ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2025 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received March 22, 2011
Accepted August 13, 2011
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Adsorption characteristics of methylene blue on poplar leaf in batch mode: Equilibrium, kinetics and thermodynamics

School of Chemical Engineering and Energy, Zhengzhou University, Kexue Road 100#, Zhengzhou, Henan 450001, P. R. China
xlhan@zzu.edu.cn
Korean Journal of Chemical Engineering, April 2012, 29(4), 494-502(9), 10.1007/s11814-011-0211-5
downloadDownload PDF

Abstract

Adsorption characteristics of methylene blue (MB) from aqueous solution on natural poplar leaf were investigated. Batch experiments were carried out to study the effects of initial pH, contact time, adsorbent dosage, and initial MB concentration, salt concentration (Ca2+ and Na+) as well as temperature on MB adsorption. The optimum condition for adsorption was found at pH 6-9 and adsorbent dosage of 2 g L^(-1). The equilibration time was 240 min. The salt concentration had a negative effect on MB removal. The equilibrium data were analyzed with Langmuir, Freundlich and Koble-Corrigan isotherm models using nonlinear regression method. The adsorption process was more effectively described by Langmuir isotherm based on the values of the correlation coefficient R2 and chi-square statistic x2. The maximum monolayer adsorption capacity of poplar leaf from the Langmuir model was 135.35 mg g^(-1) at 293 K. The pseudo second order equation provided a better fit to experimental data in the kinetic studies. Intraparticle diffusion was involved_x000D_ in adsorption process, but it was not the only rate-controlling step. Thermodynamic quantities such as ΔG, ΔH and ΔS were calculated, indicating that the adsorption process was spontaneous and endothermic. Dye-adsorbent interactions were examined by FTIR and SEM analysis. The FTIR results suggested that there were hydroxyl and carboxyl groups on the surface of poplar leaf, which would make MB adsorption possible. The SEM images showed effective adsorption of MB molecules on the adsorbent surface.

References

Robinson T, Chandran B, Nigam P, Water Res., 36, 2824 (2002)
Gercel O, Gercel HF, Koparal AS, Ogutveren UB, J. Hazard. Mater., 160(2-3), 668 (2008)
Robinson T, Chandran B, Nigam P, Bioresour. Technol., 85(2), 119 (2002)
Kumar KV, Porkodi K, J. Hazard. Mater., 146(1-2), 214 (2007)
Gulnaz O, Kaya A, Dincer S, J. Hazard. Mater., B134, 190 (2006)
Khattri SD, Singh MK, J. Hazard. Mater., 167(1-3), 1089 (2009)
Ofomaja AE, Ho YS, Dyes Pigm., 74, 60 (2007)
Ponnusami V, Krithika V, Madhuram R, Srivastava SN, J. Hazard. Mater., 142(1-2), 397 (2007)
Chuah TG, Jumasiah A, Azni I, Katayon S, Choong SYT, Desalination, 175(3), 305 (2005)
Ho YS, Chiang TH, Hsueh YM, Process Biochem., 40, 119 (2005)
Kumar KV, Dyes Pigm., 74, 595 (2007)
Weng CH, Lin YT, Tzeng TW, J. Hazard. Mater., 170(1), 417 (2009)
Dundar M, Nuhoglu C, Nuhoglu Y, J. Hazard. Mater., 151(1), 86 (2008)
Salim R, Al-Subu M, Abu-Shqair I, Braik H, Inst. Chem. Eng., 81B, 236 (2003)
Bayramoglu G, Arica MY, J. Hazard. Mater., 143(1-2), 135 (2007)
Akar T, Tosun I, Kaynak Z, Ozkara E, Yeni O, Sahin EN, Akar ST, J. Hazard. Mater., 166(2-3), 1217 (2009)
Waranusantigul P, Pokethitiyook P, Kruatrachue M, Upatham ES, Environ. Pollut., 125, 385 (2003)
Vadivelan V, Kumar KV, J. Colloid Interface Sci., 286(1), 90 (2005)
Wang SB, Zhu ZH, Coomes A, Haghseresht F, Lu GQ, J. Colloid Interface Sci., 284(2), 440 (2005)
Lorenc-Grabowska E, Gryglewicz G, Dyes Pigm., 74, 34 (2007)
Han RP, Zou WH, Yu WH, Cheng SJ, Wang YF, Shi J, J. Hazard. Mater., 141(1), 156 (2007)
Han RP, Wang Y, Han P, Shi J, Yang J, Lu YS, J. Hazard. Mater., B137, 550 (2006)
Bulut Y, Aydin H, Desalination, 194(1-3), 259 (2006)
Kumar KV, Kumaran A, Biochem. Eng. J., 27, 83 (2005)
Wang Y, Mu Y, Zhao QB, Yu HQ, Sep. Purif. Technol., 50(1), 1 (2006)
Song JY, Zou WH, Bian YY, Su FY, Han RP, Desalination, 265(1-3), 119 (2011)
Royer B, Cardoso NF, Lima EC, Vaghetti JCP, Simon NM, Calvete T, Veses RC, J. Hazard. Mater., 164(2-3), 1213 (2009)
Han XL, Wang W, Ma XJ, Chem. Eng. J., 171(1), 1 (2011)
Aksu Z, Process Biochem., 38, 89 (2002)
Annadurai G, Juang RS, Lee DJ, J. Hazard. Mater., B92, 263 (2002)
Aksu Z, Karabayir G, Bioresour. Technol., 99, 7730 (2008)
Fu QL, Deng YL, Li HS, Liu J, Hu HQ, Chen SW, Sa TM, Appl. Surf. Sci., 255(8), 4551 (2009)
Ugurlu M, Micropor. Mesopor. Mater., 119, 276 (2009)
Akar T, Ozcan AS, Tunali S, Ozcan A, Bioresour. Technol., 99(8), 3057 (2008)
Dogan M, Alkan M, Turkyilmaz A, Ozdemir Y, J. Hazard. Mater., B109, 141 (2004)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로