sulaiman NMN, Bioresour. Technol., 102(2), 1095 (2011)
Fan MM, Zhang PB, Energy Fuels, 21(2), 633 (2007)
Zabeti M, Daud WMAW, Aroua MK, Fuel Process. Technol., 91(2), 243 (2010)
Boz N, Degirmenbasi N, Kalyon DM, Appl. Catal. B: Environ., 89(3-4), 590 (2009)
Vyas AP, Subrahmanyam N, Patel PA, Fuel, 88(4), 625 (2009)
Sun H, Ding YQ, Duan JZ, Zhang QJ, Wang ZY, Lou H, Zheng XM, Bioresour. Technol., 101(3), 953 (2010)
Buasri A, Chaiyut N, Ketlekha P, Mongkolwatee W, Boonrawd S, CMU J. Nat. Sci., 8, 115 (2009)
Park JY, Lee JS, Wang ZM, Kim DK, Korean J. Chem. Eng., 27(6), 1791 (2010)