ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received March 2, 2020
Accepted April 27, 2020
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Enhanced Cr tolerance of perovskite oxide via Gd0.1Ce0.9O2 surface modifications

Department of Mechanical Engineering, Sungkyunkwan University, Suwon 16419, Korea
Korean Journal of Chemical Engineering, August 2020, 37(8), 1346-1351(6), 10.1007/s11814-020-0562-x
downloadDownload PDF

Abstract

Cr poisoning of the SUS interconnect and the solid oxide fuel cell electrode is one of the crucial hurdles to achieving system sustainability. Among various approaches to solving this issue, the suppression of cation segregation, especially Sr, and preventing the electrode surface from direct exposure to Cr-gas have been considered the most important factors. Herein, the effect of surface coating on mitigating Sr segregation as well as the use of strategies for protecting the electrode surface from exposure to Cr gas are discussed. Using Sm0.5Sr0.5CoO3(SSC) as a model film electrode and Gd0.1Ce0.9O2 (GDC) as the coating layer via a pulsed laser deposition (PLD) method, the Cr tolerance of the perovskite oxide electrode was enhanced. Electrochemical measurement at 650 °C for 200 h showed ~2.5 times higher stability of the GDC-coated SSC electrode than the bare SSC electrode. Using Auger electron spectroscopy (AES), the chemical states of the GDC-coated SSC electrode were characterized, revealing significantly reduced Sr and Cr intensity on the surface of the coated electrode when compared to the bare SSC electrode.

References

Wachsman ED, Lee KT, Science, 334(6058), 935 (2011)
Yang ZG, Weil KS, Paxton DM, Stevenson JW, J. Electrochem. Soc., 150(9), A1188 (2003)
Zanchi E, Talic B, Sabato A, Molin S, Boccaccini A, Smeacetto F, J. European Ceram. Soc., 39, 3768 (2019)
Hou PY, Huang K, Bakker WT, ECS Proceedings Volumes, 1999, 737 (1999)
Ni N, Cooper SJ, Williams R, Kemen N, McComb DW, Skinner SJ, ACS Appl. Mater. Interfaces, 8, 17360 (2016)
Chen Y, Yoo S, Li X, Ding D, Pei K, Chen D, Ding Y, Zhao B, Murphy R, Deglee B, Nano Energy, 47, 474 (2018)
Li J, Li J, Yan D, Pu J, Chi B, Jian L, Electrochim. Acta, 270, 294 (2018)
Wei B, Schroeder M, Martin M, ACS Appl. Mater. Interfaces, 10, 8621 (2018)
Lee W, Han JW, Chen Y, Cai ZH, Yildiz B, J. Am. Chem. Soc., 135(21), 7909 (2013)
Koo JY, Kwon H, Ahn M, Choi M, Son JW, Han JW, Lee W, ACS Appl. Mater. Interfaces, 10, 8057 (2018)
Horita T, Xiong YP, Kishimoto H, Yamaji K, Brito ME, Yokokawa H, J. Electrochem. Soc., 157(5), B614 (2010)
Geng SJ, Pan Y, Chen G, Wang FH, Int. J. Hydrog. Energy, 44(18), 9400 (2019)
Chen Y, Jung W, Cai Z, Kim JJ, Tuller HL, Yildiz B, Energy Environ. Sci., 5, 7979 (2012)
Jung W, Tuller HL, Energy Environ. Sci., 5, 5370 (2012)
Li Y, Zhang W, Zheng Y, Chen J, Yu B, Chen Y, Liu M, Chem. Soc. Rev., 46, 6345 (2017)
Kim D, Park JW, Yun BH, Park JH, Lee KT, ACS Appl. Mater. Interfaces, 11, 31786 (2019)
Zhao MS, Geng SJ, Chen G, Wang FH, J. Power Sources, 414, 530 (2019)
Demeneva N, Kononenko O, Matveev D, Kharton V, Bredikhin S, Mater. Lett., 240, 201 (2019)
Chen H, Guo Z, Zhang LA, Li Y, Li F, Zhang Y, Chen Y, Wang X, Yu B, Shi JM, ACS Appl. Mater. Interfaces, 10, 39785 (2018)
Wen Y, Yang T, Lee D, Lee HN, Crumlin EJ, Huang K, J. Mater. Chem. A, 6, 24378 (2018)
Tsvetkov N, Lu QY, Sun LX, Crumlin EJ, Yildiz B, Nat. Mater., 15(9), 1010 (2016)
Kim D, Bliem R, Hess F, Gallet JJ, Yildiz B, J. Am. Chem. Soc., 7, 3548 (2020)
Hess F, Yildiz B, Phys. Rev. Mater., 4, 015801 (2020)
Chen K, Li N, Ai N, Li M, Cheng Y, Rickard WD, Li J, Jiang SP, J. Mater. Chem. A, 4, 17678 (2016)
Lynch ME, Yang L, Qin W, Choi JJ, Liu M, Blinn K, Liu M, Energy Environ. Sci., 4, 2249 (2011)
Cai Z, Kubicek M, Fleig JR, Yildiz B, Chem. Mater., 24, 1116 (2012)
Jacob K, Abraham K, J. Phase Equilib., 21, 46 (2000)
Druce J, Tellez H, Burriel M, Sharp M, Fawcett L, Cook S, et al., Energy Environ. Sci., 7, 3593 (2014)
Koo B, Kwon H, Kim Y, Seo HG, Han JW, Jung W, Energy Environ. Sci., 11, 71 (2018)
Choi M, Ibrahim IAM, Kim K, Koo JY, Kim SJ, Son JW, Han JW, Lee W, ACS Appl. Mater. Interfaces, 12, 21494 (2020)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로