ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received August 1, 2018
Accepted December 30, 2018
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Control of a wastewater treatment plant using relay auto-tuning

School of Chemical Engineering, Yeungnam University, Gyeongsan 38541, Korea
Korean Journal of Chemical Engineering, April 2019, 36(4), 505-512(8), mynlee@ynu.ac.kr
downloadDownload PDF

Abstract

Efficient performance of a wastewater treatment plant largely depends on optimal process control. Owing to their complexity and nonlinearity, such processes are difficult to control. In this study, relay auto tuning method is analyzed to design of a proportional integral derivative controller for the activated sludge biological process. The process is estimated as a first-order process with time delay. The key control variable in wastewater treatment is the concentration of dissolved oxygen during the aeration process. The influence of higher order harmonics on the system critical values is considered during the design using preload relay and a modified two-step relay. The system performance was evaluated for both servo and regulatory mechanisms. In addition, the designed controller was tested in the presence of noise for the robustness analysis.

References

Tchamna R, Lee MY, Korean J. Chem. Eng., 34(12), 3067 (2017)
Tchamna R, Lee M, Korean J. Chem. Eng., 34(4), 961 (2017)
Wang QG, Lee TH, Lin C, Springer, London (2003).
Yu CC, Springer, London (2006).
Atherton DP, Ind. Eng. Chem. Res., 45(12), 4075 (2006)
Majhi S, Cengage Learning, Delhi (2009).
Jeon CH, Cheon YJ, Lee J, Sung SW, Korean J. Chem. Eng., 28(11), 2116 (2011)
Liu T, Wang QG, Huang HP, J. Process Control, 23(10), 1597 (2013)
Boiko I, Springer, London (2013).
Chidambaram M, Vivek S, Cambridge University Press, New Delhi (2014).
Shen SH, Yu HD, Yu CC, Chem. Eng. Sci., 51(8), 1187 (1996)
Huang HP, Chen CC, SAMS, 29, 163 (1997)
Ramakrishnan V, Chidambaram M, Comput. Chem. Eng., 27(12), 1779 (2003)
Kim JS, Byeon J, Sung SW, Lee J, Ryoo W, Edgar TF, Int. J. of Cont., Automation, and Systs., 9, 294 (2011).
Baruah G, Majhi S, Mahanta C, 2016 Indian Control Conference (ICC), 450 (2016).
Akay B, Ertunc S, Boyacioglu H, Hapoglu H, Alpbaz M, Korean J. Chem. Eng., 28(3), 837 (2011)
Brdys MA, Konarzcak K, IFAC Proceedings, 34, 539 (2001)
Brdys MA, Diaz-Maiquez J, IFAC Proceedings, 35, 35 (2002)
Rosen C, A Chemometric Approach to Process Monitoring and Control-with Applications to wastewater Treatment Operation, Sweden (2001).
Krause K, Bocker K, Londong J, Water Sci. Technol., 45(4-5), 413 (2002)
Sanchez A, Katebi MR, 2003 European Control Conference (ECC), 2424 (2003).
Chotkowski W, Brdys MA, Konarczak K, Int. J. Syst. Sci., 36(12), 727 (2005)
Gerksic S, Vrecko D, Hvala N, Water Sci. Technol., 53, 283 (2206)
Holenda B, Development of Modeling, Control and Optimization Tools for the Activated Sludge Process, Hungary (2007).
Tzoneva R, AFRICON 2007, 1 (2007).
Piotrowski R, Brdys MA, Konarczak K, Duzinkiewicz K, Chotkowski W, Control Eng. Practice, 16, 114 (2008)
Han Y, Brdys MA, Piotrowski R, IFAC Proceedings, 41, 13587 (2008)
Thunberg A, Sundin AM, Carlsson B, 10th IWA Conference on Instrumentation, Control & Automation (2009).
Ziegler JG, Nichols NB, Trans. ASME, 64, 759 (1942)
Astrom KJ, Hagglund T, Automatica, 20, 645 (1984)
Luyben WL, Ind. Eng. Chem. Res., 40(20), 4391 (2001)
Li W, Eskinat E, Luyben WL, Ind. Eng. Chem. Res., 30, 1530 (1991)
Lee TH, Wang QG, Tan KK, IEEE Trans. Control Syst. Technol, 3, 330 (1995)
Sung SW, Park JH, Lee IB, Ind. Eng. Chem. Res., 34(11), 4133 (1995)
Sung SW, Lee IB, Ind. Eng. Chem. Res., 36(12), 5526 (1997)
Friman M, Waller KV, Ind. Eng. Chem. Res., 36(7), 2662 (1997)
Srinivasan K, Chidambaram M, Chem. Biochem. Eng. Q., 18, 249 (2004)
Tan KK, Lee TH, Huang S, Chua KY, Ferdous R, J. Process Control, 16(5), 445 (2006)
Je CH, Lee J, Sung SW, Lee DH, J. Process Control, 19(2), 353 (2009)
Jeon CH, Cheon YJ, Kim JS, Lee J, Sung SW, J. Process Control, 20(1), 228 (2010)
Vangsgaard AK, Mauricio-Iglesias M, Gernaey KV, Smets BF, Sin G, Bioresour. Technol., 123, 230 (2012)
Sundaresan KR, Prasad CC, Krishnaswamy PR, Ind. Eng. Chem. Process Des. Dev., 17, 237 (1978)
O’Dwyer, Imperial College Press (2009).

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로