Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received February 5, 2016
Accepted June 28, 2016
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Recent development in thermoplastic/wood composites and nanocomposites: A review
Department of Chemical Engineering, Chungbuk National University, 1 Chungdaero, Seowongu, Cheongju, Chungbuk 28644, Korea
dskim@cbnu.ac.kr
Korean Journal of Chemical Engineering, November 2016, 33(11), 3035-3049(15), 10.1007/s11814-016-0183-6
Download PDF
Abstract
Thermoplastic composites filled with wood-base fillers have gained increasing attention, because compared to virgin polymers they have many advantages of light weight, high strength and stiffness, low cost, biodegradability and renewability. These advantages let them find a large dispersal in many areas of technical applications. However, poor interfacial interaction between hydrophilic wood-base fillers and hydrophobic polymer matrices should be improved to get reasonable physical properties for their wide applications. The interfacial interaction could be improved by addition of coupling agents and chemical modifications of wood-base fillers. To improve physical properties of the thermoplastic/wood composites, further nanofillers can be incorporated. This review summarizes recent developments in thermoplastic/wood composites and deals with wood-base fillers for thermoplastics, various interface modification methods and various thermoplastic/wood composites as well as nanocomposites. This review can provide reasonable future perspectives in this research area and stimulate development of new innovative thermoplastic/wood composites as well as nanocomposites.
References
Clemons C, Forest Prod. J., 52, 10 (2002)
Ford M, Proc. Fifth Int. Conf. on Wood fiber-Plast. Compos., Forest Prod. Soc., Madison, WI, 199 (May 1999).
Ashori A, Bioresour. Technol., 99(11), 4661 (2008)
Turku I, Karki T, J. Thermplast Comp. Mater., 27, 180 (2014)
Ismail H, Salmah A, Nasir M, Polym. Test, 20, 819 (2001)
Oksman K, Clemons C, J. Appl. Polym. Sci., 67(9), 1503 (1998)
Bledzki AK, Reihmane S, Gassan J, Polym. Plast. Technol. Eng., 37, 451 (1998)
Stain MM, Kokta BV, Imbert C, Polym. Plast. Technol. Eng., 33, 89 (1994)
Felix JM, Gatenholm PJ, J. Appl. Polym. Sci., 50, 699 (1993)
Gauthier R, Joly C, Coupas A, Gauthier H, Escoubes M, Polym. Compos., 19, 287 (1998)
Park B, Kim DS, Polym. Korea, 35(2), 124 (2011)
Jang SY, Kim DS, Polym. Korea, 39(1), 130 (2015)
Seo YW, Kim DS, Polym. Korea, 38(3), 327 (2014)
Wang Y, Yeh FC, Lai SM, Chan HC, Shen HF, Polym. Eng. Sci., 43(4), 933 (2003)
Lai SM, Yeh FC, Wang Y, Chan HC, Shen HF, J. Appl. Polym. Sci., 87(3), 487 (2003)
Lu JZ, Wu QL, Negulescu II, J. Appl. Polym. Sci., 96(1), 93 (2005)
Gonzalez L, Rodriguez A, Debenito JL, Marcosfernandez A, J. Appl. Polym. Sci., 63(10), 1353 (1997)
Culler SR, Ishida H, Koenig JL, Polym. Compos., 7, 231 (1986)
Ricardo BS, Peter WH, Hasan J, Hou-min C, Bioresour. Technol., 8, 1456 (2013)
Kalia S, Kaushik VK, Sharma RK, J. Nat. Fibers, 8, 27 (2011)
Prasad N, Agarwal VK, Sinha S, Korean J. Chem. Eng., 32(12), 2534 (2015)
Valadez-Gonzalez A, Cervantes-Uc JM, Olayo R, Herrera-Franco PJ, Compos. Pt. B-Eng., 30, 321 (1999)
Poletto M, Zattera AJ, Forte MMC, Santana RMC, Bioresour. Technol., 109, 148 (2012)
Hetzer M, De Kee D, Chem. Eng. Res. Des., 86(10A), 1083 (2008)
Lundin T, Effect of Accelerated Weathering on the Physical and Mechanical Properties of Natural-Fiber Thermoplastic Composites, M. S. Thesis, University of Wisconsin-Madison (2001).
Osswald TA, Menges G, Materials Science of Polymers for Engineers, Hanser Publishers, New York (1995).
DeFosse M, Modern Plast., 80, 25 (2003)
Saheb DN, Jog JP, Adv. Polym. Technol., 18(4), 351 (1999)
Adler E, Wood Sci. Technol., 11, 169 (1977)
Eichhorn S, Baillie C, J. Mater., 6, 2107 (2001)
Kim EG, Kim BS, Kim DS, J. Appl. Polym. Sci., 103(2), 928 (2007)
Matuana LM, Polym. Compos., 19, 446 (1998)
Agrawal R, Saxena NS, Sharma KB, Thomas S, Sreekala MS, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 277, 77 (2000)
Weyenberg I, Ivens J, Coster A, Kino B, Baetens E, Verpoest I, Compos. Sci. Technol., 63, 1241 (2003)
Yim H, Kim DS, Polym. Adv. Technol., 23, 1441 (2012)
Paul A, Joseph K, Thomas S, Compos. Sci. Technol., 57, 67 (1997)
Joseph K, Thomas S, Pavithran C, Polymer, 37(23), 5139 (1996)
Sreekala MS, Kumaran MG, Joseph S, Jacob M, Thomas S, Appl. Compos. Mater., 7, 295 (2000)
Sreekala MS, Kumaran MG, Thomas S, Compos. Pt. A-Appl. Sci. Manuf., 33, 763 (2002)
Harnnarongchai W, Kaschta J, Schubert DW, Sombatsompop N, Polym. Compos., 33, 2084 (2012)
Rong MZ, Zhang MQ, Liu Y, Yang GC, Zeng HM, Compos. Sci. Technol., 61, 1437 (2001)
Yakubu A, Gabriel AO, Cheku M, Paul AM, Int. J. Carbohydrat. Chem., ID 141034 (2013)
Peydecastaing J, Girardeau S, Vaca-Garcia C, Borredon M, Cellulose, 13, 95 (2006)
Freire CSR, Silvestre AJD, Neto CP, Belgacem MN, Gandini A, J. Appl. Polym. Sci., 100(2), 1093 (2006)
Dong X, Dong Y, Jiang M, Wang L, Tong J, Zhou J, Ind. Crop. Prod., 46, 301 (2013)
Shang W, Huang J, Luo H, Chang PR, Feng J, Xie G, Cellulose, 20, 179 (2013)
Dankovchi TA, Hsieh YL, Cellulose, 14, 469 (2007)
Jang SY, Kim DS, J. Appl. Polym. Sci., 144, 42929 (2016)
Zafeiropoulos NE, Compos. Pt. A-Appl. Sci. Manuf., 33, 1083 (2002)
Gregorova A, Wimmer R, Hrabalova M, Koller M, Ters T, Mundigler N, Holzforschung, 63, 565 (2009)
Bledzki AK, Sperber VE, Proc. Fifth Int. Conf. on Wood fiber-Plast. Compos., Forest Prod. Soc., Madison, Wis., 187 (May 1999).
Rowell RM, Hand Book of Wood Chemistry and Wood Composites, CRC Press, London (2012).
Faruk O, Saini M, Biofiber Reinforcements in Composite Materials, Woodhead Publishing, Elsevier, U.K. (2014).
Bledzki AK, Reihmane S, Gassan J, Polym. Plast. Technol. Eng., 37, 451 (1998)
Balasuriya PW, Ye L, Mai YW, Wu J, J. Appl. Polym. Sci., 83(12), 2505 (2002)
Kim JP, Yoon TH, Mun SP, Rhee JM, Lee JS, Bioresour. Technol., 97(3), 494 (2006)
Adhikary KB, Pang S, Staiger MP, Compos. B: Eng., 39, 807 (2008)
Nourbakhsh A, Ashori A, J. Compos. Mat., 43, 877 (2009)
Ndlovu SS, Reenen AJ, Luyt AS, Compos. Pt. A-Appl. Sci. Manuf., 51, 80 (2013)
Rodriguez-Llamazares S, Zuniga A, Castano J, Radovic LR, J. Appl. Polym. Sci., 122(3), 1731 (2011)
Tisserat B, Reifschneider L, Joshee N, Finkenstadt VL, BioResour., 8, 4440 (2013)
Sewda K, Maiti SN, Polym. Bull., 70(10), 2657 (2013)
Hanif MPM, Supri AG, Firuz Z, Appl. Mech. Mat., 679, 132 (2014)
Bengtsson M, Gatenholm P, Oksman K, Compos. Sci. Technol., 65, 1468 (2005)
AlMaadeed MA, Nogellova Z, Micusik M, Novak I, Krupa I, Mater. Des., 53, 29 (2014)
Mirmehdi SM, Zeinaly F, Dabbagh F, Compos. B: Eng., 56, 137 (2014)
Cui Y, Lee S, Noruziaan B, Cheung M, Tao J, Compos. Pt. A-Appl. Sci. Manuf., 39, 655 (2008)
Geng Y, Li K, Simonsen J, J. Appl. Polym. Sci., 91, 3667 (2004)
Selke SE, Wichman I, Compos. Pt. A-Appl. Sci. Manuf., 35, 321 (2004)
Atuanya CU, Ibhadode AOA, Igboanugo AC, Tribology Indust., 33, 11 (2011)
Marcovich NE, Villar MA, J. Appl. Polym. Sci., 90(10), 2775 (2003)
Raj RG, Kokta BV, Maldas D, Daneault C, Polym. Compos., 9, 404 (1988)
Hong H, Liao H, Zhang H, He H, Liu T, Jia D, Compos. Pt. A-Appl. Sci. Manuf., 64, 90 (2014)
Li B, He J, Polym. Degrad. Stabil., 83, 241 (2004)
Pan M, Mei C, Song Y, BioResour., 7, 1760 (2012)
Stark NM, White RH, Mueller SA, Osswald TA, Polym. Degrad. Stabil., 95, 1903 (2010)
Stark NM, Matuana LM, J. Appl. Polym. Sci., 90(10), 2609 (2003)
Stark NM, Matuana LM, Clemons CM, J. Appl. Polym. Sci., 93(3), 1021 (2004)
Kuan CF, Kuan HC, Ma CCM, Huang CM, Compos. Pt. A-Appl. Sci. Manuf., 37, 1696 (2006)
Yuan Q, Wu D, Gotama J, Bateman S, J. Thermoplast. Compos. Mater., 21, 195 (2008)
Coutinho FM, Costa TH, Carvalho DL, J. Appl. Polym. Sci., 65(6), 1227 (1997)
Zaini WIJ, Ismail MYAE, Mansor MS, Mustafah J, Polym. Int., 40, 51 (1996)
Perez E, Fama L, Pardo SG, Abad MJ, Bernal C, Compos. B:Eng., 43, 2795 (2012)
Bledzki AK, Faruk O, Appl. Compos. Mater., 10, 365 (2003)
Thumm A, Dickson AR, Compos. Pt. A-Appl. Sci. Manuf., 46, 45 (2013)
Nunez AJ, Sturm PC, Kenny JM, Aranguren MI, Marcovich NE, Reboredo MM, J. Appl. Polym. Sci., 88(6), 1420 (2003)
Sombatsompop N, Yotinwattanakumtorn C, Thongpin C, J. Appl. Polym. Sci., 97(2), 475 (2005)
Correa CA, Razzino CA, Hage E, J. Thermoplast. Compos. Mater., 20, 323 (2007)
Ichazo MN, Albano C, Gonzalez J, Perera R, Candal MV, Compos. Struct., 54, 207 (2001)
Karmarkar A, Chauhan SS, Modak JM, Chanda M, Compos. Pt. A-Appl. Sci. Manuf., 38, 227 (2007)
Nachtigall SMB, Cerveira GS, Rosa SML, Polym. Test, 26, 619 (2007)
Dominkovics Z, Danyadi L, Pukanszky B, Compos. Pt. A-Appl. Sci. Manuf., 38, 1893 (2007)
Danyadi L, Janecska T, Szabo Z, Nagy G, Moczo J, Pukanszky B, Compos. Sci. Technol., 67, 2838 (2007)
Bouza R, Lasagabaster A, Abad MJ, Barral L, J. Appl. Polym. Sci., 109(2), 1197 (2008)
Gwon JG, Lee SY, Chun SJ, Doh GH, Kim JH, Korean J. Chem. Eng., 27(2), 651 (2010)
Xie Y, Krause A, Militz H, Steuernagel L, Mai C, Compos. Pt. A-Appl. Sci. Manuf., 44, 32 (2013)
Poletto M, Zattera AJ, Santana RMC, Polym. Compos., 35, 1935 (2014)
Malakani M, Bazyar B, Talaiepour M, Hemmasi AH, Ghasemi I, BioResour., 10, 2113 (2015)
Chatree H, Thanate R, Wiriya T, J. Thermoplast. Compos. Mater., 28, 179 (2015)
Hristov VN, Krumova M, Vasileva S, Michler GH, J. Appl. Polym. Sci., 92(2), 1286 (2004)
Hristov N, Lach R, Grellmann W, Polym. Test, 23, 581 (2004)
Hristov VN, Vasileva S, Polym. Compos., 25, 521 (2004)
Danyadi L, Moczo J, Pukanszky B, Compos. Pt. A-Appl. Sci. Manuf., 41, 199 (2010)
Rimdusit S, Wongsongyot S, Jittarom S, Suwanmala P, Tiptipakorn S, J. Polym. Res., 18, 801 (2011)
Stark N, J. Thermoplast. Compos. Mater., 14, 421 (2001)
Lin QF, Zhou XD, Dai G, J. Appl. Polym. Sci., 85(14), 2824 (2002)
Bledzki AK, Faruk O, Compos. Sci. Technol., 64, 693 (2004)
Mishra S, Verma J, J. Appl. Polym. Sci., 101(4), 2530 (2006)
Borysiak S, Paukszta D, Helwig M, Polym. Degrad. Stabil., 91, 3339 (2006)
Borysiak S, J. Therm. Anal. Calorim., 119, 1955 (2015)
Arao Y, Nakamura S, Tomita Y, Takakuwa K, Umemura T, Tanaka T, Polym. Degrad. Stabil., 100, 79 (2014)
Guan YH, Liao W, Xu ZZ, Chen MJ, Huang JQ, Wang YZ, RSC Adv., 5, 59865 (2015)
Jiang H, Kamdem DP, J. Vinyl Addit. Technol., 10, 59 (2004)
Rocha N, Kazlauciunas A, Gil MH, Goncalves PM, Guthrie JT, Compos. Pt. A-Appl. Sci. Manuf., 40, 653 (2009)
Ashori A, Kiani H, Mozaffari SA, J. Appl. Polym. Sci., 120(3), 1788 (2011)
Joshi PS, Marathe DS, J. Reinforc. Plast. Compos., 29, 2522 (2010)
Thanate R, Panuk L, Songpol U, J. Thermoplast. Compos. Mater., 27, 719 (2014)
Kociszewski M, Gozdecki C, Wilczynski A, Zajchowski S, Mirowski J, Eur. J. Wood Prod., 70, 113 (2012)
Petchwattana N, Covavisaruch S, J. Bionic Eng., 10, 110 (2013)
Shah BL, Matuana LM, J. Vinyl Addit. Technol., 11, 160 (2005)
Xu K, Li K, Zhong T, Guan L, Xie C, Li S, Compos. B: Eng., 58, 392 (2014)
Muller M, Militz H, Krause A, Polym. Degrad. Stabil., 97, 166 (2012)
Muller M, Radovanovic I, Gruneberg T, Militz H, Krause A, J. Appl. Polym. Sci., 125(1), 308 (2012)
Muller M, Gruneberg T, Militz H, Krause A, J. Appl. Polym. Sci., 124(6), 4542 (2012)
Muller M, Gellerich A, Militz H, Krause A, Eur. J. Wood Prod., 71, 199 (2013)
Zhu D, Sheng Y, Liu X, Chen Q, J. Reinforc. Plast. Compos., 31, 1025 (2012)
Zhang X, Zhang Y, Jin D, Zhu M, Wu Q, J. Biobased Mat. Bioenergy, 9, 155 (2015)
Valle GCX, Tavares MIB, Luetkmeyer L, Stael GC, Macromol. Symp., 258, 113 (2007)
Jiang HH, Kamdem DP, J. Appl. Polym. Sci., 107(2), 951 (2008)
Fang Y, Wang Q, Bai X, Wang W, Cooper PA, J. Therm. Anal. Calorim., 109, 1577 (2012)
Pilarski JM, Matuana LM, J. Vinyl Addit. Technol., 11, 1 (2005)
Fabiyi JS, McDonald AG, J. Rein. Plast. Compos., 32, 547 (2012)
Chaochanchaikul K, Rosarpitak V, Sombatsompop N, eXP. Polym. Let., 7, 146 (2013)
Kositchaiyong A, Rosarpitak V, Prapagdee B, Sombatsompop N, Compos. B: Eng., 53, 25 (2013)
Kositchaiyong A, Rosarpitak V, Hamada H, Sombatsompop N, Int. Biodeter. Biodegrad., 91, 128 (2014)
Maldas D, Kokta BV, Raj RG, Daneault C, Polymer, 29, 1255 (1988)
Maldas D, Kokta BV, J. Appl. Polym. Sci., 41, 185 (1990)
Maldas D, Kokta BV, J. Appl. Polym. Sci., 40, 917 (1990)
Maldas D, Kokta BV, Polym. Eng. Sci., 31, 1351 (1991)
Maldas D, Kokta BV, J. Adhes. Sci. Technol., 3, 529 (2012)
Poletto M, Zeni M, Zattera AJ, J. Thermoplast. Compos. Mater., 1, 1 (2011)
Poletto M, Dettenborn J, Zeni M, Zattera AJ, Waste Manage., 31, 779 (2011)
Lisperguer J, Bustos X, Saravia Y, J. Appl. Polym. Sci., 119(1), 443 (2011)
Huda MS, Drzal LT, Misra M, Mohanty AK, J. Appl. Polym. Sci., 102(5), 4856 (2006)
Takatani M, Ikeda K, Sakamoto K, Okamoto T, J. Wood Sci., 54, 54 (2008)
Petinakis E, Yu L, Edward G, Dean K, Liu H, Scully AD, J. Polym. Environ., 17, 83 (2009)
Dikobe DG, Luyt AS, J. Appl. Polym. Sci., 104(5), 3206 (2007)
Rahman KS, Islam MN, Rahman MM, Hannan MO, Dungani R, Khalil HPSA, SpringerPlus, 2, 629 (2013)
Kord B, Hooman A, Ghasemi HI, Wood Sci. Technol., 45, 111 (2011)
Zhao Y, Wang K, Zhu F, Xue P, Jia M, Polym. Degrad. Stabil., 91, 2874 (2006)
Deka BK, Mandal M, Maji TK, J. Reinf. Plast. Compos., 31, 657 (2012)
Lee H, Kim DS, J. Appl. Polym. Sci., 111(6), 2769 (2009)
Islam MS, Ahmad MB, Hasan M, Aziz SA, Jawaid M, Haafiz MKM, Zakaria SAH, BioResour., 10, 1394 (2015)
Tabari HZ, Danesh MA, Pia RH, Nourbakhsh A, Int. Conf. Nanotechnol. Biosensors, 2, 20 (2011)
Yeh SK, Gupta RK, Polym. Eng. Sci., 50(10), 2013 (2010)
Lee YH, Kuboki T, Park CB, Sain M, Kontopoulou M, J. Appl. Polym. Sci., 118(1), 452 (2010)
Sheshmani S, Ashori A, Hamzeh Y, J. Appl. Polym. Sci., 118(6), 3255 (2010)
Khanjanzadeh H, Pirayesh H, Salari A, Eur. J. Wood Prod., 71, 211 (2013)
Lee YH, Kuboki T, Park CB, Sail M, Polym. Eng. Sci., 51(5), 1014 (2011)
Faruk O, Matuana LM, Compos. Sci. Technol., 68, 2073 (2008)
Faruk O, Matuana LM, J. Vinyl Addtv. Technol., 14, 60 (2008)
Fu SY, Song PA, Yang HT, Jin YM, Lu FZ, Ye JW, Wu Q, J. Mater. Sci., 45(13), 3520 (2010)
Kordkheili HY, Farsi M, Rezazadeh Z, Compos. B: Eng., 44, 750 (2013)
Tabar MM, Tabarsa T, Mashkour M, Khazaeian A, J. Indian Academy Wood Sci., 12, 15 (2015)
Zhang ZX, Zhang J, Lu BX, Xin ZX, Kang CK, Kim JK, Compos. B: Eng., 43, 150 (2012)
Deka BK, Maji TK, Compos. Pt. A-Appl. Sci. Manuf., 42, 2117 (2011)
Deka BK, Maji TK, Polym. Eng. Sci., 6, 1 (2012)
Deka BK, Maji TK, Compos. Sci. Technol., 70, 1755 (2010)
Ford M, Proc. Fifth Int. Conf. on Wood fiber-Plast. Compos., Forest Prod. Soc., Madison, WI, 199 (May 1999).
Ashori A, Bioresour. Technol., 99(11), 4661 (2008)
Turku I, Karki T, J. Thermplast Comp. Mater., 27, 180 (2014)
Ismail H, Salmah A, Nasir M, Polym. Test, 20, 819 (2001)
Oksman K, Clemons C, J. Appl. Polym. Sci., 67(9), 1503 (1998)
Bledzki AK, Reihmane S, Gassan J, Polym. Plast. Technol. Eng., 37, 451 (1998)
Stain MM, Kokta BV, Imbert C, Polym. Plast. Technol. Eng., 33, 89 (1994)
Felix JM, Gatenholm PJ, J. Appl. Polym. Sci., 50, 699 (1993)
Gauthier R, Joly C, Coupas A, Gauthier H, Escoubes M, Polym. Compos., 19, 287 (1998)
Park B, Kim DS, Polym. Korea, 35(2), 124 (2011)
Jang SY, Kim DS, Polym. Korea, 39(1), 130 (2015)
Seo YW, Kim DS, Polym. Korea, 38(3), 327 (2014)
Wang Y, Yeh FC, Lai SM, Chan HC, Shen HF, Polym. Eng. Sci., 43(4), 933 (2003)
Lai SM, Yeh FC, Wang Y, Chan HC, Shen HF, J. Appl. Polym. Sci., 87(3), 487 (2003)
Lu JZ, Wu QL, Negulescu II, J. Appl. Polym. Sci., 96(1), 93 (2005)
Gonzalez L, Rodriguez A, Debenito JL, Marcosfernandez A, J. Appl. Polym. Sci., 63(10), 1353 (1997)
Culler SR, Ishida H, Koenig JL, Polym. Compos., 7, 231 (1986)
Ricardo BS, Peter WH, Hasan J, Hou-min C, Bioresour. Technol., 8, 1456 (2013)
Kalia S, Kaushik VK, Sharma RK, J. Nat. Fibers, 8, 27 (2011)
Prasad N, Agarwal VK, Sinha S, Korean J. Chem. Eng., 32(12), 2534 (2015)
Valadez-Gonzalez A, Cervantes-Uc JM, Olayo R, Herrera-Franco PJ, Compos. Pt. B-Eng., 30, 321 (1999)
Poletto M, Zattera AJ, Forte MMC, Santana RMC, Bioresour. Technol., 109, 148 (2012)
Hetzer M, De Kee D, Chem. Eng. Res. Des., 86(10A), 1083 (2008)
Lundin T, Effect of Accelerated Weathering on the Physical and Mechanical Properties of Natural-Fiber Thermoplastic Composites, M. S. Thesis, University of Wisconsin-Madison (2001).
Osswald TA, Menges G, Materials Science of Polymers for Engineers, Hanser Publishers, New York (1995).
DeFosse M, Modern Plast., 80, 25 (2003)
Saheb DN, Jog JP, Adv. Polym. Technol., 18(4), 351 (1999)
Adler E, Wood Sci. Technol., 11, 169 (1977)
Eichhorn S, Baillie C, J. Mater., 6, 2107 (2001)
Kim EG, Kim BS, Kim DS, J. Appl. Polym. Sci., 103(2), 928 (2007)
Matuana LM, Polym. Compos., 19, 446 (1998)
Agrawal R, Saxena NS, Sharma KB, Thomas S, Sreekala MS, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 277, 77 (2000)
Weyenberg I, Ivens J, Coster A, Kino B, Baetens E, Verpoest I, Compos. Sci. Technol., 63, 1241 (2003)
Yim H, Kim DS, Polym. Adv. Technol., 23, 1441 (2012)
Paul A, Joseph K, Thomas S, Compos. Sci. Technol., 57, 67 (1997)
Joseph K, Thomas S, Pavithran C, Polymer, 37(23), 5139 (1996)
Sreekala MS, Kumaran MG, Joseph S, Jacob M, Thomas S, Appl. Compos. Mater., 7, 295 (2000)
Sreekala MS, Kumaran MG, Thomas S, Compos. Pt. A-Appl. Sci. Manuf., 33, 763 (2002)
Harnnarongchai W, Kaschta J, Schubert DW, Sombatsompop N, Polym. Compos., 33, 2084 (2012)
Rong MZ, Zhang MQ, Liu Y, Yang GC, Zeng HM, Compos. Sci. Technol., 61, 1437 (2001)
Yakubu A, Gabriel AO, Cheku M, Paul AM, Int. J. Carbohydrat. Chem., ID 141034 (2013)
Peydecastaing J, Girardeau S, Vaca-Garcia C, Borredon M, Cellulose, 13, 95 (2006)
Freire CSR, Silvestre AJD, Neto CP, Belgacem MN, Gandini A, J. Appl. Polym. Sci., 100(2), 1093 (2006)
Dong X, Dong Y, Jiang M, Wang L, Tong J, Zhou J, Ind. Crop. Prod., 46, 301 (2013)
Shang W, Huang J, Luo H, Chang PR, Feng J, Xie G, Cellulose, 20, 179 (2013)
Dankovchi TA, Hsieh YL, Cellulose, 14, 469 (2007)
Jang SY, Kim DS, J. Appl. Polym. Sci., 144, 42929 (2016)
Zafeiropoulos NE, Compos. Pt. A-Appl. Sci. Manuf., 33, 1083 (2002)
Gregorova A, Wimmer R, Hrabalova M, Koller M, Ters T, Mundigler N, Holzforschung, 63, 565 (2009)
Bledzki AK, Sperber VE, Proc. Fifth Int. Conf. on Wood fiber-Plast. Compos., Forest Prod. Soc., Madison, Wis., 187 (May 1999).
Rowell RM, Hand Book of Wood Chemistry and Wood Composites, CRC Press, London (2012).
Faruk O, Saini M, Biofiber Reinforcements in Composite Materials, Woodhead Publishing, Elsevier, U.K. (2014).
Bledzki AK, Reihmane S, Gassan J, Polym. Plast. Technol. Eng., 37, 451 (1998)
Balasuriya PW, Ye L, Mai YW, Wu J, J. Appl. Polym. Sci., 83(12), 2505 (2002)
Kim JP, Yoon TH, Mun SP, Rhee JM, Lee JS, Bioresour. Technol., 97(3), 494 (2006)
Adhikary KB, Pang S, Staiger MP, Compos. B: Eng., 39, 807 (2008)
Nourbakhsh A, Ashori A, J. Compos. Mat., 43, 877 (2009)
Ndlovu SS, Reenen AJ, Luyt AS, Compos. Pt. A-Appl. Sci. Manuf., 51, 80 (2013)
Rodriguez-Llamazares S, Zuniga A, Castano J, Radovic LR, J. Appl. Polym. Sci., 122(3), 1731 (2011)
Tisserat B, Reifschneider L, Joshee N, Finkenstadt VL, BioResour., 8, 4440 (2013)
Sewda K, Maiti SN, Polym. Bull., 70(10), 2657 (2013)
Hanif MPM, Supri AG, Firuz Z, Appl. Mech. Mat., 679, 132 (2014)
Bengtsson M, Gatenholm P, Oksman K, Compos. Sci. Technol., 65, 1468 (2005)
AlMaadeed MA, Nogellova Z, Micusik M, Novak I, Krupa I, Mater. Des., 53, 29 (2014)
Mirmehdi SM, Zeinaly F, Dabbagh F, Compos. B: Eng., 56, 137 (2014)
Cui Y, Lee S, Noruziaan B, Cheung M, Tao J, Compos. Pt. A-Appl. Sci. Manuf., 39, 655 (2008)
Geng Y, Li K, Simonsen J, J. Appl. Polym. Sci., 91, 3667 (2004)
Selke SE, Wichman I, Compos. Pt. A-Appl. Sci. Manuf., 35, 321 (2004)
Atuanya CU, Ibhadode AOA, Igboanugo AC, Tribology Indust., 33, 11 (2011)
Marcovich NE, Villar MA, J. Appl. Polym. Sci., 90(10), 2775 (2003)
Raj RG, Kokta BV, Maldas D, Daneault C, Polym. Compos., 9, 404 (1988)
Hong H, Liao H, Zhang H, He H, Liu T, Jia D, Compos. Pt. A-Appl. Sci. Manuf., 64, 90 (2014)
Li B, He J, Polym. Degrad. Stabil., 83, 241 (2004)
Pan M, Mei C, Song Y, BioResour., 7, 1760 (2012)
Stark NM, White RH, Mueller SA, Osswald TA, Polym. Degrad. Stabil., 95, 1903 (2010)
Stark NM, Matuana LM, J. Appl. Polym. Sci., 90(10), 2609 (2003)
Stark NM, Matuana LM, Clemons CM, J. Appl. Polym. Sci., 93(3), 1021 (2004)
Kuan CF, Kuan HC, Ma CCM, Huang CM, Compos. Pt. A-Appl. Sci. Manuf., 37, 1696 (2006)
Yuan Q, Wu D, Gotama J, Bateman S, J. Thermoplast. Compos. Mater., 21, 195 (2008)
Coutinho FM, Costa TH, Carvalho DL, J. Appl. Polym. Sci., 65(6), 1227 (1997)
Zaini WIJ, Ismail MYAE, Mansor MS, Mustafah J, Polym. Int., 40, 51 (1996)
Perez E, Fama L, Pardo SG, Abad MJ, Bernal C, Compos. B:Eng., 43, 2795 (2012)
Bledzki AK, Faruk O, Appl. Compos. Mater., 10, 365 (2003)
Thumm A, Dickson AR, Compos. Pt. A-Appl. Sci. Manuf., 46, 45 (2013)
Nunez AJ, Sturm PC, Kenny JM, Aranguren MI, Marcovich NE, Reboredo MM, J. Appl. Polym. Sci., 88(6), 1420 (2003)
Sombatsompop N, Yotinwattanakumtorn C, Thongpin C, J. Appl. Polym. Sci., 97(2), 475 (2005)
Correa CA, Razzino CA, Hage E, J. Thermoplast. Compos. Mater., 20, 323 (2007)
Ichazo MN, Albano C, Gonzalez J, Perera R, Candal MV, Compos. Struct., 54, 207 (2001)
Karmarkar A, Chauhan SS, Modak JM, Chanda M, Compos. Pt. A-Appl. Sci. Manuf., 38, 227 (2007)
Nachtigall SMB, Cerveira GS, Rosa SML, Polym. Test, 26, 619 (2007)
Dominkovics Z, Danyadi L, Pukanszky B, Compos. Pt. A-Appl. Sci. Manuf., 38, 1893 (2007)
Danyadi L, Janecska T, Szabo Z, Nagy G, Moczo J, Pukanszky B, Compos. Sci. Technol., 67, 2838 (2007)
Bouza R, Lasagabaster A, Abad MJ, Barral L, J. Appl. Polym. Sci., 109(2), 1197 (2008)
Gwon JG, Lee SY, Chun SJ, Doh GH, Kim JH, Korean J. Chem. Eng., 27(2), 651 (2010)
Xie Y, Krause A, Militz H, Steuernagel L, Mai C, Compos. Pt. A-Appl. Sci. Manuf., 44, 32 (2013)
Poletto M, Zattera AJ, Santana RMC, Polym. Compos., 35, 1935 (2014)
Malakani M, Bazyar B, Talaiepour M, Hemmasi AH, Ghasemi I, BioResour., 10, 2113 (2015)
Chatree H, Thanate R, Wiriya T, J. Thermoplast. Compos. Mater., 28, 179 (2015)
Hristov VN, Krumova M, Vasileva S, Michler GH, J. Appl. Polym. Sci., 92(2), 1286 (2004)
Hristov N, Lach R, Grellmann W, Polym. Test, 23, 581 (2004)
Hristov VN, Vasileva S, Polym. Compos., 25, 521 (2004)
Danyadi L, Moczo J, Pukanszky B, Compos. Pt. A-Appl. Sci. Manuf., 41, 199 (2010)
Rimdusit S, Wongsongyot S, Jittarom S, Suwanmala P, Tiptipakorn S, J. Polym. Res., 18, 801 (2011)
Stark N, J. Thermoplast. Compos. Mater., 14, 421 (2001)
Lin QF, Zhou XD, Dai G, J. Appl. Polym. Sci., 85(14), 2824 (2002)
Bledzki AK, Faruk O, Compos. Sci. Technol., 64, 693 (2004)
Mishra S, Verma J, J. Appl. Polym. Sci., 101(4), 2530 (2006)
Borysiak S, Paukszta D, Helwig M, Polym. Degrad. Stabil., 91, 3339 (2006)
Borysiak S, J. Therm. Anal. Calorim., 119, 1955 (2015)
Arao Y, Nakamura S, Tomita Y, Takakuwa K, Umemura T, Tanaka T, Polym. Degrad. Stabil., 100, 79 (2014)
Guan YH, Liao W, Xu ZZ, Chen MJ, Huang JQ, Wang YZ, RSC Adv., 5, 59865 (2015)
Jiang H, Kamdem DP, J. Vinyl Addit. Technol., 10, 59 (2004)
Rocha N, Kazlauciunas A, Gil MH, Goncalves PM, Guthrie JT, Compos. Pt. A-Appl. Sci. Manuf., 40, 653 (2009)
Ashori A, Kiani H, Mozaffari SA, J. Appl. Polym. Sci., 120(3), 1788 (2011)
Joshi PS, Marathe DS, J. Reinforc. Plast. Compos., 29, 2522 (2010)
Thanate R, Panuk L, Songpol U, J. Thermoplast. Compos. Mater., 27, 719 (2014)
Kociszewski M, Gozdecki C, Wilczynski A, Zajchowski S, Mirowski J, Eur. J. Wood Prod., 70, 113 (2012)
Petchwattana N, Covavisaruch S, J. Bionic Eng., 10, 110 (2013)
Shah BL, Matuana LM, J. Vinyl Addit. Technol., 11, 160 (2005)
Xu K, Li K, Zhong T, Guan L, Xie C, Li S, Compos. B: Eng., 58, 392 (2014)
Muller M, Militz H, Krause A, Polym. Degrad. Stabil., 97, 166 (2012)
Muller M, Radovanovic I, Gruneberg T, Militz H, Krause A, J. Appl. Polym. Sci., 125(1), 308 (2012)
Muller M, Gruneberg T, Militz H, Krause A, J. Appl. Polym. Sci., 124(6), 4542 (2012)
Muller M, Gellerich A, Militz H, Krause A, Eur. J. Wood Prod., 71, 199 (2013)
Zhu D, Sheng Y, Liu X, Chen Q, J. Reinforc. Plast. Compos., 31, 1025 (2012)
Zhang X, Zhang Y, Jin D, Zhu M, Wu Q, J. Biobased Mat. Bioenergy, 9, 155 (2015)
Valle GCX, Tavares MIB, Luetkmeyer L, Stael GC, Macromol. Symp., 258, 113 (2007)
Jiang HH, Kamdem DP, J. Appl. Polym. Sci., 107(2), 951 (2008)
Fang Y, Wang Q, Bai X, Wang W, Cooper PA, J. Therm. Anal. Calorim., 109, 1577 (2012)
Pilarski JM, Matuana LM, J. Vinyl Addit. Technol., 11, 1 (2005)
Fabiyi JS, McDonald AG, J. Rein. Plast. Compos., 32, 547 (2012)
Chaochanchaikul K, Rosarpitak V, Sombatsompop N, eXP. Polym. Let., 7, 146 (2013)
Kositchaiyong A, Rosarpitak V, Prapagdee B, Sombatsompop N, Compos. B: Eng., 53, 25 (2013)
Kositchaiyong A, Rosarpitak V, Hamada H, Sombatsompop N, Int. Biodeter. Biodegrad., 91, 128 (2014)
Maldas D, Kokta BV, Raj RG, Daneault C, Polymer, 29, 1255 (1988)
Maldas D, Kokta BV, J. Appl. Polym. Sci., 41, 185 (1990)
Maldas D, Kokta BV, J. Appl. Polym. Sci., 40, 917 (1990)
Maldas D, Kokta BV, Polym. Eng. Sci., 31, 1351 (1991)
Maldas D, Kokta BV, J. Adhes. Sci. Technol., 3, 529 (2012)
Poletto M, Zeni M, Zattera AJ, J. Thermoplast. Compos. Mater., 1, 1 (2011)
Poletto M, Dettenborn J, Zeni M, Zattera AJ, Waste Manage., 31, 779 (2011)
Lisperguer J, Bustos X, Saravia Y, J. Appl. Polym. Sci., 119(1), 443 (2011)
Huda MS, Drzal LT, Misra M, Mohanty AK, J. Appl. Polym. Sci., 102(5), 4856 (2006)
Takatani M, Ikeda K, Sakamoto K, Okamoto T, J. Wood Sci., 54, 54 (2008)
Petinakis E, Yu L, Edward G, Dean K, Liu H, Scully AD, J. Polym. Environ., 17, 83 (2009)
Dikobe DG, Luyt AS, J. Appl. Polym. Sci., 104(5), 3206 (2007)
Rahman KS, Islam MN, Rahman MM, Hannan MO, Dungani R, Khalil HPSA, SpringerPlus, 2, 629 (2013)
Kord B, Hooman A, Ghasemi HI, Wood Sci. Technol., 45, 111 (2011)
Zhao Y, Wang K, Zhu F, Xue P, Jia M, Polym. Degrad. Stabil., 91, 2874 (2006)
Deka BK, Mandal M, Maji TK, J. Reinf. Plast. Compos., 31, 657 (2012)
Lee H, Kim DS, J. Appl. Polym. Sci., 111(6), 2769 (2009)
Islam MS, Ahmad MB, Hasan M, Aziz SA, Jawaid M, Haafiz MKM, Zakaria SAH, BioResour., 10, 1394 (2015)
Tabari HZ, Danesh MA, Pia RH, Nourbakhsh A, Int. Conf. Nanotechnol. Biosensors, 2, 20 (2011)
Yeh SK, Gupta RK, Polym. Eng. Sci., 50(10), 2013 (2010)
Lee YH, Kuboki T, Park CB, Sain M, Kontopoulou M, J. Appl. Polym. Sci., 118(1), 452 (2010)
Sheshmani S, Ashori A, Hamzeh Y, J. Appl. Polym. Sci., 118(6), 3255 (2010)
Khanjanzadeh H, Pirayesh H, Salari A, Eur. J. Wood Prod., 71, 211 (2013)
Lee YH, Kuboki T, Park CB, Sail M, Polym. Eng. Sci., 51(5), 1014 (2011)
Faruk O, Matuana LM, Compos. Sci. Technol., 68, 2073 (2008)
Faruk O, Matuana LM, J. Vinyl Addtv. Technol., 14, 60 (2008)
Fu SY, Song PA, Yang HT, Jin YM, Lu FZ, Ye JW, Wu Q, J. Mater. Sci., 45(13), 3520 (2010)
Kordkheili HY, Farsi M, Rezazadeh Z, Compos. B: Eng., 44, 750 (2013)
Tabar MM, Tabarsa T, Mashkour M, Khazaeian A, J. Indian Academy Wood Sci., 12, 15 (2015)
Zhang ZX, Zhang J, Lu BX, Xin ZX, Kang CK, Kim JK, Compos. B: Eng., 43, 150 (2012)
Deka BK, Maji TK, Compos. Pt. A-Appl. Sci. Manuf., 42, 2117 (2011)
Deka BK, Maji TK, Polym. Eng. Sci., 6, 1 (2012)
Deka BK, Maji TK, Compos. Sci. Technol., 70, 1755 (2010)
