ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received August 26, 2016
Accepted November 29, 2016
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Preparation of Cu-MgO catalysts with different copper precursors and precipitating agents for the vapor-phase hydrogenation of furfural

1Gas Conversion Department, Faculty of Petrochemicals, Iran Polymer and Petrochemical Institute, P. O. Box 14975-112, Tehran, Iran 2Biomass Conversion Science and Technology (BCST) Division, Iran Polymer and Petrochemical Institute, P. O. Box 14975-115, Tehran, Iran 3Faculty of Petrochemicals, Iran Polymer and Petrochemical Institute, P. O. Box 14975-112, Tehran, Iran
m.ghashghaee@ippi.ac.ir, ghashghaee.m@gmail.com
Korean Journal of Chemical Engineering, March 2017, 34(3), 692-700(9), 10.1007/s11814-016-0344-7
downloadDownload PDF

Abstract

This article presents the effects of three copper precursors and four precipitating agents on the catalytic performance of the corresponding co-precipitated Cu-MgO catalysts in the vapor-phase hydrogenation of furfural. The chemical and physical properties were analyzed by means of XRD, BET, SEM, and EDX techniques. The nitrate precursor provided the highest performance (conversion of ~89%). Whereas, the catalyst prepared with NaOH was the most efficient (furfuryl alcohol yield of >90%) during 240min; the most durable conversion (~95%) was assured with Na2-CO3, and the highest selectivity to furfuryl alcohol (>97%) was achieved with K2CO3 as the precipitating agent. The least efficient catalyst (prepared with ammonium carbonate) led to 5-methylfurfural and 2,2-methylenebisfuran as the main byproducts. The major byproducts over the rest of the catalysts included tetrahydrofurfuryl alcohol, furfuryl ether, 1-pentanol, and 2-methylfuran. An increasing trend of furfuryl alcohol selectivity with time-on-stream was evident for all of the catalysts.

References

Wettstein SG, Alonso DM, Gurbuz EI, Dumesic JA, Curr. Opin. Chem. Biol., 1(3), 218 (2012)
Ulbrich K, The Conversion of Furan Derivatives from Renewable Resources into valuable Building Blocks and their Application in Synthetic Chemistry, PhD Dissertation, University of Regensburg (2014).
Jimenez-Gomez CP, Cecilia JA, Duran-Martin D, Moreno-Tost R, Santamaria-Gonzalez J, Merida-Robles J, Mariscal R, Maireles-Torres P, J. Catal., 336, 107 (2016)
Taylor MJ, Durndell LJ, Isaacs MA, Parlett CMA, Wilson K, Lee AF, Kyriakou G, Appl. Catal. B: Environ., 180, 580 (2016)
Climent MJ, Corma A, Iborra S, Green Chem., 16(2), 516 (2014)
Yan K, Wu G, Lafleur T, Jarvis C, Renew. Sust. Energ. Rev., 38, 663 (2014)
Yan K, Wu X, An X, Xie X, Functional Mater. Lett., 6(01), 1350007-1350001-1350007-1350005 (2013), DOI:10.1142/ S1793604713500070.
Zhu H, Zhou M, Zeng Z, Xiao G, Xiao R, Korean J. Chem. Eng., 31(4), 593 (2014)
Yuan QQ, Zhang DM, van Haandel L, Ye FY, Xue T, Hensen EJM, Guan YJ, J. Mol. Catal. A-Chem., 406, 58 (2015)
Yan K, Chen AC, Fuel, 115, 101 (2014)
Sulmonetti TP, Pang SH, Claure MT, Lee S, Cullen DA, Agrawal PK, Jones CW, Appl. Catal. A: Gen., 517, 187 (2016)
Halilu A, Ali TH, Atta AY, Sudarsanam P, Bhargava SK, Abd Hamid SB, Energy Fuels, 30(3), 2216 (2016)
Vargas-Hernandez D, Rubio-Caballero JM, Santamaria-Gonzalez J, Moreno-Tost R, Merida-Robles JM, Perez-Cruz MA, Jimenez-Lopez A, Hernandez-Huesca R, Maireles-Torres P, J. Mol. Catal. A-Chem., 383-384, 106 (2014)
Manikandan M, Venugopal AK, Nagpure AS, Chilukuri S, Raja T, RSC Adv., 6(5), 3888 (2016)
Nagaraja BM, Padmasri AH, Raju BD, Rao KSR, J. Mol. Catal. A-Chem., 265(1-2), 90 (2007)
Sharma RV, Das U, Sammynaiken R, Dalai AK, Appl. Catal. A: Gen., 454, 127 (2013)
Villaverde MM, Garetto TF, Marchi AJ, Catal. Commun., 58, 6 (2015)
Li J, Liu JI, Zhou HJ, Fu Y, ChemSusChem, 9(11), 1339 (2016)
Li M, Hao Y, Cardenas-Lizana F, Keane MA, Catal. Commun., 69, 119 (2015)
Yan K, Chen AC, Energy, 58, 357 (2013)
Kijenski J, Winiarek P, Paryjczak T, Lewicki A, Mikolajska A, Appl. Catal. A: Gen., 233(1-2), 171 (2002)
Merlo AB, Vetere V, Ruggera JF, Casella ML, Catal. Commun., 10(13), 1665 (2009)
Yan K, Liao J, Wu X, Xie X, RSC Adv., 3(12), 3853 (2013)
Li HX, Luo HS, Zhuang L, Dai WL, Qiao MH, J. Mol. Catal. A-Chem., 203(1-2), 267 (2003)
Lesiak M, Binczarski M, Karski S, Maniukiewicz W, Rogowski J, Szubiakiewicz E, Berlowska J, Dziugan P, Witonska I, J. Mol. Catal. A-Chem., 395, 337 (2014)
An K, Musselwhite N, Kennedy G, Pushkarev VV, Baker LR, Somorjai GA, J. Colloid Interface Sci., 392, 122 (2013)
Xu Y, Qiu S, Long J, Wang C, Chang J, Tan J, Liu Q, Ma L, Wang T, Zhang Q, RSC Adv., 5(111), 91190 (2015)
Xu C, Zheng L, Liu J, Huang Z, Chin. J. Chem., 29(4), 691 (2011)
Zhao B, Chen MY, Guo QX, Fu Y, Electrochim. Acta, 135, 139 (2014)
Fulajtarova K, Sotak T, Hronec M, Vavra I, Dobrocka E, Omastova M, Appl. Catal. A: Gen., 502, 78 (2015)
Nakagawa Y, Takada K, Tamura M, Tomishige K, ACS Catal., 4(8), 2718 (2014)
Nagaraja BM, Padmasri AH, Raju BD, Rao KSR, Int. J. Hydrog. Energy, 36(5), 3417 (2011)
Aldosari OF, Iqbal S, Miedziak PJ, Brett GL, Jones DR, Liu X, Edwards JK, Morgan DJ, Knight DK, Hutchings GJ, Catal. Sci. Technol., 6(1), 234 (2016)
Nagaraja BM, Kumar VS, Shasikala V, Padmasri AH, Sreedhar B, Raju BD, Rao KS, Catal. Commun., 4(6), 287 (2003)
Cui HM, Wu XF, Chen YF, Zhang JK, Boughton RI, Mater. Res. Bull., 61, 511 (2015)
Estrup AJ, Selective Hydrogenation of Furfural to Furfuyl Alcohol over Copper Magnesium Oxide. MSc, University of Maine (2015).
Liu H, Hu Q, Fan G, Yang L, Li F, Catal. Sci. Technol., 5(8), 3960 (2015)
Lu CY, Wey MY, Fu YH, Appl. Catal. A: Gen., DOI:http://dx.doi.org/10.1016/j.apcata.2008.03.036, 344(1-2), 36 (2008)
Pachamuthu MP, Srinivasan VV, Maheswari R, Shanthi K, Ramanathan A, Catal. Sci. Technol., 3(12), 3335 (2013)
Jensen JR, Johannessen T, Livbjerg H, Appl. Catal. A: Gen., 266(1), 117 (2004)
Huang ZW, Liu HL, Cui F, Zuo JL, Chen J, Xia CG, Catal. Today, 234, 223 (2014)
Motjope TR, Dlamini HT, Hearne GR, Coville NJ, Catal. Today, 71(3), 335 (2002)
Mallik S, Dash SS, Parida KM, Mohapatra BK, J. Colloid Interface Sci., 300(1), 237 (2006)
Liu DX, Zemlyanov D, Wu TP, Lobo-Lapidus RJ, Dumesic JA, Miller JT, Marshall CL, J. Catal., 299, 336 (2013)
Zhang HB, Canlas C, Kropf AJ, Elam JW, Dumesic JA, Marshall CL, J. Catal., 326, 172 (2015)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로