ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received March 16, 2019
Accepted May 15, 2019
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Development of an advanced hybrid process coupling TiO2 photocatalysis and zeolite-based adsorption for water and wastewater treatment

Dongguk University, Wonheung-gwan F619 30, Pildong-ro 1gil, Jung-gu, Seoul 04620, Korea 1Environmental Technology Division, Korea Testing Laboratory, 87, Digital-ro 26-gil, Guro-gu, Seoul 08389, Korea
pjhoon@dongguk.edu
Korean Journal of Chemical Engineering, July 2019, 36(7), 1201-1207(7), 10.1007/s11814-019-0300-4
downloadDownload PDF

Abstract

We present an advanced hybrid process coupling a fixed-bed photocatalysis reactor with the TiO2 photocatalyst film coated on microstructured α-Al2O3 hollow fibers (AlHF) under UV exposure, with a second fixed-bed reactor where the zeolite-based adsorbent is fixed onto AlHF support for water and wastewater treatment. The physicochemical properties of both coated films were investigated by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) method, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX). The sequential activity of the dual fixed bed reactor was overall evaluated by examining the degradation of 20 ppm Methylene Blue (MB), 1 ppm Iron and 0.04 ppm Arsenic solution as a general model of a complex aqueous solution containing not only an organic pollutant but also heavy metal and toxic cations. The results show that the proposed hybrid process by coupling two processes together could remove MB, Fe (II), and As (III) effectively, and the removal rates reached nearly 90%, 30%, and 70%, respectively, in 1 hour. These excellent results using the UV-TiO2/zeolite-based adsorbent combined process could be attributed to a synergistic effect between photocatalysis and adsorption process.

References

Hashimoto K, Irie H, Fujishima A, Jpn. J. Appl. Phys., 44, 8269 (2005)
Wu CH, Chern JM, Ind. Eng. Chem. Res., 45(19), 6450 (2006)
Lee HJ, Park YG, Lee SH, Park JH, Korean Chem. Eng. Res., 56(2), 156 (2018)
Kim SH, Jeong SG, Na SE, Kim SY, Ju CS, Korean Chem. Eng. Res., 51(2), 195 (2013)
Jeong SH, Kim JK, Kim BS, Shim SH, Lee BT, Vacuum, 76, 507 (2004)
Lobl P, Huppertz M, Mergel D, Thin Solid Films, 251(1), 72 (1994)
Yamagishi M, Kuriki S, Song PK, Shigesato Y, Thin Solid Films, 442(1-2), 227 (2003)
Lien SY, Wuu DS, Yeh WC, Liu JC, Sol. Energy Mater. Sol. Cells, 90(16), 2710 (2006)
Guillard C, Beaugiraud B, Dutriez C, Herrmann JM, Jaffrezic H, Jaffrezic-Renault N, Lacroix M, Appl. Catal. B: Environ., 39(4), 331 (2002)
Hur JY, Lee HI, Park YK, Joo OS, Bae GN, Kim JM, Korean Chem. Eng. Res., 44(4), 399 (2006)
Zhang XW, Lei LC, Appl. Surf. Sci., 254(8), 2406 (2008)
Ding Z, Hu XJ, Yue PL, Lu GQ, Greenfield PF, Catal. Today, 68(1-3), 173 (2001)
Byun D, Jin Y, Kim B, Lee JK, Park D, J. Hazard. Mater., 73(2), 199 (2000)
Jung SC, Kim SC, Seo SG, Korean Chem. Eng. Res., 39, 385 (2001)
Magnone E, Kim MK, Lee HJ, Park JH, Ceram. Int., 45, 3359 (2019)
El-Bayaa AA, Badawy NA, AlKhalik EA, J. Hazard. Mater., 170(2-3), 1204 (2009)
Park SH, Park SM, An J, Park CG, Desalination Water Treat., 123, 150 (2018)
Shi WY, Shao HB, Li H, Shao MA, Du S, J. Hazard. Mater., 170(1), 1 (2009)
Sadowska K, Gora-Marek K, Datka J, J. Phys. Chem.0 C, 117, 9237 (2013)
Chang CC, Teixeira AR, Li C, Dauenhauer PJ, Fan W, Langmuir, 29(45), 13943 (2013)
Huang A, Wang N, Caro J, Microporous Mesoporous Mater., 164, 294 (2012)
Lu L, Zhang Y, Xiao P, Zhang X, Yang Y, Environ. Eng. Sci., 27, 281 (2010)
Xu C, Rangaiah GP, Zhao XS, Ind. Eng. Chem. Res., 53(38), 14641 (2014)
Yu W, Liu XJ, Pan LK, Li JL, Liu JY, Zhang J, Li P, Chen C, Sun Z, Appl. Surf. Sci., 319, 107 (2014)
Dariania RS, Esmaeili A, Mortezaali A, Dehghanpour S, Optik, 127, 7143 (2016)
Taghvaei H, Farhadian M, Davari N, Maazi S, Adv. Environ. Technol., 4, 205 (2017)
Magnone E, Lee HJ, Che JW, Park JH, J. Ind. Eng. Chem., 42, 19 (2016)
Kim SW, Kang M, Choung SJ, J. Ind. Eng. Chem., 11(3), 416 (2005)
Manocha SM, Sadhana, 28, 335 (2003)
Simsek EB, Ozdemir E, Beker U, Chem. Eng. J., 220, 402 (2013)
Mohan D, Pittman CU, J. Hazard. Mater., 142(1-2), 1 (2007)
Setoyama N, Suzuki T, Kaneko K, Carbon, 36, 1459 (1998)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로