Articles & Issues
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received April 8, 2018
Accepted July 18, 2018
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
All issues
Comparison study of naphthalene adsorption on activated carbons prepared from different raws
School of Chemistry and Chemical Engineering/The Key Lab. for Green Processing of Chemical Engineering of Xinjiang Bingtuan, Shihezi University, Shihezi 832003, P. R. China 1College of Materials Science and Engineering, State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, P. R. China
wuzhans@126.com
Korean Journal of Chemical Engineering, October 2018, 35(10), 2086-2096(11), 10.1007/s11814-018-0124-7
Download PDF
Abstract
Five activated carbons (ACs) from apricot shells (ACAS), mixture of lignin and cellulose (ACLC), wood (ACW), walnut shells (ACWS), and coal (CAC) were prepared and used as adsorbents to study the adsorption behavior of naphthalene. All ACs were characterized by scanning electron microscopy, N2 adsorption-desorption method, Xrayphotoelectron spectroscopy, and elemental analysis. The effects of initial concentration, contact time, ionic strength, pH, and temperature on the adsorption of ACs for naphthalene were examined. Results show that CAC exhibit higher micropore specific surface area and contain more C-O bond than other ACs. Except for ACW, CAC is the least polar or the most hydrophobic adsorbent among ACs. This finding may be helpful in the formation of hydrogen bonding between CAC and naphthalene. The adsorption quantity of CAC was 227.03mg g-1 at 303 K, which was considerably higher compared with that of other ACs. The kinetics process of naphthalene on all ACs was controlled by pseudo-second- order kinetic model. The adsorption equilibrium of naphthalene on ACs was reached at 40min. The adsorption isotherms of naphthalene to ACs were consistent with the Freundlich isotherm model. The result of thermodynamic analysis shows that the adsorption occurs spontaneously. Moreover, the higher starting naphthalene concentration and lower adsorption temperature significantly can enhance the adsorption capacity of CAC. The maximum adsorption value of naphthalene on ACs was also observed at pH 4 under the same conditions. Moreover, the increase in ionic strength slightly promotes the adsorption of naphthalene on ACs. The microporous structure, element content and surface functional group of ACs affect its adsorption capacity.
References
Li N, Cheng W, Pan Y, J. Environ. Prot. Ecol., 8, 416 (2017)
Ge XY, Tian F, Wu ZL, Yan YJ, Cravotto G, Wu ZS, Chem. Eng. Process., 91, 67 (2015)
Sun Z, Wu Z, Liu D, He X, Korean J. Chem. Eng., 35(2), 557 (2018)
Cai SS, Syage JA, Hanold KA, Balogh MP, Anal. Chem., 81, 2123 (2009)
Cabal B, Budinova T, Ania CO, Tsyntsarski B, Parra JB, Petrova B, J. Hazard. Mater., 161(2-3), 1150 (2009)
Gan S, Lau EV, Ng HK, J. Hazard. Mater., 172(2-3), 532 (2009)
Regti A, Laamari MR, Stiriba SE, Haddad ME, Microchem J., 130, 129 (2017)
Aljeboree AM, Alshirifi AN, Alkaim AF, Arab. J. Chem., 150, S3381 (2014)
Mahmood T, Ali R, Naeem A, Hamayun M, Aslam M, Process Saf. Environ. Protect., 109, 548 (2017)
Marzbali MH, Esmaieli M, Abolghasemi H, Marzbali MH, Process Saf. Environ. Protect., 102, 700 (2016)
Mussatto SI, Fernandes M, Rocha GJM, Orfao JJM, Teixeira JA, Roberto IC, Bioresour. Technol., 101(7), 2450 (2010)
Foo KY, Hameed BH, Bioresour. Technol., 111, 425 (2012)
Nazari G, Abolghasemi H, Esmaieli M, Pouya ES, Appl. Surf. Sci., 375, 144 (2016)
Xiao H, Peng H, Deng SH, Yang XY, Zhang YZ, Li YW, Bioresour. Technol., 111, 127 (2012)
Yeganeh MM, Kaghazchi T, Soleimani M, Chem. Eng. Technol., 29(10), 1247 (2006)
Canellas J, Femenia A, Rossello C, Soler L, J. Sci. Food Agric., 59, 269 (1992)
Fan L, Chen J, Guo J, Jiang X, Jiang W, J. Anal. Appl. Pyrolysis, 104, 353 (2013)
Nazari G, Abolghasemi H, Esmaieli M, Assar M, Water Treat., 57, 27339 (2016)
Thue PS, dos Reis GS, Lima EC, Sieliechi JM, Dotto SL, Wamba AGN, Dias SLP, Pavan FA, Res. Chem. Intermediat., 43, 1 (2016)
Asadullah M, Jahan I, Ahmed MB, Adawiyah P, Malek NH, Rahman MS, Ind. Eng. Chem. Res., 20, 887 (2014)
Yu HR, Cho S, Jung MJ, Lee YS, Microporous Mesoporous Mater., 172, 131 (2013)
Yang W, Wang Y, Sharma P, Li B, Liu K, Colloids Surf. A: Physicochem. Eng. Asp., 530, 146 (2017)
Liu Q, Zheng T, Wang P, Guo L, Ind. Crop. Prod., 31, 233 (2010)
Wei XH, Wu ZS, Wu ZL, Ye BC, Powder Technol., 329, 207 (2018)
Chen B, Zhou D, Zhu L, Environ. Sci. Technol., 42, 5137 (2008)
Elhafez SE, Hamad HA, Zaatout AA, Malash GF, Environ. Sci. Pollut. Res. Int., 24, 1 (2017)
Ho YS, J. Hazard. Mater., 136(3), 681 (2006)
Dowaidar AM, EI-Shahawi MS, Ashour I, Sci. Technol., 42, 3609 (2007)
Ramachandran P, Vairamuthu R, Ponnusamy S, J. Eng. Appl. Sci., 6, 15 (2011)
Tan IAW, Ahmad AL, Hameed BH, J. Hazard. Mater., 164(2-3), 473 (2009)
Tan IAW, Chan JC, Hameed BH, Lim LLP, J. Water Process Eng., 14, 60 (2016)
Zhu M, Yao J, Dong L, Sun J, Chemosphere, 144, 1645 (2016)
Ghaedi M, Daneshyar A, Asfaram A, Purkait MK, Rsc. Adv., 6, 54322 (2016)
Valderrama C, Gamisans X, de las Heras X, Farran A, Cortina JL, J. Hazard. Mater., 157(2-3), 386 (2008)
Prajapati YN, Bhaduri B, Joshi HC, Srivastava A, Verma N, Chemosphere, 155, 62 (2016)
Radwan EK, Hany H, Ghafar A, Moursy AS, Langford CH, Bedair AH, Achari G, Environ. Sci. Pollut. Res., 22, 12035 (2015)
Yang X, Li J, Wen T, Ren X, Huang Y, Wang X, Colloids Surf. A: Physicochem. Eng. Asp., 422, 1 (2013)
Zhou Y, Lu P, Lu J, Carbohydr. Polym., 88, 502 (2012)
Zhu M, Tian W, Chai H, Yao J, Korean J. Chem. Eng., 34(4), 1073 (2017)
Ge XY, Tian F, Wu ZL, Yan YJ, Cravotto G, Wu ZS, Chem. Eng. Process., 91, 67 (2015)
Sun Z, Wu Z, Liu D, He X, Korean J. Chem. Eng., 35(2), 557 (2018)
Cai SS, Syage JA, Hanold KA, Balogh MP, Anal. Chem., 81, 2123 (2009)
Cabal B, Budinova T, Ania CO, Tsyntsarski B, Parra JB, Petrova B, J. Hazard. Mater., 161(2-3), 1150 (2009)
Gan S, Lau EV, Ng HK, J. Hazard. Mater., 172(2-3), 532 (2009)
Regti A, Laamari MR, Stiriba SE, Haddad ME, Microchem J., 130, 129 (2017)
Aljeboree AM, Alshirifi AN, Alkaim AF, Arab. J. Chem., 150, S3381 (2014)
Mahmood T, Ali R, Naeem A, Hamayun M, Aslam M, Process Saf. Environ. Protect., 109, 548 (2017)
Marzbali MH, Esmaieli M, Abolghasemi H, Marzbali MH, Process Saf. Environ. Protect., 102, 700 (2016)
Mussatto SI, Fernandes M, Rocha GJM, Orfao JJM, Teixeira JA, Roberto IC, Bioresour. Technol., 101(7), 2450 (2010)
Foo KY, Hameed BH, Bioresour. Technol., 111, 425 (2012)
Nazari G, Abolghasemi H, Esmaieli M, Pouya ES, Appl. Surf. Sci., 375, 144 (2016)
Xiao H, Peng H, Deng SH, Yang XY, Zhang YZ, Li YW, Bioresour. Technol., 111, 127 (2012)
Yeganeh MM, Kaghazchi T, Soleimani M, Chem. Eng. Technol., 29(10), 1247 (2006)
Canellas J, Femenia A, Rossello C, Soler L, J. Sci. Food Agric., 59, 269 (1992)
Fan L, Chen J, Guo J, Jiang X, Jiang W, J. Anal. Appl. Pyrolysis, 104, 353 (2013)
Nazari G, Abolghasemi H, Esmaieli M, Assar M, Water Treat., 57, 27339 (2016)
Thue PS, dos Reis GS, Lima EC, Sieliechi JM, Dotto SL, Wamba AGN, Dias SLP, Pavan FA, Res. Chem. Intermediat., 43, 1 (2016)
Asadullah M, Jahan I, Ahmed MB, Adawiyah P, Malek NH, Rahman MS, Ind. Eng. Chem. Res., 20, 887 (2014)
Yu HR, Cho S, Jung MJ, Lee YS, Microporous Mesoporous Mater., 172, 131 (2013)
Yang W, Wang Y, Sharma P, Li B, Liu K, Colloids Surf. A: Physicochem. Eng. Asp., 530, 146 (2017)
Liu Q, Zheng T, Wang P, Guo L, Ind. Crop. Prod., 31, 233 (2010)
Wei XH, Wu ZS, Wu ZL, Ye BC, Powder Technol., 329, 207 (2018)
Chen B, Zhou D, Zhu L, Environ. Sci. Technol., 42, 5137 (2008)
Elhafez SE, Hamad HA, Zaatout AA, Malash GF, Environ. Sci. Pollut. Res. Int., 24, 1 (2017)
Ho YS, J. Hazard. Mater., 136(3), 681 (2006)
Dowaidar AM, EI-Shahawi MS, Ashour I, Sci. Technol., 42, 3609 (2007)
Ramachandran P, Vairamuthu R, Ponnusamy S, J. Eng. Appl. Sci., 6, 15 (2011)
Tan IAW, Ahmad AL, Hameed BH, J. Hazard. Mater., 164(2-3), 473 (2009)
Tan IAW, Chan JC, Hameed BH, Lim LLP, J. Water Process Eng., 14, 60 (2016)
Zhu M, Yao J, Dong L, Sun J, Chemosphere, 144, 1645 (2016)
Ghaedi M, Daneshyar A, Asfaram A, Purkait MK, Rsc. Adv., 6, 54322 (2016)
Valderrama C, Gamisans X, de las Heras X, Farran A, Cortina JL, J. Hazard. Mater., 157(2-3), 386 (2008)
Prajapati YN, Bhaduri B, Joshi HC, Srivastava A, Verma N, Chemosphere, 155, 62 (2016)
Radwan EK, Hany H, Ghafar A, Moursy AS, Langford CH, Bedair AH, Achari G, Environ. Sci. Pollut. Res., 22, 12035 (2015)
Yang X, Li J, Wen T, Ren X, Huang Y, Wang X, Colloids Surf. A: Physicochem. Eng. Asp., 422, 1 (2013)
Zhou Y, Lu P, Lu J, Carbohydr. Polym., 88, 502 (2012)
Zhu M, Tian W, Chai H, Yao J, Korean J. Chem. Eng., 34(4), 1073 (2017)
