ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received April 2, 2020
Accepted May 15, 2020
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Formation of CaCO3 from calcium sources with different anions in single process of CO2 capture-mineralization

Climate Change Research Division, Korea Institute of Energy Research (KIER), 152 Gajeong-ro, Yuseong-gu, Daejeon 34129, Korea 1Platform Technology Laboratory, Korea Institute of Energy Research (KIER), 152 Gajeong-ro, Yuseong-gu, Daejeon 34129, Korea
jeongsk@kier.re.kr
Korean Journal of Chemical Engineering, October 2020, 37(10), 1709-1716(8), 10.1007/s11814-020-0583-5
downloadDownload PDF

Abstract

The single process CO2 capture-mineralization approach integrates methods of CO2 absorption using aqueous solvents and mineral carbonation technology to not only remove carbon dioxide quickly, but also to simultaneously produce precipitated calcium carbonate (PCC). To develop a more sustainable process, it is important to extract calcium from inexpensive raw materials such as industrial by-products. The extractant has a significant effect on the quality of the calcium carbonate produced because it determines the anion paired with the calcium cation. In this work, several calcium sources with different anions (Propionate, Acetate, Nitrate and Chloride) were applied in the single process CO2 capture-mineralization method, and their influence on the polymorph of the obtained CaCO3 was investigated. The CaCO3 produced with inorganic calcium sources predominantly exhibited a calcite structure, while the CaCO3 produced with organic calcium sources had a structure in which vaterite and calcite coexist. This result was in good agreement with our DFT calculations, which indicated the adsorption energy of the organic anions (Propionate and Acetate) were lower than the inorganic anions on the surface of vaterite. Except for chloride with its non-polar nature, in most cases, there was a strong correlation between the polymorph and the adsorption energy calculated for each surface. A mechanism for the polymorph CaCO3 formation in our single process CO2 capture-mineralization method was proposed after observing crystal formation at low concentration.

References

Jarvis SM, Samsatli S, Renew. Sust. Energ. Rev., 85, 46 (2018)
Cuellar-Franca RM, Azapagic A, J. CO2 Util., 9, 82 (2015)
Sanna A, Uibu M, Caramanna G, Kuusik R, Maroto-Valer MM, Chem. Soc. Rev., 43, 8049 (2014)
Bhaduri GA, Siller L, Catal. Sci. Technol., 3, 1234 (2013)
Zevenhoven R, Teir S, Eloneva S, Proc. 19th Int. Conf. Efficiency Costs, Optimization, Simulation and Environmental Impact of Energy Systems, 33, 1661 (2006).
Lee SM, Lee SH, Jeong SK, Youn MH, Nguyen DD, Chang SW, Kim SS, J. Ind. Eng. Chem., 53, 233 (2017)
Sun Y, Yao MS, Zhang JP, Yang G, Chem. Eng. J., 173(2), 437 (2011)
Zhao Q, Liu CJ, Jiang MF, Saxen H, Zevenhoven R, Miner. Eng., 79, 116 (2015)
Teir S, Revitzer H, Eloneva S, Fogelholm CJ, Zevenhoven R, Int. J. Miner. Process., 83(1-2), 36 (2007)
Park AHA, Fan LS, Chem. Eng. Sci., 59(22-23), 5241 (2004)
Ibrahim M, El-Naas M, Benamor A, Al-Sobhi S, Zhang Z, Processes, 7, 115 (2019)
Alamdari A, Alamdari A, Mowla D, J. Ind. Eng. Chem., 20(5), 3480 (2014)
Iizuka A, Fujii M, Yamasaki A, Yanagisawa Y, Ind. Eng. Chem. Res., 43(24), 7880 (2004)
Lopez-Periago AM, Pacciani R, Garcia-Gonzalez C, Vega LF, Domingo C, J. Supercrit. Fluids, 52(3), 298 (2010)
Vinoba M, Bhagiyalakshmi M, Choi SY, Park KT, Kim HJ, Jeong SK, J. Phys. Chem. C, 118, 17556 (2014)
Arti M, Youn MH, Park KT, Kim HJ, Kim YE, Jeong SK, Energy Fuels, 31(1), 763 (2017)
Murnandari A, Kang J, Youn MH, Park KT, Kim HJ, Kang SP, Jeong SK, Korean J. Chem. Eng., 34(3), 935 (2017)
Vinoba M, Bhagiyalakshmi M, Grace AN, Chu DH, Nam SC, Yoon Y, Yoon SH, Jeong SK, Langmuir, 29(50), 15655 (2013)
Kang JM, Murnandari A, Youn MH, Lee W, Park KT, Kim YE, Kim HJ, Kang SP, Lee JH, Jeong SK, Chem. Eng. J., 335, 338 (2018)
Bao WJ, Li HQ, Zhang Y, Ind. Eng. Chem. Res., 49(5), 2055 (2010)
Kresse G, Joubert D, Phys. Rev. B, 59, 1758 (1999)
Kresse G, Furthmuller J, Phys. Rev. B, 54, 11169 (1996)
Perdew JP, Burke K, Ernzerhof M, Phys. Rev. Lett., 78, 1396 (1997)
Liang Y, Lea AS, Baer DR, Engelhard MH, Surf. Sci., 351, 172 (1996)
Bano AM, Rodger PM, Quigley D, Langmuir, 30(25), 7513 (2014)
Grimme S, Antony J, Ehrlich S, Krieg H, J. Chem. Phys., 132, 154104 (2010)
Stowe HM, Vilciauskas L, Paek E, Hwang GS, Phys. Chem. Chem. Phys., 17, 29184 (2015)
Andreassen JP, J. Cryst. Growth, 274(1-2), 256 (2005)
Balmain J, Hannoyer B, Lopez E, J. Biomed. Mater. Res., 48, 342 (1999)
Maslen EN, Streltsov VA, Streltsova NR, Acta Crystallogr. Sect. B-Struct. Sci., 49, 636 (1993)
Duffy DM, Harding JH, J. Mater. Chem., 12, 3419 (2002)
de Leeuw NH, Parker SC, J. Phys. Chem. B, 102(16), 2914 (1998)
Lardge JS, Duffy DM, Gillan MJ, J. Phys. Chem. C, 113, 7207 (2009)
Ataman E, Andersson MP, Ceccato M, Bovet N, Stipp SLS, J. Phys. Chem. C, 120, 16586 (2016)
Okhrimenko DV, Nissenbaum J, Andersson MP, Olsson MHM, Stipp SLS, Langmuir, 29(35), 11062 (2013)
Kralj D, Brecevic L, Nielsen AE, J. Cryst. Growth, 104, 793 (1990)
Kralj D, Brecevic L, Nielsen AE, J. Cryst. Growth, 143, 269 (1994)
Trushina DB, Bukreeva V, Kovalchuk MV, Antipina MN, Mater. Sci. Eng. C-Biomimetic Supramol. Syst., 45, 644 (2015)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로