Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received August 1, 2011
Accepted August 25, 2011
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Design and optimization of a dividing wall column by factorial design
School of Chemical Engineering, Yeungnam University, Gyeongsan 712-749, Korea
Korean Journal of Chemical Engineering, May 2012, 29(5), 567-573(7), 10.1007/s11814-011-0223-1
Download PDF
Abstract
A factorial design methodology was applied to the design of a dividing wall column, solving the complex multivariable problems and simultaneously optimizing the interacting variables to achieve the best design with respect to total annual cost. Column structure was practically optimized with a minimum of simulation runs. The proposed design method was tested in the design and optimization of an NGL recovery system; it allowed interactions between variables to be identified and quantified. The column system designed by the proposed method reduced reboiler energy consumption and total annual cost by 28.23% and 25.49%, respectively, in case 1, and those by 25.63% and 18.85%, respectively, over conventional distillation in case 2.
References
Annakou O, Mizsey P, Ind. Eng. Chem. Res., 35(6), 1877 (1996)
Jimenez A, Ramirez N, Castro A, Hernandez S, Trans.IChemE., 81, 518 (2003)
Halvorsen IJ, Skogestad S, Ind. Eng. Chem. Res., 42(3), 605 (2003)
Halvorsen IJ, Skogestad S, Ind. Eng. Chem. Res., 43(14), 3994 (2004)
Kim YH, Nakaiwa M, Hwang KS, Korean J. Chem. Eng., 19(3), 383 (2002)
Kim YH, Hwang KS, Nakaiwa M, Korean J. Chem. Eng., 21(6), 1098 (2004)
Poth N, Brusis D, Stichlmair J, Chem. Ing. Technol., 76, 1811 (2004)
Amminudin KA, Smith R, Thong DYC, Towler GP, Trans.IChemE., 79, 701 (2001)
Long NVD, Lee S, Lee M, Chem. Eng. Process., 49(8), 825 (2010)
Lee SH, Shamsuzzoha M, Han M, Kim YH, Lee M, Korean J. Chem. Eng., 28(2), 348 (2011)
Long NVD, Lee MY, Asia Pac. J. Chem. Eng., 6, 338 (2011)
Premkumar R, Rangaiah GP, Chem. Eng. Res. Des., 87(1A), 47 (2009)
Dejanovic I, Matijasevic L, Jansen H, Olujic Z, Ind. Eng. Chem. Res., 50(9), 5680 (2011)
Kolbe B, Wenzel S, Chem. Eng. Process., 43, 339 (2004)
Vazquez-Castillo JA, Venegas-Sanchez JA, Segovia-Hernandez JG, Hernandez-Escoto H, Hernandez S, Gutierrez-Antonio C, Briones-Ramirez A, Comput. Chem. Eng., 33(11), 1841 (2009)
Dejanovic I, Matijasevic L, Olujic Z, Chem. Eng. Process., 49(6), 559 (2010)
Yeomans H, Grossmann IE, Ind. Eng. Chem. Res., 39(11), 4326 (2000)
Caballero JA, Grossmann IE, Ind. Eng. Chem. Res., 40(10), 2260 (2001)
Dunnebier G, Pantelides CC, Ind. Eng. Chem. Res., 38(1), 162 (1999)
Long NVD, Lee MY, Dividing wall column structure design using response surface methodology, Comput. Chem. Eng., In press (2012)
Montgomery DC, Design and analysis of experiments, 3rd Ed.,New York, John Wiley & Sons (1991)
Carvalho CML, Cabral JMS, Aires-Barros MR, Enzyme Microb. Technol., 24(8-9), 569 (1999)
Cestari AR, Airoldi C, Bruns RE, Colloids Surfaces A., 117, 7 (1996)
Cestari AR, Vieira EFS, Mota JA, J. Hazard. Mater., 160(2-3), 337 (2008)
Persson K, Astrom O, J. Chromatogr. B: Biomed. Sci. Appl., 697, 207 (1997)
Amminudin KA, Smith R, Trans. IChemE., 79, 716 (2001)
Klemola KT, Ilme JK, Ind. Eng. Chem. Res., 35(12), 4579 (1996)
Aspen Technology, Aspen HYSYS Thermodynamics COM Interface, Version Number V7.1 (2009)
Manley, Deethanizer/Depropanizer Sequences with Thermal and Thermo Mechanical Coupling and Component Distribution, US Patent, 5,673,571 (1997)
Nejad SJ, Abolghasemi H, Moosavian MA, Maragheh MG, Chem. Eng. Res. Des., 89(6A), 827 (2011)
Sinnott RK, Chemical Engineering Design (4th Ed.), Coulson & Richardson’s Chemical Engineering Series Vol. 6, Elsevier Butterworth Heinemann, Oxford (2005)
Biegler LT, Grossmann IE, Westerberg AW, Systematic Methods of Chemical Process Design, Prentice Hall Inc., New Jersey (1997)
Krajnc M, Glavic P, Comput. Chem. Eng., 20(S), 183 (1996)
Smith R, Chemical Process Design, McGraw Hill, New York (1995)
Jimenez A, Ramirez N, Castro A, Hernandez S, Trans.IChemE., 81, 518 (2003)
Halvorsen IJ, Skogestad S, Ind. Eng. Chem. Res., 42(3), 605 (2003)
Halvorsen IJ, Skogestad S, Ind. Eng. Chem. Res., 43(14), 3994 (2004)
Kim YH, Nakaiwa M, Hwang KS, Korean J. Chem. Eng., 19(3), 383 (2002)
Kim YH, Hwang KS, Nakaiwa M, Korean J. Chem. Eng., 21(6), 1098 (2004)
Poth N, Brusis D, Stichlmair J, Chem. Ing. Technol., 76, 1811 (2004)
Amminudin KA, Smith R, Thong DYC, Towler GP, Trans.IChemE., 79, 701 (2001)
Long NVD, Lee S, Lee M, Chem. Eng. Process., 49(8), 825 (2010)
Lee SH, Shamsuzzoha M, Han M, Kim YH, Lee M, Korean J. Chem. Eng., 28(2), 348 (2011)
Long NVD, Lee MY, Asia Pac. J. Chem. Eng., 6, 338 (2011)
Premkumar R, Rangaiah GP, Chem. Eng. Res. Des., 87(1A), 47 (2009)
Dejanovic I, Matijasevic L, Jansen H, Olujic Z, Ind. Eng. Chem. Res., 50(9), 5680 (2011)
Kolbe B, Wenzel S, Chem. Eng. Process., 43, 339 (2004)
Vazquez-Castillo JA, Venegas-Sanchez JA, Segovia-Hernandez JG, Hernandez-Escoto H, Hernandez S, Gutierrez-Antonio C, Briones-Ramirez A, Comput. Chem. Eng., 33(11), 1841 (2009)
Dejanovic I, Matijasevic L, Olujic Z, Chem. Eng. Process., 49(6), 559 (2010)
Yeomans H, Grossmann IE, Ind. Eng. Chem. Res., 39(11), 4326 (2000)
Caballero JA, Grossmann IE, Ind. Eng. Chem. Res., 40(10), 2260 (2001)
Dunnebier G, Pantelides CC, Ind. Eng. Chem. Res., 38(1), 162 (1999)
Long NVD, Lee MY, Dividing wall column structure design using response surface methodology, Comput. Chem. Eng., In press (2012)
Montgomery DC, Design and analysis of experiments, 3rd Ed.,New York, John Wiley & Sons (1991)
Carvalho CML, Cabral JMS, Aires-Barros MR, Enzyme Microb. Technol., 24(8-9), 569 (1999)
Cestari AR, Airoldi C, Bruns RE, Colloids Surfaces A., 117, 7 (1996)
Cestari AR, Vieira EFS, Mota JA, J. Hazard. Mater., 160(2-3), 337 (2008)
Persson K, Astrom O, J. Chromatogr. B: Biomed. Sci. Appl., 697, 207 (1997)
Amminudin KA, Smith R, Trans. IChemE., 79, 716 (2001)
Klemola KT, Ilme JK, Ind. Eng. Chem. Res., 35(12), 4579 (1996)
Aspen Technology, Aspen HYSYS Thermodynamics COM Interface, Version Number V7.1 (2009)
Manley, Deethanizer/Depropanizer Sequences with Thermal and Thermo Mechanical Coupling and Component Distribution, US Patent, 5,673,571 (1997)
Nejad SJ, Abolghasemi H, Moosavian MA, Maragheh MG, Chem. Eng. Res. Des., 89(6A), 827 (2011)
Sinnott RK, Chemical Engineering Design (4th Ed.), Coulson & Richardson’s Chemical Engineering Series Vol. 6, Elsevier Butterworth Heinemann, Oxford (2005)
Biegler LT, Grossmann IE, Westerberg AW, Systematic Methods of Chemical Process Design, Prentice Hall Inc., New Jersey (1997)
Krajnc M, Glavic P, Comput. Chem. Eng., 20(S), 183 (1996)
Smith R, Chemical Process Design, McGraw Hill, New York (1995)
