Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received August 9, 2016
Accepted June 20, 2017
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Hydrocracking of waste lubricant into gasoline fraction over CoMo catalyst supported on mesoporous carbon from bovine bone gelatin
Department of Chemistry, Universitas Gadjah Mada, Yogyakarta, 55281, Indonesia
Wegats@ugm.ac.id
Korean Journal of Chemical Engineering, October 2017, 34(10), 2591-2596(6), 10.1007/s11814-017-0165-3
Download PDF
Abstract
The hydrocracking of waste lubricant into gasoline fraction was carried out using CoMo catalyst supported on mesoporous carbon. The carbon was synthesized using bovine bone gelatin and SBA-15 as a template. The metals were loaded onto the carbon by wet impregnation method. The total metal content of catalyst was prepared into two different amounts which were labelled as CoMo/MCG1 and CoMo/MCG2. Catalytic activity and selectivity were evaluated in hydrocracking of waste lubricant at 450, 475, and 500 °C, and lubricant/catalyst weight ratio of 50, 100, 200, 300, and 400. The result revealed that acidity and specific surface area of the catalyst played an important role in determining the catalytic performance in the hydrocracking of waste lubricant. The highest percentage of gasoline fraction was 58.09%, produced by hydrocracking of waste lubricant at 475 °C and lubricant/catalyst weight ratio of 300 using CoMo/MCG2 catalyst.
References
Permsubscul A, Vitidsant T, Damronglerd S, Korean J. Chem. Eng., 24(1), 37 (2006)
Trisunaryanti W, Purwono S, Putranto A, Indo. J. Chem., 8(3), 342 (2008)
Trisunaryanti W, Syoufian A, Purwono S, J. Chem. Chem Eng., 7, 175 (2013)
Egorova M, Prins R, J. Catal., 225(2), 417 (2004)
Hussain M, Song SK, Lee JH, Ihm SK, Ind. Eng. Chem. Res., 45(2), 536 (2006)
Boukoberine Y, Hamada B, Arabian J. Chem., 9(1), 522 (2016)
Soghrati E, Kazemeini M, Rashidi MA, Jozani JK, Procedia Eng., 42, 1484 (2012)
Sriningsih W, Saerodji MG, Trisunaryanti W, Armunanto R, Falah II, Procedia Environ. Sci., 20, 215 (2014)
Fan Y, Lu J, Shi G, Liu HY, Bao XJ, Catal. Today, 125(3-4), 220 (2007)
Hussain M, Ihm S, Ind. Eng. Chem. Res., 3, 698 (2009)
He X, Zhang Y, Zhu C, Huang H, Hu H, Liu Y, Kang Z, New. J. Chem. (2015), DOI:10.1039/C5NJ01430A.
Yeom DH, Choi J, Byun WJ, Lee JK, Korean J. Chem. Eng., 33(10), 3029 (2016)
Lu A, Li W, Schmidt W, Kiefer W, Ferdi S, Carbon, 42, 2939 (2004)
Sakintuna B, Yurum Y, Microporous Mesoporous Mater., 93, 304 (2006)
Kamegawa K, Kodama M, Nishikubo K, Yamada H, Adachi Y, Yoshida H, Microporous Mesoporous Mater., 87, 118 (2005)
Valle-Vigon P, Sevilla M, Fuertes AB, Appl. Surf. Sci., 261, 574 (2012)
Ulfa M, Trisunaryanti W, Falah II, Kartini I, Sutarno, JAC, 7(5), 1 (2014)
Lee J, Hwang S, Lee SB, Song IK, Korean J. Chem. Eng., 27(6), 1755 (2010)
Jung JS, Kim TJ, Seo G, Korean J. Chem. Eng., 21(4), 777 (2004)
Ramos JM, Wang JA, Chen LF, Arellano U, Ramirez SP, Sotelo R, Schachat P, Catal. Commun., 72, 57 (2015)
Ahmadi S, Yuan ZS, Rohani S, Xu CB, Catal. Today, 269, 182 (2016)
Le MT, Do VH, Truong DD, Bruneel E, Van Driessche I, Riisager A, Fehrmann R, Trinh QT, Ind. Eng. Chem. Res., 55(17), 4846 (2016)
Maiyalagan T, Nassr AA, Alaje TO, Bron M, Scott K, J. Power Sources, 211, 147 (2012)
Sie ST, Ind. Eng. Chem. Res., 31, 1881 (2003)
Chandrasekar G, Son WJ, Ahn WS, J. Porous Mat., 16, 545 (2009)
Lee J, Choi Y, Shin J, Lee JK, Catal. Today (2015), DOI:10.1016/j.cattod.2015.09.046.
Ishihara A, Tanaka S, Aiba M, Hashimoto T, Nasu H, J. Jpn. Petrol. Inst, 58, 2 (2015)
Yang J, Dong Y, Li J, Liu Z, Min F, Li Y, Korean J. Chem. Eng., 32(11), 2247 (2015)
Trisunaryanti W, Purwono S, Putranto A, Indo. J. Chem., 8(3), 342 (2008)
Trisunaryanti W, Syoufian A, Purwono S, J. Chem. Chem Eng., 7, 175 (2013)
Egorova M, Prins R, J. Catal., 225(2), 417 (2004)
Hussain M, Song SK, Lee JH, Ihm SK, Ind. Eng. Chem. Res., 45(2), 536 (2006)
Boukoberine Y, Hamada B, Arabian J. Chem., 9(1), 522 (2016)
Soghrati E, Kazemeini M, Rashidi MA, Jozani JK, Procedia Eng., 42, 1484 (2012)
Sriningsih W, Saerodji MG, Trisunaryanti W, Armunanto R, Falah II, Procedia Environ. Sci., 20, 215 (2014)
Fan Y, Lu J, Shi G, Liu HY, Bao XJ, Catal. Today, 125(3-4), 220 (2007)
Hussain M, Ihm S, Ind. Eng. Chem. Res., 3, 698 (2009)
He X, Zhang Y, Zhu C, Huang H, Hu H, Liu Y, Kang Z, New. J. Chem. (2015), DOI:10.1039/C5NJ01430A.
Yeom DH, Choi J, Byun WJ, Lee JK, Korean J. Chem. Eng., 33(10), 3029 (2016)
Lu A, Li W, Schmidt W, Kiefer W, Ferdi S, Carbon, 42, 2939 (2004)
Sakintuna B, Yurum Y, Microporous Mesoporous Mater., 93, 304 (2006)
Kamegawa K, Kodama M, Nishikubo K, Yamada H, Adachi Y, Yoshida H, Microporous Mesoporous Mater., 87, 118 (2005)
Valle-Vigon P, Sevilla M, Fuertes AB, Appl. Surf. Sci., 261, 574 (2012)
Ulfa M, Trisunaryanti W, Falah II, Kartini I, Sutarno, JAC, 7(5), 1 (2014)
Lee J, Hwang S, Lee SB, Song IK, Korean J. Chem. Eng., 27(6), 1755 (2010)
Jung JS, Kim TJ, Seo G, Korean J. Chem. Eng., 21(4), 777 (2004)
Ramos JM, Wang JA, Chen LF, Arellano U, Ramirez SP, Sotelo R, Schachat P, Catal. Commun., 72, 57 (2015)
Ahmadi S, Yuan ZS, Rohani S, Xu CB, Catal. Today, 269, 182 (2016)
Le MT, Do VH, Truong DD, Bruneel E, Van Driessche I, Riisager A, Fehrmann R, Trinh QT, Ind. Eng. Chem. Res., 55(17), 4846 (2016)
Maiyalagan T, Nassr AA, Alaje TO, Bron M, Scott K, J. Power Sources, 211, 147 (2012)
Sie ST, Ind. Eng. Chem. Res., 31, 1881 (2003)
Chandrasekar G, Son WJ, Ahn WS, J. Porous Mat., 16, 545 (2009)
Lee J, Choi Y, Shin J, Lee JK, Catal. Today (2015), DOI:10.1016/j.cattod.2015.09.046.
Ishihara A, Tanaka S, Aiba M, Hashimoto T, Nasu H, J. Jpn. Petrol. Inst, 58, 2 (2015)
Yang J, Dong Y, Li J, Liu Z, Min F, Li Y, Korean J. Chem. Eng., 32(11), 2247 (2015)
