Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received December 31, 2014
Accepted April 13, 2015
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Effect of flow rate variation on the frequency response in slot coating process with different upstream sloped die geometries
Department of Chemical and Biological Engineering, Korea University, Seoul 136-713, Korea 1Samsung Advanced Institute of Technology, Gyeonggy 443-803, Korea 2School of Chemical Engineering, Sungkyunkwan University, Gyeonggy 440-746, Korea
hwjung@grtrkr.korea.ac.kr
Korean Journal of Chemical Engineering, July 2015, 32(7), 1218-1221(4), 10.1007/s11814-015-0079-x
Download PDF
Abstract
The sensitivity of slot coating process with different sloped upstream die configurations has been investigated using the viscocapillary model for a coating liquid with constant viscosity (Newtonian) through frequency response technique. Amplitude ratios of coating thickness with respect to a sinusoidal disturbance at flow rate are compared under different input frequency and upstream die lip angle conditions. Amplitude ratio values decrease as the upstream die lip angle increases, implying that the coating system is less sensitive to the given disturbance due to the larger space condition in the upstream die region. Amplitude ratio curves obtained from various conditions can be usefully unified in a single one with the help of new dimensionless time between fluid time scale in upstream region and perturbed time scale by input frequency.
References
Cohen ED, Gutoff EB, Modern coating and drying technology, Wiley-VCH, New York (1992).
Kistler SF, Schweizer PM, Liquid film coating, Chapman & Hall, London (1997).
Koh HJ, Kwon I, Jung HW, Hyun JC, Korea-Aust. Rheol. J., 24(2), 137 (2012)
Lee SH, Kim SJ, Nam J, Jung HW, Hyun JC, J. Coat. Technol., 11, 47 (2014)
Gates ID, Slot coating flows: Feasibility, quality, PhD Thesis, University of Minnesota (1999).
Lee SH, Koh HJ, Ryu BK, Kim SJ, Jung HW, Hyun JC, Chem. Eng. Sci., 66, 4953 (2011)
Higgins BG, Scriven LE, Chem. Eng. Sci., 35, 673 (1980)
Lin CF, Wong DSH, Liu TJ, Wu PY, Adv. Polym. Technol., 29(1), 31 (2010)
Han GH, Lee SH, Ahn WG, Nam J, Jung HW, J. Coat. Technol. Res., 11, 29 (2014)
O’brien WG, US Patent, 4,445,458 (1984).
Carvalho MS, Kheshgi HS, AIChE J., 46(10), 1907 (2000)
Bhamidipati KL, Didari S, Bedell P, Harris TAL, J. Non-Newton. Fluid Mech., 166(12-13), 723 (2011)
Didari S, Ahmad ZY, Veldhorst JD, Harris TAL, J. Coat. Technol., 11, 95 (2014)
Boogar RS, Gheshlaghi R, Mahdavi MA, Korean J. Chem. Eng., 30(1), 45 (2013)
Romero OJ, Carvalho MS, Chem. Eng. Sci., 63(8), 2161 (2008)
Tsuda T, de Santos JM, Scriven LE, AIChE J., 56(9), 2268 (2010)
Perez EB, Carvalho MS, J. Eng. Math., 71, 97 (2011)
Yeckel A, Derby JJ, J. Cryst. Growth, 263(1-4), 40 (2004)
Kistler SF, Schweizer PM, Liquid film coating, Chapman & Hall, London (1997).
Koh HJ, Kwon I, Jung HW, Hyun JC, Korea-Aust. Rheol. J., 24(2), 137 (2012)
Lee SH, Kim SJ, Nam J, Jung HW, Hyun JC, J. Coat. Technol., 11, 47 (2014)
Gates ID, Slot coating flows: Feasibility, quality, PhD Thesis, University of Minnesota (1999).
Lee SH, Koh HJ, Ryu BK, Kim SJ, Jung HW, Hyun JC, Chem. Eng. Sci., 66, 4953 (2011)
Higgins BG, Scriven LE, Chem. Eng. Sci., 35, 673 (1980)
Lin CF, Wong DSH, Liu TJ, Wu PY, Adv. Polym. Technol., 29(1), 31 (2010)
Han GH, Lee SH, Ahn WG, Nam J, Jung HW, J. Coat. Technol. Res., 11, 29 (2014)
O’brien WG, US Patent, 4,445,458 (1984).
Carvalho MS, Kheshgi HS, AIChE J., 46(10), 1907 (2000)
Bhamidipati KL, Didari S, Bedell P, Harris TAL, J. Non-Newton. Fluid Mech., 166(12-13), 723 (2011)
Didari S, Ahmad ZY, Veldhorst JD, Harris TAL, J. Coat. Technol., 11, 95 (2014)
Boogar RS, Gheshlaghi R, Mahdavi MA, Korean J. Chem. Eng., 30(1), 45 (2013)
Romero OJ, Carvalho MS, Chem. Eng. Sci., 63(8), 2161 (2008)
Tsuda T, de Santos JM, Scriven LE, AIChE J., 56(9), 2268 (2010)
Perez EB, Carvalho MS, J. Eng. Math., 71, 97 (2011)
Yeckel A, Derby JJ, J. Cryst. Growth, 263(1-4), 40 (2004)
