ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received September 23, 2013
Accepted November 20, 2013
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

The structure of organotin oxides playing a key role on the transesterification of dimethyl carbonate with hydrogenated bisphenol A

School of Materials Science and Engineering, The State Key Laboratory of Hollow Fiber Membrane Materials and Processes, Tianjin Polytechnic University, Tianjin 300160, China 1School of Environment Science and Chemical Engineering, Tianjin Polytechnic University, Tianjin 300160, China
Korean Journal of Chemical Engineering, March 2014, 31(3), 427-430(4), 10.1007/s11814-013-0247-9
downloadDownload PDF

Abstract

Transesterification of dimethyl carbonate (DMC) with hydrogenated bisphenol A (HBPA) was studied over various organotin oxides under pressured condition without removal of by-producing methanol. Bu2SnO displayed higher activities in HBPA conversion and bis-methylcarbonate of hydrogenated bisphenol-A (BMHBPA) synthesis, and HBPA conversion and BMHBPA selectivity reached 97.4% and 84.0%. However, when Ph2SnO was used as catalyst, HBPA conversion and BMHBPA selectivity decreased to 81.5 and 37.7%. Catalyst steric hindrance significantly influenced HBPA conversion and BMHBPA formation, and π-d interaction between phenyl ring and Sn was unfavorable for the transesterification of HBPA with DMC. Moreover, the catalytic system was further optimized.

References

Yen CH, Lin HW, Tan CS, Catal. Today, 174(1), 121 (2011)
Vandenberg LN, Chahoud I, Heindel JJ, Padmanabhan V, Paumgartten FJR, Schoenfelder G, Environ. Health Perspect., 118, 1055 (2010)
Yu T, Ren J, Gu S, Yang M, Polym. Int., 58, 1058 (2009)
Pego AP, Grijpma DW, Feijen J, Polymer, 44(21), 6495 (2003)
Lu L, Huang K, Polym. Int., 54, 870 (2005)
Jiang ZZ, Liu C, Gross RA, Macromolecules, 41(13), 4671 (2008)
Yamamoto Y, Kaihara S, Toshima K, Macromol. Biosci., 9, 968 (2009)
Pokharkar V, Sivaram S, Polymer, 36(25), 4851 (1995)
Foy E, Farrell JB, Higginbotham CL, J. Appl. Polym. Sci., 111(1), 217 (2009)
Feng YX, Yin N, Li QF, Wang JW, Kang MQ, Wang XK, Catal. Lett., 121(1-2), 97 (2008)
Jiang ZZ, Liu C, Xie WC, Gross RA, Macromolecules, 40(22), 7934 (2007)
Shaikh AG, Sivaram S, Puglisi C, Samperi F, Montaudo G, Polym. Bull., 32(4), 427 (1994)
Park JH, Jeon JY, Lee JJ, Jang Y, Varghese JK, Lee BY, Macromolecules, 46(9), 3301 (2013)
He XL, Li ZH, Su KM, Cheng BW, Ming J, Catal. Commun., 33, 20 (2013)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로